View cart “TP4056 1A Li-ion lithium Battery Charging Module – Mini USB” has been added to your cart.
TP4056 1A LI-ION LITHIUM BATTERY CHARGING MODULE - Micro B USB sku_373990_2 HTB1.vJHNXXXXXXaXpXXq6xXFXXXD 14428491876_8242b429f3 battery charget module lipo-500x500

TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB

6 Review(s)
Availability: In stock
SKU: 34697


  1. Input voltage : 4.5V ~ 5.5V.
  2. Input Interface: Micro USB port.
  3. Charging method: linear charge.
  4. A full charge voltage: 4.2V.
  5. Power: 4.2 w.
  6. Charging accuracy: 1.5%.
  7. Operating Temperature: -10 to +85ºC
  8. Charging indicator: Blue LED charging, Red LED full


(inc GST)

₹ 51.69 (+18% GST extra)

In stock

Purchase this product now and earn 1 Robu Point!

The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB is a 3.7V lithium battery charger module has on-board Micro USB interface. With Micro-USB onboard connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.

Manufactured under fully machinery processing. Each module is tested OK before shipment from so it has high reliability for the best performance. In conclusion, it is special design for a single lithium battery charging.

It uses the internal PMOSFET architecture which eliminates the use of blocking diode. It prevents negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charging current is programmable externally with a single resistor. The TP4056 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.

TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage.


  1. This breakout board does not have Overcurrent protection.
  2. Connect Ampere meter in series with 5V input end.
  3. The charging current is best to be 0.37 times of the battery capacity,
  4. Charging wire can’t be too thin or too long while interfacing.
  5. Make sure the board has good contact with the battery.
  6. Chip at work about 60 degrees fever is normal.
  7. Input reverse connection has no effect on the chip. Rather the output (battery’s) reverse connection will burn out the chip.

We have 3 more such charging boards employing same TP4056 chip which are available at and they are different according to the onboard USB port and current protection they provide,

1. TP4056 1A Lipo Battery Charging Board Micro USB with Current Protection
2. TP4056 1A Li-ion lithium Battery Charging Module – Mini USB
3. TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB

Features :

  1. Charging indicator: RED LED charging, BLUE LED full Charged
  2. Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below.
  3. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  4. Fully machinery automated processing, all patch parts manufacturing.
  5. Charging current can be adjusted by just changing the circuit board’s fixed resistors. It can change the output to the 100mA-1000mA, very conveniently.(refer pdf linked below).

Package Includes :

1 x TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB


Make a 3.7 V Li – ion Battery Charger using TP-4056
Charging accuracy (%)


Charging method


Full Charge Voltage (V)


Height (mm)


Input Voltage (V)


Length (mm)


Operating Temperature (°C)

-10 to 85

Rated Power (W)

4.2 W

Weight (gm)


Width (mm)


Shipment Weight

0.09 kg

Shipment Dimensions

2.6 x 2 x 0.6 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

6 reviews for TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB

  1. Rated 4 out of 5

    Sandeep Kumar (verified owner)

    works well.

  2. Rated 5 out of 5

    mainak (verified owner)

    good product!!!

  3. Rated 5 out of 5

    Hemant Kumar Meena (verified owner)

    Good product.

  4. Rated 5 out of 5

    Samarth arora (verified owner)

    This is my 10th one. Works flawlessly.

  5. Rated 5 out of 5

    sioispl (verified owner)

    works fine

  6. Rated 5 out of 5

    Manan Chevli (verified owner)

    Fast delivery and working well. I haven’t checked the undervoltage cutoff but during charging, the overvoltage cutoff is 4.25V.

Add a review

Your email address will not be published. Required fields are marked *

TP4056 Datasheet

Resistance vs Current change Table

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.