Waveshare SX1262 LoRa HAT for Raspberry Pi 868MHz Frequency Band


In stock

SKU: 968493
  1. SX1262 LoRa module
  2. 74HC125V: voltage level translator
  3. CP2102: USB TO UART converter
  4. Working bands: 850.125 ~ 930.125MHz
  5. Receive Sensitivity: [email protected] (On-air)
  6. Interface: UART
  7. Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)


(Including GST)

In stock

Select below products to add together

20 CM 40 Pin Dupont Cable Male/Male, Male/Female, Female/Female Cable Combo ₹ 103.55

New Price: ₹ 2224

Purchase this product now and earn 23 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
6 Months Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Category: Raspberry Pi Hats
Tags: Waveshare, 868MHz Frequency Band, SX1262 LoRa HAT

This is a Raspberry Pi LoRa HAT based on SX1262, which covers the 868MHz frequency band. It allows data transmission up to 5km through the serial port.

By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.

Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves a longer communication distance, higher rate, lower consumption, better safety, and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.

What’s on Board:

Waveshare Sx1262 Lora Hat For Raspberry Pi, 868Mhz Frequency Band, For Europe, Asia, Africa

  1. SX1262 LoRa module
  2. 74HC125V: voltage level translator
  3. CP2102: USB TO UART converter
  4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi
  5. USB TO UART port
  6. UART header: for connecting host boards like STM32/Arduino
  7. SMA antenna connector
  8. IPEX antenna connector
  9. Indicators:
    • RXD/TXD: UART RX/TX indicator
    • AUX: auxiliary indicator
    • PWR: power indicator
  10. UART selection jumpers
    • A: control the LoRa module through USB TO UART
    • B: control the LoRa module through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART
  11. LoRa mode selection jumpers


  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  2. Onboard CP2102 USB TO UART converter, for serial debugging
  3. Brings the UART control interface, for connecting host boards like Arduino/STM32
  4. 4x LED indicators, easy to check the module status
  5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
  6. Auto multi-level repeating, suit for ultra-long-range communication, allows multi-network on the same region
  7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
  8. Customizable communication key which won’t be retrieved greatly improves the security of user data
  9. LBT support, monitoring the signal channel noise before transmitting, greatly improves the success ratio under an extreme environment
  10. RSSI signal intensity indicating support, for evaluating signal quality, tuning the network
  11. Wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
  12. Supports fixed-point transmission, broadcast, signal channel monitor

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Package Includes:

1 x SX1262 868M LoRa HAT

1 x USB type A plug to micro plug cable

1 x 868MHz antenna

Receive Current


Sleep Current

2uA (LoRa module deep sleep)

Max. Transmit Power

22.0dBm(10, 13, 17, 22dBm Selectable)

Transmit Length

240 Bytes (32, 64, 128, 240 Bytes Selectable)


1000 Bytes

Working bands

850.125 ~ 930.125MHz

Receive Sensitivity

[email protected] (On-air)




5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)

Maximum Working Voltage (V)


Logic Input (V)


Operating Temperature (°C)

40 to 85

Length (mm):


Width (mm):


Height (mm):


Weight (g):


Shipping Weight 0.075 kg
Shipping Dimensions 7 × 4 × 3 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Replacement will be done against manufacturing defects.

What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall

Be the first to review “Waveshare SX1262 LoRa HAT for Raspberry Pi 868MHz Frequency Band”

There are no reviews yet.



Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China