Wind Speed Sensor Current Type(4 to 20mA) Anemometer Kit (Waterproof & Industrial)

Availability:

In stock


SKU: 949449
  1. High hardness, Corrosion protection.
  2. Waterproofness and High precision.
  3. The mode of its output signal:4 to 20mA (Current Output)
  4. supply voltage: DC 12-24V.
  5. Power consumption:Voltage MAX≤0.3W.
  6. Start wind speed:0.4-0.8m/s.

 4,799.00

(inc GST)

₹ 4066.95 (+18% GST extra)

In stock

Select below products to add together

Uno R3 compatible with Arduino + Cable + Transparent acrylic case for Uno R3 ₹ 869
Original Arduino Uno Rev3 ₹ 1699

New Price: ₹ 4799


Purchase this product now and earn 48 Robu Points!
Brand: Generic
Category: Environmental Sensors

The three Cups type Wind Speed Sensor Current Type(4 to 20mA) AnemometerKit is an instrument that can measure the wind speed. It is composed of a shell, the wind cup, and the circuit module. Photovoltaic modules, industrial microcomputer processor, the current generator, electric current and so on are integrated into the internal drive.

The materials of sensor shell and back colour coted wind Cups are of aluminium alloy which uses the special mold precision casting technology, the size of the tolerance is very small. The precision of the surface is very high, and the internal circuit has been protection processing, the sensor has high strength, weather resistance, corrosion resistance and waterproof.

The plug of the cable is a military plug, it has a good anticorrosive and prevents erosion performance that it can ensure the instrument used for a long time, at the same time, In the case of using relevant specifications that ensure the accuracy of the wind speed acquisition.

The material of the circuit PCB is the military-grade A which ensure the stability of the parameters and the quality of the electrical properties; Electronic components are all industrial chip which makes overall has extremely reliable electromagnetic interference resistance and can ensure that the host can work normally in – 20 ℃ ~ + 50 ℃, humidity 35% ~ 85% (condensation).

This product can be widely used in engineering machinery (crane, crawler crane, door crane, tower crane, etc.), railways, ports, docks, power plants, meteorological, cableway, the environment, greenhouse, breeding, air conditioning, energy monitoring, agriculture, health, clean room areas such as wind speed measurement, and the corresponding signal output.

Robu.in brings you the anemometer sensors, its wind speed was judged by adopting the output in varying current in the range of 4mA to 20mA, users can easily read the level of wind speed by our instruction and sample code.

Please make the external power (DC 12-24V) and the wiring to Arduino on the same ground, i.e. connect GND to Arduino as well as to external power’s GND. In the diagram, it was not indicated out.

Connection

  1. Red+12-24V
  2. BlackGND
  3. YellowVoltage signal
  4. BlueCurrent signal

Pin Description

400px-SEN0170_interface


Connection Diagram:

Please make the external power (DC 9-24V) and the wiring to Arduino in the same ground, i.e. connect GND to Arduino as well as to external power’s GND. In the diagram, it was not indicated out.


Sample Code:

/*
Connect the voltage signal wire to Arduino analog interface:
Yellow Cable<---->A0
*/

 void setup()
 {
   Serial.begin(9600);
 }

 void loop()
 {
   int sensorValue = analogRead(A0);
   float outvoltage = sensorValue * (5.0 / 1023.0);
   Serial.print("outvoltage = ");
   Serial.print(outvoltage);
   Serial.println("V");
   int Level = 6*outvoltage;//The level of wind speed is proportional to the output voltage.
   Serial.print("wind speed is ");
   Serial.print(Level);
   Serial.println(" level now");
   Serial.println();
   delay(500);
 }

Features :

  1. High hardness
  2. Corrosion protection
  3. Waterproofness
  4. High precision
  5. Dimensions:
    • Cups Outer Diameter: 50 mm.
    • Body Outer Diameter: 39 mm.
    • Base Diameter: 60 mm.
    • Screw Hole Diameter: 7 mm.

Package Includes :

1 x Wind Speed Sensor Voltage Type(0-5V) Anemometer.

1 x 5-Meter Connecting Cable with Crimped Connector.

1x Mounting Accessories set.

 

Note: This Anemometer produces the current output in the range of 4 to 20mA

 We have another varient that produces voltage Output in the range of 0 to 5 V DC acc0rding to the speed of the wind. Click Here to see. 

Rated Supply voltage (VDC)

12 – 24

Power consumption

Voltage MAX ≤ 0.3W

Output signal range (mA)

4 to 20

Resolution (m/s)

0.1

Effective measurement range

0-30m/s

System error

±3%

Transmission distance (m)

< 1000

Max Wind Speed

70m/s

Working temperature (℃)

-40 ~ +80

Length (mm)

180

Height (mm)

120

Weight (gm)

255

Shipment Weight

0.8 kg

Shipment Dimensions

24 × 22 × 20 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Wind Speed Sensor Current Type(4 to 20mA) Anemometer Kit (Waterproof & Industrial)”

There are no reviews yet.

Datasheet

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions