-
(Step-Up) Boost Converter
XL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board (Made In India)
(Step-Up) Boost ConverterXL6009 DC-DC Step-Up Converter Performance Ultra LM2577 Booster Circuit Board (Made In India)
SKU: 12282- The performance is much higher than LM2577.
- Non-isolated Boost converter.
- It has a non-synchronous rectifier.
- Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range;
- Low ultra wide output voltage 5 v ~ 35 v;
SKU: 12282 -
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
SKU: 44497- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 44497 -
Boards Compatible with Arduino
UNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
-37%Boards Compatible with ArduinoUNO R3 CH340G ATMega328P compatible with arduino + Cable + Transparent Acrylic Case For Uno R3
SKU: 48065- A basic Arduino Kit including everything to get started.
- It includes a quality proven Arduino Cable.
- It includes a strong and sturdy Transparent Acrylic Case.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 48065 -
Battery Protection Board
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
SKU: 44232- Dimension: 25 x 19 x 10 (LxWxH)mm.
- Input interface: micro USB.
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: 44232 -
-
-
LiDAR Sensor
TFMini-S Micro LiDAR Distance Sensor for Drones UAV UAS Robots (12m)
SKU: 715935- Operating Range is 0.1 ~ 12m
- Supply Voltage – 5V
- Frame Rate is 10 – 1000Hz
- Operating Temperature is 0℃~60℃
- Communication Interface – UART
- Accuracy – ±[email protected](0.1-6m), ±1%@(6m-12m)
- FOV – 2°
SKU: 715935 -
-
LiDAR Sensor
TF02-Pro LIDAR Distance Ranging Sensor FOR DRONES UAV UAS Robots (40M) IP65 LiDAR
SKU: 715933- The range up to 40 meters
- High frame rate(up to 1000Hz Adjustable)
- Low power consumption
- Higher Accuracy and frequency.
- Richer Interface – UART/I2C/IO
- Light Weight: 50gm
- FOV: 3°(3 degrees)
SKU: 715933 -
Teensy Board
Teensy LC USB Micro-controller Development Board
SKU: 74225- 32 bit ARM Cortex-M0+ 48 MHz CPU
- 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
- 13 High-Resolution Analog Inputs
- 27 Digital I/O Pins (NOT 5V Tolerant)
- 10 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- 3 UARTs (serial ports)
- SPI, I2C, I2S
- I2S (for the high-quality audio interface)
SKU: 74225 -
-
-
Sensor Kits
SeeedStudio Grove Inventor Kit for micro:bit
SKU: 602848- Cool extension shield with rich and convenient peripherals
- 8 well selected Grove modules for working with micro:bit
- 12 awesome projects to let you get started quickly
- Well documented instruction set
- 4 Grove ports on Shield to cover different interfaces
- Edge connectors for crocodile clip and 4mm banana plugs
- On-board USB port to power up your micro:bit
SKU: 602848 -
Sensor Kits
SeeedStudio Grove Creator Kit – Alpha (20 in 1 Sensor Kit)
SKU: 605383- Carefully selected Grove sensors (input) and actuators (output)
- 20 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Comes with 107 colored pages printed book
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite
SKU: 605383 -
-
Interfacing Cables
SeeedStudio Grove 4 pin Male Jumper to Grove 4 pin Conversion Cable 20cm(Pack of 5)
Interfacing CablesSeeedStudio Grove 4 pin Male Jumper to Grove 4 pin Conversion Cable 20cm(Pack of 5)
SKU: 601595- Length of wire = 20cm.
- Multi-colored (red, black, yellow, and white) cable
- The Grove side uses the buckled connector.
- Compatible with all modules included in the Grove system.
SKU: 601595 -
Interfacing Cables
SeeedStudio Grove 4 pin Female Jumper to Grove 4 pin Conversion Cable(Pack of 5)
SKU: 601624- Length of each wire is 20cm.
- Multi-colored (red, black, yellow, and white) cable
- 2.54mm pitch pin header compatible female jumper
- Grove side uses the buckled connector (JST style 2.0mm pitch).
- Compatible with all modules included in the Grove system
SKU: 601624 -
RFID card, Tags & Reader
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
SKU: 9141- Voltage: DC 3.3V (Do not use 5V supply)
- Operating Current :13-26mA
- Idle Current :10-13mA
- Operating Frequency: 13.56MHz
- Highly integrated analog circuitry to demodulate and decode responses
- Supports ISO/IEC 14443 A/MIFARE
- Typical operating distance in reading/Write mode up to 50 mm
SKU: 9141 -
Teensy Board
PJRC Prop Shield with Motion Sensor for Teensy 3.2 and Teensy-LC Development Board
SKU: 193862- Motion Sensors – Allow motion interactive light and sound
- Audio Amplifier – Clear quality audio output to a small speaker
- Fast LED Driver – Drive APA102 / Dotstar LEDs for colourful lighting with rapid response
- Flash Memory – 8MB storage for images, sound clips and data logging
SKU: 193862 -
Smart Vision camera
Pixy 2.1 Smart Vision Sensor-Object Tracking Camera
SKU: 67587- Processor: NXP LPC4330, 204 MHz, dual core
- Image sensor: Aptina MT9M114, 1296×976 resolution with integrated image flow processor
- Lens field-of-view: 80 degrees horizontal, 40 degrees vertical
- Power consumption: 140 mA typical
- Power input: USB input (5V) or unregulated input (6V to 10V)
- RAM: 264K bytes
- Flash: 2M bytes
SKU: 67587 -
-
-
-
Soldering Tools
Noel 25W 230V Sodering Iron Model-GOLD
SKU: 170854- Brand: Noel
- Low current leakage
- Light Weight and Offers good grip
- General purpose for all electronic applications.
- Advanced Heating element
- High-Quality Nickel-Copper plated Bit
- Quickly attains the working temperature
- Constant Tip temperature
SKU: 170854 -
-
-
HMI LCD Display
Nextion Enhanced NX4024K032 3.2” HMI Touch Display
SKU: 170836The Nextion Enhanced versions are more powerful than the standard ones. Compare to the basic Nextion displays, the enhanced ones have added some new functions, such as: supporting built-in RTC, supporting save data to Flash, supporting GPIO, larger flash capacity and larger CPU clock.
SKU: 170836 -
Electronics Modules and Displays on Sale, HMI LCD Display
Nextion Enhanced NX3224K024 2.4” HMI Touch Display
-12%Electronics Modules and Displays on Sale, HMI LCD DisplayNextion Enhanced NX3224K024 2.4” HMI Touch Display
SKU: 649546- Supports built-in RTC
- Supports GPIO
- SD Card interface: support max 32G Micro TF/SD card (FAT32 file format)
- Color: 65K (65536) colors
- Resolution: 320×240 pixel
- Adjustable Brightness: 0~180 nit – the interval of adjustment is 1%
SKU: 649546 -
HMI LCD Display
Nextion BASIC NX8048T070 7.0″ HMI TFT LCD Touch Display
SKU: 84256- Model No: NX8048T070
- Operating Voltage (VDC):4.75 ~ 7
- Max. Operating Current (mA):510
- Display Type:011R(R: Resistive Touchscreen)
- Touch Type: Resistive
- Colors:65K (65536)
- Working Temperature Range (°C):-20 to 70
- Working Humidity Range:10% to 90% RH
SKU: 84256 -
HMI LCD Display
Nextion BASIC NX4024T032 3.2″ HMI TFT LCD Touch Display Module
SKU: 84005Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
SKU: 84005 -
Boards Compatible with Arduino
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
Boards Compatible with ArduinoNano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
SKU: 16906- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 16906 -
Boards Compatible with Arduino
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
-48%Boards Compatible with ArduinoNano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
SKU: 7146- Operating Voltage (logic level): 5V
- With USB cable and Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 7146 -
-
Breadboard and Zero PCBs
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
SKU: 24438- Mb102 Bread Board
- 830 Solder-less Points
- Ideal for Experimenting With Circuit Design In Labs
- Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components
- Colored coordinates for easy components placement.
- Accept a variety of wire sizes 20-29 AWG
SKU: 24438 -
-
-
-
DuPont / Jumper Cable
Male to Male Jumper Wires 40Pcs 20cm
SKU: 7447- 40P color DuPont line
- Length: 200mm
- Weight: 30 gm
- Compatible with 2.54mm spacing pin headers
- 40pcs chromatic male to male color jump wire
- High quality and in good working condition
- Durable and reusable
- Easy to install and use
SKU: 7447 -
-
(Step-Down) Buck Converter
LM2596S DC-DC Buck Converter Power Supply
SKU: 11548- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
SKU: 11548 -
Development Board/Kit
LinkIt Connect 7681 – Wi-Fi HDK for IoT
SKU: 336555- Chipset Core: MT7681 ANDES N9
- Clock Speed: 80MHz
- Flash: 1MB, RAM: 64KB
- Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
- Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
- GPIO Voltage: 3.3V
- PWM Output pin Count: 5
- PWM levels: 0~20
- UART Voltage: 3.3V
- Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mod
SKU: 336555 -
-
Brushed / Brushless DC motor Driver
L298N 2A Based Motor Driver Module – Good Quality
SKU: 43821- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: 43821 -
-
-
-
-
-
-
-
-
-
-
ESP WiFi Module
ESP-12F ESP8266 Wifi Wireless IoT Board Module
SKU: 18836- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: 18836 -
-
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
SKU: 43950- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: 43950 -
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m)
SKU: 11500- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: 11500 -
Stepper Motor Drivers
DRV8825 Stepper Motor Driver with Aluminum Heat Sink- Good Quality
SKU: 52599- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: 52599 -
Stepper Motor Drivers
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
SKU: 6721- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
SKU: 6721 -
Interfacing Cables, USB Cables for Arduino
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
SKU: 7701- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 50 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: 7701 -
-
Distance Sensor
Benewake TF03 180M Long Distance Laser Lidar/Rangefinder for Drones, UAV UAS Robots.
SKU: 170838- Wide range, as far as 180m.
- Multi-interface compatibility, able to be used in many fields.
- IP67 high-strength bodywork and high reliability.
- Small in volume and easy to be integrated.
- High-speed measuring up to 10KHz, high repeated accuracy.
- Excellent highlight interference, able to be used outdoors.
SKU: 170838 -
Distance Sensor
Benewake TF03 100M Long Distance Laser Lidar/Rangefinder for Drones UAV UAS Robots
SKU: 624757- Wide range, as far as 100m.
- Multi-interface compatibility, able to be used in many fields.
- IP67 high-strength bodywork and high reliability.
- Small in volume and easy to be integrated.
- High-speed measuring up to 10KHz, high repeated accuracy.
- Excellent highlight interference, able to be used outdoors.
SKU: 624757 -
Boards Compatible with Arduino, Development Board on Sale
ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
-9%Boards Compatible with Arduino, Development Board on SaleATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
SKU: 43195- Microcontroller CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- Dimensions : 111 x 54 x 12 (LxWxH) mm.
SKU: 43195 -
Boards Compatible with Arduino
Atmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
-35%Boards Compatible with ArduinoAtmega16U2 Mega 2560 R3 Improved Version CH340G + Cable for Arduino Mega 2560 + transparent acrylic case for Arduino Mega 2560
SKU: 48077- Programmer: CH340
- Operating Voltage 5V
- Input Voltage (recommended) 7-12V
- Input Voltage (limits) 6-20V
- Digital I/O Pins 54 (of which 15 provide PWM output)
- Analog Input Pins 16
- DC Current per I/O Pin 40 mA
- DC Current for 3.3V Pin 50 mA
- Flash Memory 256 KB of which 8 KB used by bootloader
SKU: 48077 -
-
-
-
Relay Switch Modules
5V Dual Channel Relay Module with Optocoupler
SKU: 31557- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
SKU: 31557 -
PVC wire
2 Meter UL1007 22AWG PVC Electronic Wire (Red)
SKU: 528335The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528335 -
PVC wire
2 Meter UL1007 22AWG PVC Electronic Wire (Black)
SKU: 528328The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528328 -
PVC wire
2 Meter UL1007 20AWG PVC Electronic Wire (Red)
SKU: 528324The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528324 -
PVC wire
2 Meter UL1007 20AWG PVC Electronic Wire (Black)
SKU: 528313The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528313 -
PVC wire
1 Meter UL1007 18AWG PVC Electronic Wire (Red)
SKU: 528293The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528293 -
PVC wire
1 Meter UL1007 18AWG PVC Electronic Wire (Black)
SKU: 528259The use of PVC coating blends these wires with special properties such as self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes.
Self – extinguishing and flame retardant, also Conditionally resistant to oils, solvents, acids, and dyes…
SKU: 528259