STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board

Availability:

In stock


SKU: 1470068
  1. Product: STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board
  2. Operation up to 60 V/2.4 A
  3. Low power dissipation (RON(MAX) = 120 mΩ)
  4. Application board operating range: 12 to 33 V/0 to 2.4 A
  5.  Extended voltage operating range (J1 open) up to 60 V
  6. Application board operating range: 12 to 33 V/0 to 2.4 A
  7.  Status and diagnostic LEDs

 4,149.00

(Including GST)

In stock

Purchase this product now and earn 42 Robu Points!

Very Low Stock. Order Now !



Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Category: ARM Microcontroller

Industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible evaluation and development environment for 2A (typ) digital output modules, featuring the safe driving and smart diagnostic capabilities of the IPS160HF single high-side switch. The X-NUCLEO-OUT08A1 interfaces with the microcontroller on the STM32 Nucleo via 3KV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board and can also be stacked with another XNUCLEO-OUT08A1 or X-NUCLEO-OUT10A1. Two X-NUCLEO-OUT08A1 expansion boards allows you to evaluate a dual channel digital output module with 2A (typ.) capability each, or a 2A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one.

Note: For more technical details go through Datasheet in the attachment section


Features: 

  1. Based on IPS160HF single high-side switch, which features:
    – Operation up to 60 V/2.4 A
    – Low power dissipation (RON(MAX) = 120 mΩ)
    – Fast decay for inductive loads
    – Open load detection and diagnostics
    – Overload and overheating protections with thermal shut-down and cut-off
    – PowerSSO-12L package
  2. Application board operating range: 12 to 33 V/0 to 2.4 A
  3.  Extended voltage operating range (J1 open) up to 60 V
  4.  Status and diagnostic LEDs
  5.  3 kV galvanic isolation
  6.  Supply rail reverse polarity protection
  7.  Ready for Safety Digital Output Architecture
  8.  EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  9.  Wide application development potential in STM32 Nucleo development
    environment
  10.  Equipped with Arduino™ UNO R3 connectors

Package Includes:

1 x STMicroelectronics Expansion Board, IPS160HF, STM32 Nucleo Development Board

SKU: 1470068 Category:
Input Voltage (limit)

Up to 60V

Current Limit (A)

Up to 2.4A

Operating Voltage (V)

12 to 33V

Operating Current (A)

0 to 2.4A

Total Power Dissipation

RON(MAX) 120 m Ohms

Connectivity

Arduino™ UNO R3 connectors

Shipping Weight 0.086 kg
Shipping Dimensions 22 × 17 × 4 cm
1 Month Warranty

This item is covered with a standard warranty of 1 month from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board”

There are no reviews yet.

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China