KVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or KVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It’s true hardware-level access with no dependency on any remote ports, protocols or services!
This KVM-A4 kit is designed and based on Raspberry Pi Zero 2 W ONLY. So far there is no design case for them.
Note: Raspberry Pi Board is Not Included.
Features:
- Designed especially for KVM ( Raspberry Pi based KVM over IP)
- Compatible with Raspberry Pi Zero 2 W Only.
- Fully compatible with KVM OS(Raspberry Pi Zero 2W, v2 platform)
- Control a server and computer using a web browser
- HDMI Full HD capture based on the TC358743 chip
- OTG Keyboard & mouse; Mass Storage Drive emulation
- Hardware Real Time Clock (RTC) with CR1220 coin battery socket
- Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD spikes
- ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LED & power LED remotely
- Reserves the 4pin header & spacers for I2C OLED display
Package Includes:
1 x Geekworm KVM-A4 V2.0 Kit for Raspberry Pi Zero 2 W Open-source KVM Over IP
There are no reviews yet.