TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer

(2 customer reviews)
Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 43742
  1. USB Connector type: USB-Mini
  2. Chip Used: FT232RL
  3. Output Voltage 5v and 3.3v Indicator LEDs USB Connector
  4. Automatic detection of data transfer speeds up to 1Mbps
  5. Data exchange capability with an external interface with UART protocol
  6. Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0

 191.00

(Including GST)

Out of stock

Didn’t Find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: Generic
Category: USB Interface Module
Tags: Programmer, TTL, FT232RL, FTDI

By using the TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer, you can easily install your project or product into a USB interface. The cs2102 is an SI labs product that can communicate (for example, the Arduino multiview 2.5 is the same as the GPS in the APM pack and any other.

A device that has a TTL port provides the computer with a USB port. By connecting this converter to the computer and installing the driver program, which adds a virtual serial port to the computer ports, which is capable of working with Windows operating systems, MAC, Linux. On the output of this converter, in addition to the TXD, RXD and GND pins, the output voltage is also 5v and 3.3v.

A USB/TTL converter based on FT232RL high quality, high-performance USB-to-Serial Bridge Controller.  The famous manufacturer of USB/TTL converter products produced this chip. The FTDI TTL USB is the latest device to be added to FTDI’s range of USB UART interface Integrated Circuit Devices.

This TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer board decrease the cost of Arduino development and increases ease of use. The jumper on the back of the board allows the board’s power output and IO level to be configured to either 3.3V or 5V. You can cut the default 5V trace and add a solder jumper to switch to 3.3V.


Applications of TTL FTDI Transmitter USB For 3.3V 5V dual power FT232RLFTDI MWC Programmer
  1. Programming of Arduino Pro Mini with Automatic RESET through DTR pin
  2. Programming of Microcontrollers that can be programmed using serial bootloaders at 3.3V or 5.0V logic levels
  3. Burn write STC MCU, NXP MCU, Renesas MCU, NEC MCU
  4. Data exchange between microcontroller and Desktop or Laptop Computers
  5. Connection with GPS Devices
  6. Connection with various external Phones, or modems, GSM Modules
  7. All other applications requiring USB/Serial/TTL interface.
  8. Router, HDD, ADSL, broadband modem firmware upgrade
  9. Cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash and so on
  10. Simple UART communication commonly used UART debugging tools in supper terminal
  11. USB signal transferred to TTL signal may be used by electronic enthusiasts
  12. Two data transmission indicator can monitor data transfer status in real-time
  13. 3.3V and 5V power supply interface, easy for the DDWRT of different voltage system that needs power.

Features :

  1. Automatic detection of data transfer speeds up to 1Mbps
  2. Data exchange capability with an external interface with UART protocol
  3. Output Voltage 5v and 3.3v Indicator LEDs USB Connector
  4. With RX and TX Indicator LEDs
  5. Manage System for Reducing Flow In Idle and Standby Mode
  6. Support for serial output devices such as modems, card reader devices, digital cameras and more.
  7. Interface: Mini USB
  8. +3.3V and +5.0V signal Level Support using SMD jumper.
  9. Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
  10. DTR and CTS pins. DTR pin can be used for Automatic Reset of Arduino Pro Mini boards while coding downloads

Package Includes :

1 x TTL FTDI Transmitter USB For 3.3V 5V dual power module.

SKU: 43742 Category: Tags: , , ,
IC Chip

FT232RL

Connector Type

Mini USB

Length (mm):

25

Width (mm):

16

Height (mm):

6

Weight (g):

4

Shipping Weight 0.005 kg
Shipping Dimensions 4 × 3 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 2 reviews

5.0 overall
2
0
0
0
0

Add a review

  1. Vijayasimha Ajarananda

    Good, only watch out for the 5v/3.3v jumper. You need to cut the track for 3.3v.

    Vijayasimha Ajarananda

  2. SUJEET KUMAR YADAV

    This is must for RC HOBBY.

    SUJEET KUMAR YADAV

Datasheet of FT232RL

Pin Diagram of FT232RL

Drivers

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China

You may also like…