Categories
View cart “3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module” has been added to your cart.
TP4056 1A Li-ion lithium Battery Charging Module with Current Protection - Mini USB (Robu.in)
TP4056 1A Li-ion lithium Battery Charging Module with Current Protection - Mini USB (Robu.in) TP4056 1A Li-ion lithium Battery Charging Module with Current Protection - Mini USB (Robu.in) TP4056 1A Li-ion lithium Battery Charging Module with Current Protection - Mini USB (Robu.in)

TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB

2 Review(s)
Availability: In stock
SKU: 53264

QUICK OVERVIEW

  1. Input interface: Mini USB.
  2. Input interface: Mini USB.
  3. Current: 1A adjustable.
  4. Charge precision: 1.5%.
  5. Input voltage: 4.5V-5.2V.
  6. Full charge voltage: 4.2V.
  7. Battery over-current protection: 3 A
  8. The battery Undervoltage protection: 2.5 V

 90.00

(inc GST)

₹ 76.27 (+18% GST extra)

In stock

Purchase this product now and earn 1 Robu Point!

This TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.

Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

Manufactured under fully machinery processing. Each module is tested OK before shipment from Robu.in so it has high reliability for the best performance. In conclusion, it is special design for a single lithium battery charging. TP4056 Other features include the current monitor, under voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage.

Using the module:
  1. Connect mini USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
  2. Connect cell to charge to B+/B- pads on the right-hand side of the module.
  3. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
  4. Important! Disconnect load when charging
  5. The red LED indicates charging in progress, green LED indicates charging has finished.
  6. Never charge your battery at a rate greater than 1C.
NOTE:

1. Ampere meter can only be connected to a 5v input end of the module.
2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
6. NO Reverse polarity.

We have 3 more such charging boards employing same TP4056 chip which are available at Robu.in and they are different according to the onboard USB port and current protection they provide,

1) TP4056 1A Li-Ion Lithium Battery Charging Module – Micro B USB
2) TP4056 1A Li-ion lithium Battery Charging Module – Mini USB
3) TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection

Features :

  1. Led indicator: red is charging Green is fully charged.
  2. Current Protection: Yes
  3. Inversed polarity: NO.
  4. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  5. Fully machinery automated processing, all patch parts manufacturing.

Package Includes :

1 x TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB

Charging accuracy (%)

1.5

Charging method

Linear

Full Charge Voltage (V)

4.2

Height (mm)

6

Input Voltage (V)

4.5-5.2

Length (mm)

30

Operating Temperature (°C)

-10 to 85

Rated Power (W)

4.2 W

Weight (gm)

1.8

Width (mm)

17

Over-Current Protection (A)

3

Under-Voltage Protection (V)

2.5

Shipment Weight

0.255 kg

Shipment Dimensions

4 x 3 x 2 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

2 reviews for TP4056 1A Li-ion lithium Battery Charging Module with Current Protection – Mini USB

  1. Rated 5 out of 5

    adobeadi511 (verified owner)

    a very good product

  2. Rated 5 out of 5

    ykprakash (verified owner)

    Physically OK. Not tested yet.

Add a review

Your email address will not be published. Required fields are marked *

TP4056 Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions