Explore our extensive collection of motor drivers, including popular options like the L293D motor driver, L298N motor driver, and motor driver Arduino. We offer a wide range of motor drivers with an operating voltage ranging from 12V to 24V, suitable for various applications.
The motor drivers here are available with current ratings ranging from 1A to 100A, ensuring compatibility with different motor types and power requirements. With robust construction and reliable performance, our motor drivers provide efficient control for your motors. Discover the perfect motor driver to meet your voltage and current rating needs, and enjoy precise motor control in your projects.
Brushed / Brushless DC motor Driver
Showing 1–48 of 85 results
-
Brushed / Brushless DC motor Driver
L298N 2A Based Motor Driver Module – Good Quality
SKU: 43821- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
SKU: 43821 -
-
-
Brushed / Brushless DC motor Driver
Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C
Brushed / Brushless DC motor DriverCytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C
SKU: 2777- Bi-directional control for 1 brushed DC motor, single channel
- Support motor voltage ranges from 5V to 30V.
- Maximum current up to 13A continuous and 30A peak (10 seconds).
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 2777 -
Brushed / Brushless DC motor Driver
12V-40V10A DC Motor PWM Speed Control Switch Governor
SKU: 699487Input supply voltage: DC 12V-40V
The maximum output power: 400W
The maximum continuous output current:8A
Static Current:0.02 A ( Standby )
PWM frequency: 13kHz
Duty Cycle adjustable: 10%-100%SKU: 699487 -
Brushed / Brushless DC motor Driver
Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
Brushed / Brushless DC motor DriverCytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
SKU: 3405- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 3405 -
Brushed / Brushless DC motor Driver
L293D Motor Driver Module
SKU: 1501289- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
SKU: 1501289 -
Brushed / Brushless DC motor Driver
L293D Motor Driver Module
SKU: 5825- The driver two holes of 3 mm dia.
- Male burg-stick connectors for supply, ground and input connection.
- Screw terminal connectors for easy motor connection.
- High noise immunity inputs.
- Operating Voltage(VDC): 4.5 to 12
- Peak Current (A): 600 mA
- No. of Channels: 1
SKU: 5825 -
Brushed / Brushless DC motor Driver
Motor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
Brushed / Brushless DC motor DriverMotor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
SKU: 43846- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
- Peak Current (A): 3.2
- Continuous Current (A): 1.2
- No. of Channels: 1
SKU: 43846 -
Brushed / Brushless DC motor Driver
20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)
Brushed / Brushless DC motor Driver20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)
SKU: 51649- Adjustable speed range: 0%-100%.
- Speed adjustment way: Potentiometer.
- Output voltage: Linear under load.
- Speed control type: Basins.
- Output voltage: Load Linear
- Type: Adjusting flow
- The motor running condition adjustment: Forward / Stop / Reverse
SKU: 51649 -
-
Brushed / Brushless DC motor Driver
MD13S 13Amp DC Motor Driver – GROVE Compatible
SKU: 24027-
Support motor voltage ranges from 6V to 30V
-
Maximum current up to 13A continuous and 30A peak (10 seconds).
-
GROVE compatible
-
3.3V and 5V logic level input.
-
SMD compatible
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 1
- No. of Channels: 1
SKU: 24027 -
-
Brushed / Brushless DC motor Driver
Cytron 30Amp DC Motor Driver (Peak 80Amp) MD30C R2
SKU: 2774- Bi-directional control of 1 brushed DC motor.
- Motor Voltage: 5V – 30V.
- Maximum Current: 80A peak (1 second), 30A continuously.
- Reverse polarity protection.
- 3.3V and 5V logic level input.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 2774 -
-
-
-
Brushed / Brushless DC motor Driver
Monster Moto Shield VNH3SP30 Motor Driver 14A (Peak 30A)
SKU: 28546- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 34 mΩ
- Maximum PWM frequency: 10 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: 28546 -
-
-
Brushed / Brushless DC motor Driver
Dual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
Brushed / Brushless DC motor DriverDual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
SKU: 28535- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: 28535 -
Brushed / Brushless DC motor Driver
Cytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT)
Brushed / Brushless DC motor DriverCytron 10 A Switch Control Potentiometer DC Motor Driver (MD10POT)
SKU: 234226The MD10-POT control circuit is designed to enable the speed to be controlled via a potentiometer (10K Ohm) which is included in the package. It does not work with analog voltage from an external controller The 3-way rocker switch is used for start/stop and direction control.
SKU: 234226 -
-
Brushed / Brushless DC motor Driver
Cytron Smart Drive Mdds30 Dual 30A (80A Peak)
SKU: 29672- Battery low voltage indicator.
- Battery over voltage indicator.
- Thermal protection.
- Current limit protection.
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Dimension: 103 x 97 x 40 (LxWxH) mm.
SKU: 29672 -
Brushed / Brushless DC motor Driver
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
SKU: 699566- Motor Power Range: 4.5V ~ 36V
- Control supply range: 4.5V ~ 9V
- Logical operating current Iss: ≤60mA
- Driving part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W (T = 90 ℃)
- Operating temperature : -25 ℃ ~ + 125 ℃
- Drive Type: Dual high-power H-bridge driver
SKU: 699566 -
Brushed / Brushless DC motor Driver
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
Brushed / Brushless DC motor DriverMini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
SKU: 130220- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
SKU: 130220 -
-
Brushed / Brushless DC motor Driver
SmartElex 15D Smart Motor Driver (Powered By Raspberry Pi)
SKU: 1734772- Support motor voltage from 7V to 22V.
- Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.
- Overcurrent and Thermal protection.
- Multiple input modes: RC, Analog, PWM, Serial Packetized.
- On-board push buttons for test and manual operation.
- Type-C USB for SERIAL Mode
SKU: 1734772 -
Brushed / Brushless DC motor Driver
SmartElex 15D Smart Motor Driver
SKU: 199307- Support motor voltage from 7V to 28V.
- Onboard Low, Internal resistance MOSFETs are switched at 16 KHz frequency.
- Overcurrent and Thermal protection.
- Multiple input modes: RC, Analog, PWM, Serial Packetized.
- On board push buttons for test and manual operation.
SKU: 199307 -
Brushed / Brushless DC motor Driver
Cytron SmartDriveDuo-10 MDDS10 DC MOTOR DRIVER
SKU: 4565-
Single power operation
-
Dual Channels means it can drive two brush motor independently, or mixed.
- Support Signed magnitude and Locked Anti-phase in PWM mode.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Power, Error indicator, RUN status (Left and Right) LEDs
-
On board reset button to restart the MCU after changing operation mode.
-
Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
SKU: 4565 -
-
Brushed / Brushless DC motor Driver
Sabertooth Dual 12A Motor Driver
SKU: 4692- 12A continuous, 25A peak per channel Up to 24V in
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Peak Current (A): 25A
- Continuous Current (A): 12
- Operating Voltage(VDC): 18 to 24V
- No. of Channels: 2
SKU: 4692 -
Brushed / Brushless DC motor Driver
Enhanced Cytron 40Amp DC Motor Driver (Peak 80amp) MDS40B
SKU: 11648-
Bi-directional control for a single brushed DC motor.
-
Support motor from 10V to 45V.
-
Maximum current up to 80A peak, reduce to 40A gradually according to temperature.
-
16 KHz switching frequency for quiet operation.
-
NO Reverse polarity protection.
-
Protection of overvoltage.
SKU: 11648 -
-
Brushed / Brushless DC motor Driver
SmartElex 30D Smart Motor Driver (Powered by Raspberry Pi)
SKU: 1734773- Supplying 30 amps continuously with peak currents up to 85 amps (2 Sec) per channel.
- Support motor voltage from 7V to 28V.
- Onboard Low Internal resistance MOSFETs are switched at 16KHz frequency.
- Overcurrent protection and indication.
- Thermal protection.
- Type-C USB for SERIAL Mode
SKU: 1734773 -
Brushed / Brushless DC motor Driver
Cytron 25A 7V-58V DC motor driver with Switch and Potentiometer Control (MD25HV POT)
Brushed / Brushless DC motor DriverCytron 25A 7V-58V DC motor driver with Switch and Potentiometer Control (MD25HV POT)
SKU: 497900- Bidirectional control for one brushed DC motor.
- Maximum Motor Current: 25A continuous, 60A peak.
- 5V output for the host controller (250mA max).
- Buttons for quick testing.
- PWM frequency up to 40kHz.
- Dual Input Mode: PWM/DIR or Potentiometer/Switch Input.
SKU: 497900 -
Brushed / Brushless DC motor Driver
SmartElex 30D Dual Channel 30A Smart DC Motor Driver
SKU: 77719- Supplying 30 amps continuous with peak currents up to 85 amps (2 Sec) per channel.
- Support motor voltage from 7V to 30V.
- Onboard Low Internal resistance MOSFETs are switched at 16 KHz frequency.
- Overcurrent protection and indication.
- Thermal protection.
- Multiple input modes: RC, Analog, PWM, Serial Packetized.
- On board push buttons for test and manual operation.
SKU: 77719 -
Brushed / Brushless DC motor Driver
Sabertooth Dual 25A Motor Driver
SKU: 4698- 25A continuous, 50A peak per channel
6-30V nominal, 33.6V absolute maximum - Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
SKU: 4698 - 25A continuous, 50A peak per channel
-
Brushed / Brushless DC motor Driver
12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
Brushed / Brushless DC motor Driver12V 24V 36V 40A PWM DC Motor Speed Controller Forward Reverse Adjustable Knob Switch with Case
SKU: 1307994- Input voltage: DC12 to 36V (equal to the rated voltage of the motor)
- Output voltage: linear under load
- Maximum current: 50A
- Continuous current: 40A
- Support motor: DC brush motor
SKU: 1307994 -
Brushed / Brushless DC motor Driver
Sabertooth Dual 32A Motor Driver
SKU: 4702- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
SKU: 4702 -
-
Brushed / Brushless DC motor Driver
Kangaroo X2 Motion Controller
SKU: 15839- Model: Kangaroo x2
- 2 channel self-tuning PID controller
- Position or speed control
- Quadrature encoder feedback or potentiometer feedback
- Support for limit switches and mechanical stops
- Analog, R/C, and serial inputs
SKU: 15839 -
Brushed / Brushless DC motor Driver
Cytron SmartDriveDuo-60 MDDS60 60A (100A peak)
SKU: 8014-
Input Voltage (Motor): 10 – 45VDC
- Maximum current up to 100A peak (1 second), 60A continuously, each channel.
-
Two manual/test buttons for each channel.
-
Two output indicator LEDs for each channel.
-
Suitable for combat or sumo robot.
- Battery Low Voltage Monitoring Mode
- DC Brush motor Driver, not for brushless motor
- Dual Channels, it can drive two brush motor independently, or mixed.
SKU: 8014 -
-
-
Brushed / Brushless DC motor Driver
Cytron 10Amp 7V-30V DC Motor Driver for R/C (2 Channel) MDDRC10
SKU: 945382- Operating Voltage: DC 7 V to 30 V
- Maximum Motor Current: 10 A continuous, 30 A peak
- Motor Output PWM Frequency: 20 kHz
- RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V
- Output Maximum Current: 0-500 mA
SKU: 945382
