Categories
tbs 500 frame
tbs 500 frame 2 tbs 500 frame 3

TBS 500 Glass Fiber Frame ESC Power Distribution Board With Replacement Arm and Shock Absorber

7 Review(s)
Availability: Out stock
SKU: 29582

QUICK OVERVIEW

  1. Wheelbase: 500mm
  2. Material: Carbon Fiber + Polyamide-Nylon
  3. Weight: 400 gm
  4. Moter Mounting Hole Dia.: 3 mm
  5. Arm Size: 220 x 40 (LxW) mm

 1249

(inc GST)

₹ 1058.47 (+18% GST extra)

Out of stock - Join the waitlist to be emailed when this product becomes available

This quadcopter frame with the wheelbase of 500mm is specially intended to provide lots of mounting space. It is well known for aerial video shooting and photography as it has special Gimbal housing provision at front. The TBS quadcopter frames outperform similar quads in terms of FPV range and video link quality.

It features a battery plate in the tail position. These large sized quadcopter frames equip larger motors and batteries, so increasing the power capabilities of your multirotor. This advantage results in a longer flight time, hence they are perfect for your aerial videography.

This  TBS 500 Carbon fiber frame is made from Carbon Fiber which makes it tough and durable. They have the arms of ultra-durable Polyamide Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.

It comes with PDB(Power Distribution Board) to power up the Quadcopter. And, is also designed to fit standard flight controllers/PDB, FPV cameras and also FPV transmitters and antenna. The TBS 500 Quadcopter Frame equips anodized alloy spacers.

The frame has the wheelbase of 500mm and weighs around 400gm. It features mounting tab at the rear end on the bottom plate of the main frame for mounting Batteries.

The added lift capacity makes this frame ideal for carrying larger payloads such as camera systems and Gimbal.

The frame comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the main frame is done within few minutes.  Also, it requires one size of bolt for the overall build and thus a unique one size hex wrench which makes hardware mounting very convenient. This feature of TBS Quadcopter Frames makes them so easy to assemble and disassemble.

We are offering two TBS 500 Carbon Fiber Quadcopter Frames which differs in quality of mainframe. One is manufactured with the moderately good quality carbon fiber than other. You can simply recognize them by carefully observing the name of the products. (Read Following Names)

TBS 500 Carbon fiber frame KIT – High Quality
TBS 500 Glass Fiber Frame KIT

We are offering a full line of multi-rotor accessories,
Multirotor Motors
ESC’s (Electronic Speed Controller)
Orange Li-PO Batteries
Flight Controllers
FPV Cameras
Gimbals
Propellers
Remotes

Or explore more variety of multirotor accessories by clicking below
Multirotors

You can also check our following Multirotor Kits category if you are a beginner or just not willing to send lot much of time in selecting appropriate parts for your quadcopter and want your quad in the air as soon as possible,
Multirotor Kits

Note: The dimensions and weight may have  ±2% error.


Features :

  1. Made by advanced engineering material, super strong & smooth
  2. The arm equips support ridges for better and faster forward flight.
  3. Features pre-threaded brass sleeves.
  4. The large mounting tab for camera mounting.

Package Includes : 

2 x TBS 500 Mainframe plates
1 x Power distribution board
6 x Spacers with anodized screws
Set of Screws

 

Recommendation (NOT Included ) :

  1. Propeller: “1045″ OR “8045” Orange Propeller (CW & CCW)
  2. Battery: 3S Orange LiPo (1800 – 3600mAh)
  3. ESC: 15A – 40A.
  4. Motor: 800-1100 KV (brushless dc motor)
Model

TBS 500

Material

Carbon Fiber + Polyamide Nylon

Wheelbase (mm)

500

Weight (gm)

400

Arm Size (mm)

220 x 40 (LxW)

Motor Mounting Hole Dia. (mm)

3

Shipment Weight

0.55 kg

Shipment Dimensions

37 x 17 x 6 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

7 reviews for TBS 500 Glass Fiber Frame ESC Power Distribution Board With Replacement Arm and Shock Absorber

  1. Rated 5 out of 5

    samshadnc 007

    Good product come along with power distribution board and shock absorbing mount

  2. Rated 5 out of 5

    Aasif maski (verified owner)

    good quality glass fiber board and arms its come with power distribution board set up is wherry easy it is good quality product

  3. Rated 5 out of 5

    Aasif maski (verified owner)

    good quality glass fiber board and arms its come with power distribution board set up is wherry easy it is good quality product

    plz include landing gear also

  4. Rated 5 out of 5

    SUJEET KUMAR YADAV

    Nice product & also the frame is strong & light weight.

  5. Rated 5 out of 5

    Prasanna (verified owner)

    Great frame!

  6. Rated 4 out of 5

    Arjun M P (verified owner)

    Good Quality, for my frame screw holes for arms were not aligned, required some adjustments.
    Arms are strong, power distribution board was very much useful.

  7. Rated 4 out of 5

    Abhishek NAGLE (verified owner)

    The frame comes with all the components listed along side. My top and bottom plates hole for arms were not quite perfect but overall it’s a perfect kit…..

Add a review

Your email address will not be published. Required fields are marked *