Teensy 4.0 Development Board

(2 customer reviews)
Availability:

In stock


SKU: 620020
  • ARM Cortex-M7 at 600 MHz
  • 1024K RAM (512K is tightly coupled)
  • 2048K Flash (64K reserved for recovery & EEPROM emulation)
  • 2 USB ports, both 480 MBit/sec

 1,977.00

(Including GST)

In stock

Select below products to add together

50 CM Micro USB Cable ₹ 32

New Price: ₹ 1977


Purchase this product now and earn 20 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Brand: Teensy
Category: Teensy Board
Tags: Arduino, Advanced Development Board, ARM, Development, teensy

The Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with an NXP iMXRT1062 chip, the fastest microcontroller available today – ten times faster than the Teensy 3.2The NXP iMXRT1062 is a ‘cross-over’ processor, which has the functionality of a microcontroller, at the speeds of a microcomputer. It’s perfect for when you need tons of flash, RAM and, to crunch lots of data, or when you need two full-speed USB ports. It even has a graphics processor! All this for two sawbucks.

When running at 600 MHz, Teensy 4.0 consumes approximately 100 mA current.

Teensy 4.0 provides support for dynamic clock scaling. Unlike traditional microcontrollers, where changing the clock speed causes wrong baud rates and other issues, Teensy 4.0 hardware and Teensyduino’s software support for Arduino timing functions are designed to allow dynamically speed changes. Serial baud rates, audio streaming sample rates, and Arduino functions like delay() and millis(), and Teensyduino’s extensions like IntervalTimer and elapsedMillis, continue to work properly while the CPU changes speed.

Teensy 4.0 also provides a power shut off feature. By connecting a pushbutton to the On/Off pin, the 3.3V power supply can be completely disabled by holding the button for 5 seconds and turned back on by a brief button press. If a coin cell is connected to VBAT, Teensy 4.0’s RTC also continues to keep track of date & time while the power is off.

Teensy 4.0 also can also be overclocked, well beyond 600 MHz!


Processor

Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with an NXP iMXRT1062 chip, the fastest microcontroller available today.

Teensy Benchmark Score


Features:

  • 3 CAN Bus (1 with CAN FD)
  • 2 I2S Digital Audio
  • 1 S/PDIF Digital Audio
  • 1 SDIO (4 bit) native SD
  • 3 SPI, all with 16 words FIFO
  • 3 I2C, all with 4 byte FIFO
  • 7 Serial, all with 4 byte FIFO
  • 32 general-purpose DMA channels
  • 31 PWM pins
  • 40 digital pins, all interrupt capable
  • 14 analog pins, 2 ADCs on chip
  • Cryptographic Acceleration
  • Random Number Generator
  • RTC for date/time
  • Programmable FlexIO
  • Pixel Processing Pipeline
  • Peripheral cross triggering
  • Power On/Off management

Useful Links:

Teensy website

Pins Layout


Package Includes:

1 x Teensy 4.0 Development Board

Core:

ARM Cortex-M7

Flash Memory (KB/MB):

2 MB

RAM (KB/MB):

1 MB

Rated Speed (MHz):

600

No. of Analog Inputs

14

Digital I/O Pins

40

Processor

iMXRT1062

Bandwidth (Mbps)

480

Overclockable

yes

EEPROM

2K

Direct Memory Access

32 general-purpose DMA channels

Length (mm):

36

Width (mm):

18

Height (mm):

1.7

Weight (g):

0.01

Shipping Weight 0.02 kg
Shipping Dimensions 5 × 3 × 2 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 2 reviews

5.0 overall
2
0
0
0
0

Add a review

  1. Ajit

    Excellent product, excellent service.

    Ajit

  2. subhojit416 (verified owner)

    If you love microcontrollers you’ll be in nuts to see what it is capable of. But you may require additional shield or extension board as application calls for. It can be overclocked to 1GHz and needs heatsink. It can even run tiny gui game and even there is tensorflow lite for microcontrollers. Nuff said now its your decision.

    subhojit416

C compiler

Add-on for Arduino IDE.

Sample USB examples

Dean Camera LUFA's Library

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…