YFS301 5-18V Water Flow Sensor Flowmeter 0.3-10L/Min
YFS301 hall effect water flow sensor is a light, nimble outline, small size, and easy to install. All materials are in line with SGS testing standards. There is an integrated hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay safe and dry. Stable, high temperature, low water pressure start. Three wires connection: Red for positive, black for negative, yellow for pulse signal.
Water heater, washing machine, boiler, electromagnetic water heater, water dispenser, water purifier, R.O. machine, U.F. machine, coffee machine, water machine, water machine control, water control machine, beer machine, beauty equipment, shower equipment, electrolytic water machine, energy engineering, heat pump, IC meter, steam equipment, irrigation equipment, water system, campus card self-service sale (sell) water machine, washing machine, automatic washing equipment, water treatment equipment, water dispensing equipment, cooling system, circulation system, intelligent toilet (toilet), bidet, mechanical equipment, heating equipment, Pharmaceutical (agents) equipment, etc.
- When magnetic material is close to the sensor, its characteristics may vary.
- In order to avoid particle debris, the sensor must be installed after a filter.
- The flow sensor can be installed in any direction. IT has to avoid a strong vibrating and shaking environment, so as not to affect the accuracy.
- POM body and turbine, SUS304 stainless steel shaft(axle).
- Inlet and outlet connection, easy operation; quick connector for 3/8″ PE pipe;
- Imported Hall IC from the U.S., stable and reliable;
- Flow Range: 0.3-10L/min;
- Working voltage: DC1.8-5V(low consumption version)，5-18V(regular version), 5-24V(PLC version)
- Rated voltage: 5 to 18 V
- Input/Output Diameter: 9.5mm
- Pulse output duty cycle: 50+-10%
- Insulation resistance: 100M Ohm and above
- Tightness: Seal up all the holes, and inflate with 0.8MPa water, after 1 minute, no leakage and deformation;
- Operating Temperature: -20-to-60ºC
- Max Pressure: 0.8Mpa
- Electrical Strength: AC500V 50Hz.
- Wire length: regular 15cm, another length can be tailor-made against request.
- Wire end connection: SM2.54 Plug/XH2.54 plug
1 x YFS301 5-18V Water Flow Sensor Flowmeter 0.3-10L/Min