SP Racing F3 Flight Controller Deluxe

(4 customer reviews)
Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 45528
  1.  Stackable design – perfect for integrating with OSDs and power distribution boards.
  2. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
  3. Full support for OneShot ESCs for easy PID tuning and a sharper response.
  4. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers.
  5. No external inverters required (built-in).
  6. Dedicated output for programmable LEDs – great for orientation, racing and night flying.
  7. Dedicated I2C port for connection of OLED display without needing flight battery.
  8. Battery monitoring ports for voltage and current.
  9. Sonar support for precision low-altitude hold.
  10. Buzzer port for audible warnings and notifications.
  11. Symmetrical design for a super tidy wiring.
  12. Barometer mounted on the bottom of the board for easy wind isolation.
  13.  Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.

 2,590.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Category: Flight Controller & Accessories

The SP Racing F3 Flight Controller Deluxe was designed to give awesome flight performance based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU.

There are lots of cool features with this flight controller starting with a next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core. It also comes with a high capacity black box flight log recorder that will help you optimize your tuning without the guesswork.  Some more great features are the additional built-in sensors for altitude and direction with the barometer mounted on the bottom of the board for easy wind isolation. A dedicated output for programmable LEDs – great for orientation, racing and night flying. The no-compromise I/O supports all the features at the same time.

F3 runs the open-source Cleanflight flight control (FC) software which has an ever-growing community of friendly developers and users. Being open-source it allows you to contribute to the system. Cleanflight comes with a detailed manual that is reviewed and maintained by the Cleanflight developers and community. No more second-hand information.

The F3 Deluxe gives you all the features you need for the heart of your aircraft, whether you’re into FPV racing, acrobatic flying or aerial photography it’s perfect.

Pins and Ports:

  1. MicroUSB socket.
  2. 4x 4pin JST-SH sockets (I2C, SWD, 2xUART)
  3. 2x 8pin JST-SH sockets (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
  4. 8x 3pin through-holes for pin headers for ESC/Servo connections.
  5. 2x 4pin through-holes for pin headers for 2x serial ports.
  6. 2x 2pin through-holes for pin headers for battery voltage and buzzer.
Note:

Since this is an Open Source Flight Controller Board, there are many manufacturers who are supplying this product. We have picked up the best quality products from the market and tested them for their functionality. And finally selected best amongst them. Our product works exactly same as we have described above in the description.

 

Microsoftteams Image 55 1

 


Follow the advice below for best performance and long-life of your flight controller:
  1. Apply resin/glue to reinforce JST-SH connectors – helps if you crash your aircraft.
  2. Using an enclosure/box for the flight-controller is recommended.
  3. Install open-cell foam under the pressure sensor – sandwich some between the FC
  4. and frame.
  5. Route motor/battery wires as far away from the compass sensor (magnetometer)
  6. as possible.
  7. Only install the BOOT jumper pins if you need them.
  8. Using color-coded pin headers is recommended (not supplied), especially for VBAT
  9. headers.
  10. Do everything you can to prevent vibrations reaching the accelerometer/gyro sensor.e.g. balance props, motors, and secure everything

Features :

  1. No compromise I/O. Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED
  2. Strip + Battery Monitoring + Sonar + 8 motors – all at the same time!
  3.  On-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without
  4. guesswork ( Deluxe).
  5. Next-generation STM32 F3 processor with hardware floating point unit for efficient flight calculations and faster
  6. ARM-Cortex M4 core.
  7.  Stackable design – perfect for integrating with OSDs and power distribution boards.
  8. 16 PWM I/O lines for ESCs, Servos and legacy receivers. 8 available on standard pin headers. 8 via side mounted connectors.
  9. Full support for OneShot ESCs for easy PID tuning and a sharper response.
  10. Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
  11. Dedicated output for programmable LEDs – great for orientation, racing and night flying.
  12. Dedicated I2C port for connection of OLED display without needing flight battery.
  13. Battery monitoring ports for voltage and current.
  14. Sonar support for precision low-altitude hold.
  15. Buzzer port for audible warnings and notifications.
  16. Developer friendly debugging port (SWD) and boot mode selection, unbreakable bootloader.
  17. Symmetrical design for a super tidy wiring.
  18.  Wire up using pin headers, JST-SH sockets or solder pads. Use either right-angled or straight pin-headers.
  19. Barometer mounted on the bottom of the board for easy wind isolation.
  20. Loop times up to ~2x as fast as previous-generation STM32F1 based boards.
  21. A configuration of the flight controller via a cross-platform GUI (Windows/OSX/Linux).
  22. Supports a variety of aircraft, tri copters, quadcopters, hexacopters, octocopters, planes and more.
  23. Available in Acro and Deluxe versions.

Package Includes :

1 x SP Racing F3 Flight Controller With Case.
4 x Connecting Cables.
6 x Male Jumper Header.
SKU: 45528 Category:
Model

SP Racing F3-Deluxe

Input Voltage (V)

5 VDC

Firmware

Support KVteam, MWOSD firmware

Sensor

MPU6050-Accelerometer/Gyro, MS5611 barometer, HMC5883 compass

Processor

STM32F303 CPU, 72Mhz inc FPU

Micro-SD Card Slot

No

Dimensions in mm (LxWxH)

36 x 36 x 5 (without shell)

Weight (g):

20 with Shell

Shipping Weight 0.04 kg
Shipping Dimensions 5 × 3 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 4 reviews

4.5 overall
2
2
0
0
0

Add a review

  1. mehulPraliya8

    gud

    mehulPraliya8

  2. Manu (verified owner)

    Works well . Using clean flight . Always satisfied with the service and products.

    Manu

  3. Pawan

    Board is ok, all things work correctly but Accelerometer doesn’t work correctly in my case.

    Pawan

  4. Krishna (verified owner)

    One of the best flight controller. But the one sold by robu has an older firmware in it.

    Krishna

Questions and answers of the customers

  1. 0 votes
    Q how do you update the firmware? does the bootloader error arised with anyone
    Asked by shyam1ss15 on January 15, 2020 3:01 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…