Thermistor 100k NTC with 1 Meter Cable Temperature Sensor

(1 customer review)
Availability:

In stock


SKU: 11993
  1. Temperature range of use: −40°C to 270°C.
  2. Dissipation power factor: ≥5 mW/℃ (static in the air).
  3. 100k Ohm NTC Thermistor.
  4. NTC Thin Film Thermistor Cable.
  5. Max power rating: 45 mW
  6. The hot time constant: ≤7 s(in the air)

 69.00

(inc GST)

₹ 58.47 (+18% GST extra)

In stock

Purchase this product now and earn 1 Robu Point!
Category: 3D Printer Extruder Parts and Fans
Tags: 3D printer, Thermistor, Temperature Sensor, NTC

This is Thermistor 100k NTC with 1 Meter Cable Temperature Sensor for 3D Printer Reprap. The thermistor is a thermally sensitive resistor known for exhibiting a large change in resistance with only a small change in temperature.

It is important to note that a thermistor’s change in resistance is non-linear. It follows a pre-defined curve which is provided by the thermistor manufacturer.

Positive thermal coefficient (PTC) will increase in resistance with an increase in temperature, negative ones (NTC) will decrease. But the formula in practice is not linear, so sometimes an accurate table of measurements is better than the linear formula. These measurements can usually be found in the datasheet that accompanies the thermistor.


Features :

  1. 100k Ohm NTC Thermistor.
  2. NTC Thin Film Thermistor Cable.
  3. Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
  4. Resistance precision: ± 1%, ± 2%, ± 3%.
  5. B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
  6. B value accuracy: ± 1%.
  7. Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)

Package Includes :

1 x Thermistor 100k NTC with 1 Meter Cable Temperature Sensor

Temperature Measuring Range (°C)

−40 to 270

Accuracy

1%

Length (mm)

3

Width (mm)

1.8 (Body Diameter)

Weight (gm)

5

Cable Length (Meter)

1

Shipment Weight

0.01 kg

Shipment Dimensions

6 × 4 × 2 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 1 review

3.0 overall
0
0
1
0
0

Add a review

  1. Keerthi Kulkarni (verified owner)

    While the Thermistors are good, the wires connected and the connection to the wire are very fragile. They break down very frequently and become unusable after some time. At the other end too, the cables are open and with no connectors. You will have to solder a new wire with connector to use it.

    Keerthi Kulkarni

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions

You may also like…

SHOPPING CART

close