Timing Delay Switch Circuit with Double MOSFET Control

Availability:

In stock


SKU: 699620
  1.  Wide voltage power supply (6~30V)
  2. supports micro USB 5.0V power supply
  3. The interface is clear and simple, powerful, easy to understand
  4. All set parameters automatically save power.

 299.00

(inc GST)

₹ 253.39 (+18% GST extra)

In stock

Prices shown above are Inclusive of GST

Purchase this product now and earn 3 Robu Points!
Brand: Generic
Category: Relay

Buy the Timing Delay Switch Circuit with Double MOSFET Control Board Instead Of Relay Module 12 24V. This product is easy to use and has many applications.


Features:

Module characteristics and uses:

  1. To achieve fast turn-on and off the circuit, an unlimited number of switching;
  2. Conducting and cutting process does not produce noise, no spark, no electromagnetic interference;
  3. Compared with electromagnetic relay products, longer life;
  4. The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature, operating current of up to 15A, power up to 400W, to meet the most use of the equipment;
  5. A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient.

Highlights:

  1. Wide voltage input (5 ~ 36V), most devices can be used, very convenient;
  2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;
  3. The emergency stop function (“STOP” key),  With reverse polarity protection, reverse polarity will not burn the product.
  4. Increase the sleep mode, if this mode is enabled, without any operation within 5 minutes, then automatically turn off the monitor, any key wake-up;
  5. You can set a different OP, CL, LOP parameters, which are independent of each other, and are automatically saved;
  6. After the module is powered down, all parameter settings are not lost.

Operating mode:

P1: trigger signal, the relay is on “OP” time, and then disconnect; in the “OP” time, as follows:

P1.1: Signal Retrigger, invalid

P1.2: The signal is triggered again, the clock is reset

P1.3: Signal trigger again, relay off, stop the clock;

P-2: trigger signal, the relay off “CL” of time, the relay on “OP” time, and then disconnect relay;

P3.1: trigger signal, the relay is turned on after the “OP” time, the relay off “CL” time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( “LOP “) can be set.

P3.2: without triggering signal, the relay is on “OP” time, the relay off “CL” time, and has been cycling; frequency ( “LOP”) cycle can be set;

P-4: signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing “OP” time, the relay is; if another signal during timing, timing is cleared;


Package Includes:

1 x Timing Delay Switch Circuit, Double MOSFET Control Board Instead Of Relay Module 12 24V

Operating Voltage

5 – 36V.

Trigger Source

Active-high (3.0V-24V)

Quiescent Current

20mA

Operating Current

50mA

Maximum Operating Current

30 A

Working temperature

-40 – 85 ºC

Continuous current

15A

Power

400W

Length(mm)

60

Width(mm)

34

Height(mm)

21

Weight(g)

18

Shipment Weight

0.02 kg

Shipment Dimensions

10 × 7 × 3 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Questions and answers of the customers

  1. 0 votes
    There are no answers for this question yet. Answer now
  2. 0 votes
Only registered users are eligible to enter questions