SmartElex GSM/GPRS/GNSS Bluetooth HAT for Raspberry Pi

Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 195380

 2,199.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: SmartElex
Category: IOT & Wireless Modules
Tags: Raspberry Pi, GSM HAT, GSM/GPRS/GNSS Bluetooth, GNSS, raspberry Pi Navigation System

Click here to see why SmartElex is different!

As of Now, Smartlex was providing only GSM HAT separately to interface with Raspberry Pi  So now its time to integrate GSM/GPRS/GNSS clustered functions into a single device suited for Raspberry Pi. A new module has been introduced by SmartElex with these appended functionalities and it is named as per its properties, GSM/GPRS/GNSS Bluetooth HAT

SmartElex GSM/GPRS/GNSS HAT connects your Raspberry Pi to a cellular GSM Network! It directly plugs onto your Raspberry Pi. HAT adjusted to the GPIO connectors compatible with Raspberry Pi3 / 2 / Zero which provides the connection to GSM, GPRS, GPS, and Bluetooth. It allows the voice chat, send SMS messages, connect to the Internet, transfer data via Bluetooth, has a navigation system. On the Board is the connector for SIM card, micro USB, 3.5 mm jack, battery and two (GSM and GPS )antenna connector.

The HAT is equipped with the Quectel M60 Module which integrates a high-performance GNSS engine and a quad-band GSM/GPRS engine. The GNSS engine is a single receiver integrating GPS, GLONASS and Galileo systems. It supports multiple positioning and navigation systems including autonomous GPS, GLONASS, SBAS for all communication with the HAT is through a serial interface. AT commands are used to configure and communicate with the HAT.

The HAT assembled with all essential hardware required for your Raspberry Pi based GSM Project which includes GSM Module, SIM Card Holder, Cellular Antenna, headphone connector, Bluetooth 3.0 with Antenna, etc. It greatly simplifies your GSM project and allows you to quick start your GSM project using all versions of Raspberry Pi

Smartelex Pritesh Sir 1


Working:
  1. Power on the raspberry pi module with the raspbian OS installed on it.
  2. Connect the SmartElex HAT to the Raspberry Pi
  3. Insert a sim card to the HAT module to perform GSM operations.
  4. After connecting the Power to HAT, the Power (PWR) led will be in an ON state.
  5. Now Press and Hold the Power key (PWR) for 3 seconds to Turn the HAT ON.(Do Same to turn it OFF)
  6. The Network(NET) LED will blink in a continuous manner and after obtaining the range for the SIM card, its blinking pattern will be Change.

HAT Connection with Raspberry Pi:
HAT Raspberry Pi Pins
Rx GPIO14 / BCM14 /UART0 Tx
Tx GPIO15 / BCM15/ UART0 Rx
Reset GPIO25 / BCM25

Jumper J1- connects RX of GPS MC60 to Tx of Raspberry Pi (GPIO14/BCM14/UART0 Tx)
Jumper J2- connects TX of GPS MC60 to Rx of Raspberry Pi (GPIO15/BCM15/UART0 Rx)


Features:

  1. Quad-band full-featured GSM/GPRS (850/ 900/ 1800/ 1900MHz).
  2. GNSS receiver channels: 99 acquisition/ 33 tracking channels
  3. Include Onboard Bluetooth BT 3.0 with an antenna.
  4. Controlled via AT commands.
  5. Autobauding 4800bps to 115200bps.
  6. Maximum download speed 85.6kbps.
  7. Send/Receive SMS
  8. Make/Receive voice call with the help of Onboard 3.5mm audio jack.
  9. Integrated the GNSS technology for satellite navigation. Multi navigation constellation: GPS/ GLONASS/ QZSS.

Package Includes:

1 xSmartElex GSM/GPRS/GNSS Bluetooth HAT.

1 x Detachable GSM Antenna.

1 x Detachable GNSS Antenna.

1 x Input Power cable.

1 x User Manual.

Operating Temperature (°C)

-35 ~ +80

Maximum download speed (kbps).

85.6

Onboard audio jack

3.5mm

GNSS receiver channels

99 acquisition/ 33 tracking channels

Board Dimensions

As per below

Length (mm):

68

Width (mm):

35.5

Height (mm):

23

Weight (g):

30

********************************************

*********************************************************************************

Antenna Parameter

As per below

Model

GYF8V13

Operating voltage (V)

3 ~ 5

Frequency

GPS L1
GLONASS G1

Connector type

SMA male

Lenth of cable (ft)

10

Shipping Weight 0.033 kg
Shipping Dimensions 8 × 6 × 3 cm
1 Year Warranty

This item is covered with a supplier warranty of 1 year from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SmartElex GSM/GPRS/GNSS Bluetooth HAT for Raspberry Pi”

There are no reviews yet.

User Manual

Quectel_MC60_GNSS_AGPS_Application_Note_V1.1

Quectel_MC60_AT_Commands_Manual_V1.2

Quectel_MC60_Series_GNSS_AT_Commands_Manual_V1.3

Quectel_MC60_Series_GNSS_Protocol_Specification_V1.1

Quectel M66 Datasheet

Questions and answers of the customers

  1. 0 votes
    A

    Hello, for your query related to interfacing ki... Read more

  2. 0 votes
    Q sir what are the pinout description of smartelex gsm/gprs/gsn answer now
    Asked by cosartificialintelligence on August 11, 2020 4:57 pm
    A

    The pin description of the raspberry pi hat is ... Read more

  3. 0 votes
    Q how to use gps in this model?? answer now
    Asked by ritesh gulghane on January 6, 2020 4:01 pm
    A

    we request you to check Read more

  4. 0 votes
    Q what are the pinouts description ( 40 pins) ??? answer now
    Asked by rijesh041 on November 11, 2019 4:49 pm
    A

    Kindly refer the below link you will get answer... Read more

Only registered users are eligible to enter questions
Country Of Origin: India

You may also like…