TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C

Availability:

Out of stock

Approx Restocking Date: 5th April, 2024
SKU: 835842
  1. Input interface: Type C
  2. Current Protection: Yes
  3. Charging mode: Linear charging.
  4. Current: 1A adjustable.
  5. Charge precision: 1.5%.
  6. Input voltage: 4.5V-5.5V.
  7. Full charge voltage: 4.2V.

 21.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Generic
Category: Battery Protection Board

This TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished.

Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

Manufactured under fully machinery processing. Each module is tested OK before shipment from Robu.in so it has high reliability for the best performance. In conclusion, it is a special design for a single lithium battery charging. TP4056 Other features include the current monitor, under-voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage.

Using the module:
  1. Connect Type C cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
  2. Connect cell to charge to B+/B- pads on the right-hand side of the module.
  3. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
  4. Important! Disconnect load when charging
  5. The red LED indicates charging in progress, the green LED indicates charging has finished.
  6. Never charge your battery at a rate greater than 1C.
NOTE:

1. Ampere meter can only be connected to a 5v input end of the module.
2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
6. NO Reverse polarity.


Features :

  1. Led indicator: Red is charging Green is fully charged.
  2. Current Protection: Yes
  3. Inversed polarity: NO.
  4. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  5. Fully machinery automated processing, all patch parts manufacturing.

Package Includes :

1 x TP4056 1A Li-ion Lithium Battery Charging Module With Current Protection – Type C

SKU: 835842 Category:
Full Charge Voltage (V)

4.2

Over-Current Protection (A)

3

Under-Voltage Protection (V)

2.5

Input Voltage (V)

4.5-5.5

Rated Power (W)

4.2

Operating Temperature (°C):

-10 to 85

Length (mm):

25

Weight (g):

20

Height (mm):

6

Shipping Weight 0.022 kg
Shipping Dimensions 3 × 2 × 1 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C

What is Battery Management System? – BMS Building Blocks, Working & Functions

A Battery Management System AKA BMS ensures the safety of the battery pack by continuously monitoring and regulating parameters like temperature & voltage.

Questions and answers of the customers

  1. 0 votes
    Q It says Current: 1A adjustable. How to make it 500ma? answer now
    Asked by ruchirguitar on January 19, 2024 12:13 am
    A

    To adjust the charging current of the TP4056 mo... Read more

  2. 0 votes
    A

    For your query please rise your ticket on https... Read more

  3. 0 votes
    Q is this compatible with 18650 ? answer now
    Asked by krunalb93 on January 26, 2022 2:56 pm
    A

    Hello,

    Yes, it is compatible with 18650 ... Read more

  4. 0 votes
    There are no answers for this question yet. Answer now
  5. 0 votes
    Q Can i charge more than one battery in parallel with this charger? answer now
    Asked by avay.kumar0129 on January 11, 2021 2:16 pm
    A add two of these modules in parallel
    A Yes, I did. Works like a charm.
  6. 0 votes
    Q is the output volt 5v?? answer now
    Asked by ht182215 on December 10, 2020 10:28 pm
    Answered by the admin

    No

Only registered users are eligible to enter questions
Country Of Origin: China