TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module

(24 customer reviews)

In stock

SKU: 51968
  1. Operating voltage (v):DC 8 – 24V
  2. Chipset:TPA3118
  3. Power output:60W
  4. Material:FR4

 287.00  319.00

(inc GST)

₹ 243.22 (+18% GST extra)

  You save(10%): ₹ 32.00

In stock

Select below products to add together

10K Ohm 3Pin 15mm Shaft Potentiometer (Pack of 3) ₹ 79
DC-005 5.5x2.1mm Female DC Power Jack Supply Socket -5Pcs. ₹ 49
KA7805 Linear Voltage Regulator (Pack of 3 Ics) ₹ 59

New Price: ₹ 287

Purchase this product now and earn 3 Robu Points!
Brand: Generic
Category: Audio Module/ Amplifier
Tags: Amplifier, TPA3118, Digital Amplifier

If you want to make a device where you can control the volume of any sound system then this board is essential for you. In this module, you will get a specification of 60 w and this board can operate in both 12 v or 24 v.

This power amplifier board is gaining so much popularity because of  good sound quality and you can make simple but best projects and Students are like these types of the board because of its effective cost. It has high output and low power consumption.


Pin Diagram:




  1. Sound quality is very good by using this module.
  2. Mono digital audio power amplifier chip.
  3. High output and low power consumption.

Package Includes :

1 x TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module.

Operating voltage (v)

DC 8 – 24V



Power output




Length (mm)


Width (mm)


Height (mm)


Weight (gm)


Shipment Weight

0.016 kg

Shipment Dimensions

13 × 11 × 6 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 24 reviews

4.7 overall

Add a review

  1. christyroys007 (verified owner)

    Bought 2 of these boards, and they work fine. I use these to drive my 2 Pioneer 6×9 speakers.

    A small issue that I face is that when the board power-up and power down, there’s a speaker pop. I added the anti-pop mod from 360customs and the start-up pop is gone, but the power down pop is still there.

    The chip doesn’t have a heat sink and it slightly heats up even at low volumes.

    The caps on the board are 25V, better to upgrade to 35V or 50 V if you plan to use it with a 24V source.

    The delivery was fine, got it in 2 days.


  2. Malay Mukherjee (verified owner)

    excellent with suitable pre amp and tone control at 12v.

    Malay Mukherjee

  3. Santu chutia


    Santu chutia

  4. karansharmaktr0 (verified owner)

    I am using 4 inch 4oms 30 watt woofer in 19 volt good bass an clearty the amp board is small but the sound is awesome 😃😃😃


  5. Shubham Paliwal (verified owner)

    Really Awesome sound quality & i am using 50W 4/8 ohm Subwoofer with Bluetooth module.

    Shubham Paliwal

  6. satish.isro (verified owner)

    Quick delivery even in these trying times. The board works as specified. Full power output is reached with no distortion in audio output. Audio is clear. No noise, One caution: Solder any pins at lower temperature or solder quickly to avoid damage to pads.


  7. Jimmy (verified owner)

    I m using it for sub woofer. value for money


  8. Rudra Ghosh (verified owner)

    Good Frequency response.

    Rudra Ghosh

  9. Ebrahim Shaikh (verified owner)

    Bast amplifier good delivery

    Ebrahim Shaikh

  10. cascam330 (verified owner)

    With some tweaks it puts up very good sound.


  11. sashi (verified owner)

    For the price it works well without any mods. Did not expect such big sound from such a small module and the chips do not warm even on moderate volume levels. Keep up the good work Robu and offer such products at such good prices.


  12. Prasenjit Mallick (verified owner)

    Very good delivery time.
    Product also good.

    Prasenjit Mallick

  13. jimmyg3k (verified owner)

    Value for money. I m running this amp powered by a disposed 12v car battery with 8ohms 8″ Boston speaker


  14. skbhel111 (verified owner)

    Very clear saund


  15. Rahul Purkayastha (verified owner)

    The sound quality is very good

    Rahul Purkayastha

  16. arpan0823 (verified owner)

    The sound quality is pretty good. The loudness depends on the power supply though.


  17. pandia rahman (verified owner)

    excellent class d amplifier board. voice crystal clear. working well with LM324 bass treble board. happy to use this

    pandia rahman

  18. virender_k (verified owner)

    good crystal clear sound


  19. Pandia Rajan (verified owner)

    Excellent product. Working well. Audio output quality super. Voice crystal clear and with working LM324 bass treble board. DC supply 18V. Happy to use this class d amplifier.

    Pandia Rajan

  20. Pandia Rahman (verified owner)

    excellent amplifier board. audio quality very good and crystal clear. very happy. working with LM324 bass treble board. excellent class d amplifier.

    Pandia Rahman

  21. Rahul Purkayastha (verified owner)

    Good sound quality ,👍

    Rahul Purkayastha

  22. Uday Deshwal (verified owner)

    This Small embedded chip is very Effective. I am very much satisfied and thanks for Robou.in for next day delivery.

    Uday Deshwal

  23. Sandeep Kumar (verified owner)

    good sound quality. only that the inductors get hot.

    Sandeep Kumar

  24. rupandey642 (verified owner)

    Breath leaning sound, product quality is fine.


Questions and answers of the customers

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…