SmartElex Current Sensor Breakout – ACS723

Availability:

In stock


SKU: R101037
  1. DC and AC currents : 10mA up to 5A
  2. Without the op-amp has a base sensitivity of 400mV/A
  3. Sensitivity with on-board amplifier, gain from 2.2 to 22 V/V

 667.00

(Including GST)

In stock

Purchase this product now and earn 7 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
1 Year Warranty
Cash On delivery
Cash on Delivery*

Didn’t Find what you are looking for?

Brand: SmartElex
Category: Current Sensors
Tags: SmartElex, SmartElex sensor module

The SmartElex Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!
The SmartElex Current Sensor Breakout measures both DC and AC currents all the way up to 5A, has full electrical isolation of measured and sensed circuits, and has a base sensitivity of 400mV/A. Although the analog output is adjustable to 80kHz, the bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board.
Note: Although the chip itself is rated for up to 2.4kV (RMS) of isolation, the board has not been designed for such high voltage applications.


Features:

  1. Measures DC and AC currents from around 10mA up to 5A
  2. The version without the op-amp has a base sensitivity of 400mV/A
  3. Adjustable sensitivity with on-board amplifier, gain from 2.2 to 22 V/V

Package Includes:

1 x SmartElex Current Sensor Breakout – ACS723

SKU: R101037 Category: Tags: ,
Bandwidth (KHz)

20

Measuring Current Range

10mA up to 5A, AC or DC

Base Sensitivity

400mV/A

Analog Output

80kHz

Shipping Weight 0.002 kg
Shipping Dimensions 5 × 4 × 2 cm
1 Year Warranty

This item is covered with a supplier warranty of 1 year from the time of delivery against manufacturing defects only. In case of manufacturing defects or issues, we will replace the part after warranty confirmation by our technical team, but we won’t offer refunds or replace the entire product.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SmartElex Current Sensor Breakout – ACS723”

There are no reviews yet.

User Manual

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: India