USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool

(23 customer reviews)
Availability:

In stock


SKU: 28392
  1. Logical light indication: a small light indicate CHO electrical level.
  2. Input feature: 5PF,100K Ohm.
  3. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
  4. 8-Channels USB logic analyzer with a 24Mhz sampling frequency
  5. Can analyze UART, IIC, and SPI, etc automatically
  6. Great for MCU, ARM system and FPGA development
  7. Voltage: 0-5.5V

 469.00

(Including GST)

In stock

Select below products to add together

8CH Quality Test Hook Clip Logic Analyzer Test Folder for USB Saleae 24M ₹ 189

New Price: ₹ 469


Purchase this product now and earn 5 Robu Points!


Have any issues, Get support here.
Have a bulk requirement, mail us to [email protected]
Didn’t Find what you are looking for?

Category: USB Interface Module

USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP debug tool is a very cheapest and most useful debugging tool for digital signal analysis, help you fully analyze the UART, IIC, SPI, CAN all of these interfaces.

If you don’t want to start with an expensive oscilloscope, this will be another good choice. With a total of eight digital channels, the voltage range is 0V ~ 5.5V, the voltage threshold is considered to be low below 1.5V, and 1.5V above is considered high. 24 m sampling rate, can automatically analyze UART, IIC, SPI, and many other standard protocols.

If you do single-chip development, ARM system development or FPGA development then we strongly recommend you buy this product. To do a good job, must first sharpen his device MCU-related products, as long as you do this tool will be your crescent moon nod. Especially do UART, SPI, and IIC communication debugging, which absolutely let you get twice the result with half the effort.

Note: The color and type of USB Logic Analyze may vary as per the availability of the actual product.


Connections Diagrams with Arduino:1 3

UART Connections

2 1

I2C connection

3 2

SPI connection


Specifications and Features:

  1. Logical light indication: a small light indicate CHO electrical level.
  2. Input feature: 5PF,100K Ohm.
  3. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits
  4. 8-Channels USB logic analyzer with a 24Mhz sampling frequency
  5. Can analyze UART, IIC, and SPI, etc automatically
  6. Great for MCU, ARM system and FPGA development
  7. Voltage: 0-5.5V
  8. Threshold Voltage: 1.5V
  9. The sampling rate can be set as below:
    24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz;
  10. Data upload real-time, the max of the depth of the collection is 10T, far from the practical need.

Package Includes:

1 x USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP debug tool
1 x USB Connecting Cable
1 x 10-Point Multicolor Dupont cable

SKU: 28392 Category:
Input Supply Voltage (VDC)

0 ~ 5.5

Threshold Voltage (V)

1.5

Sampling Rate

Adjustable

Dupont Cable Length (cm)

20

USB Cable Length (cm)

50

Length (mm):

54

Width (mm):

27

Height (mm):

15

Weight (g):

55

Shipping Weight 0.059 kg
Shipping Dimensions 10 × 5 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 23 reviews

4.9 overall
20
3
0
0
0

Add a review

  1. Yogesh Dixit (verified owner)

    Great, very useful…

    Yogesh Dixit

  2. dabhivishalrambhai (verified owner)

    Product quality is very good 👍

    dabhivishalrambhai

  3. khatri.jatin (verified owner)

    does the job… thats it

    khatri.jatin

  4. preetamsad (verified owner)

    Good product for its price. Its a clone of an old saleae logic analyzer which has been discontinued. Ofc its not so much reliable as the original one (does not gets recognized sometimes) but good enough for its price.

    Can be used with the open source signal analysis software Sigrok and its frontend Pulseview.

    https://sigrok.org/wiki/Downloads

    preetamsad

  5. sksahu896 (verified owner)

    Nice product.

    sksahu896

  6. Somnath (verified owner)

    Great tool for hobbyist like me who ain’t got budget for a full spec logic analyzer. Everything is fine but at times it keeps disconnecting itself from the computer or at times it doesn’t get recognised by the PC as a USB device. Not sure whether it’s my PC port that’s crooked or it’s the USB cable supplied with it or the device itself has got something wrong with it. Either way, it’s the cheapest spectacle available to me to clearly see the logical mayhem going on in the systems I design and I’d safely suggest others with a pinched up budget like me to go for it.

    Somnath

  7. gtmanuj04 (verified owner)

    Very accurate, good and handy product

    gtmanuj04

  8. Sagar (verified owner)

    In this price nice product

    Sagar

  9. Aditya kumar Rai (verified owner)

    Nice Product good working. Best use in Embedded Electronics. Timely Delivered. Easy to use

    Aditya kumar Rai

  10. Aditya kumar Rai (verified owner)

    Nice Product good working. Best use in Embedded Electronics. Timely Delivered.

    Aditya kumar Rai

  11. razakchokli (verified owner)

    Very good thanks

    razakchokli

  12. nirmalknock (verified owner)

    Good product. Everything works fine, but after some time the module gets warm, but not too much,..

    nirmalknock

  13. mathivanan7589 (verified owner)

    Excellent and Value for Money

    mathivanan7589

  14. Shubhankar Chaudhury (verified owner)

    Using it for more than a year now. Still works like a charm.
    Use Saleae Logic software (I am using 1.2.18 currently) for plug and play usage.
    Must have product!

    Shubhankar Chaudhury

  15. Bhupendra kumar gupta

    Good Product, working well with all the channels.

    Bhupendra kumar gupta

  16. Bhupendra Kumar Gupta (verified owner)

    Good Product, working well with all the channels.

    Bhupendra Kumar Gupta

  17. debrajdeb123 (verified owner)

    Use Logic 1.2.18 from Saleae and it works great.

    debrajdeb123

  18. rajputh54 (verified owner)

    Awesome

    rajputh54

  19. Barathan K (verified owner)

    Good for realtime debugging… Value for money…

    I difficult to find the software…. Please add software link in the Product discrimination….

    https://www.saleae.com/downloads/

    I use the above software… Works well …

    Barathan K

  20. sramakrishnas (verified owner)

    Nice Product, works fine and good price and super fast delivery.

    sramakrishnas

  21. Balajee Seshadri (verified owner)

    Excellent product. Received on time and worked fine. Every electronic engineer’s must have product.

    Balajee Seshadri

  22. Dhanabal

    Working fine. Reasonable price.

    Dhanabal

  23. Uday paranjape (verified owner)

    Good product same as described
    Very fast delivery.

    Uday paranjape

Simulator Software

Questions and answers of the customers

  1. 0 votes
    Q Can this be used for RS485 RTU bebugging answer now
    Asked by venkat.guru on October 31, 2023 11:24 am
    A

    Yes, this be used for RS485 RTU bebugging

  2. 0 votes
    A check the attachments tab
  3. 1 vote
    A

    Hello, for your query you can mail us on https:... Read more

  4. 1 vote
    There are no answers for this question yet. Answer now
  5. 1 vote
    A

    No, All you have to do is connect the channel p... Read more

  6. 0 votes
    Q how is the performance of this analyzer?
    Asked by bhupendra1122 on February 28, 2020 9:47 pm
    There are no answers for this question yet. Answer now
Only registered users are eligible to enter questions
Country Of Origin: China