Explore the wide range of extremely high quality and lightweight electronic speed controller for drone. As the best supplier of ESC in India, we believe in providing vibrant customer support. To get a list of ESC for drone visit our products.
An electronic speed control or ESC is an electronic circuit that controls and regulates the speed of an electric motor. It may also provide reversing of the motor and dynamic braking. Miniature electronic speed controls are also useful in electrically powered radio-controlled models. An ESC Controller is a device that regulates the power of an electric motor; allowing it to throttle from 0% to 100%. There are two styles of Electronic Speed Controller, with Brush and Brushless.
(ESC) Drone Speed Controller
Showing 1–48 of 65 results
-
-
(ESC) Drone Speed Controller
30A Blheli ESC
SKU: 1119167- Brushed/Brushless: BL
- Cont./Peak Current: 30A/40A
- Input: 2-3S LiPo
- BEC Output: Linear mode:5V,2A
- Input Wires: Red-18AWG-100mm*1, Black-18AWG-100mm*1
- Output Wires:Black-18AWG-75mm*3
- Input Connectors: 3.5 Gold Connectors (Female)
- Output Connecotors: No
- LED Program Card: Supported
- WiFi Module: Not Supported
- Size: 68.0×25.0x8.0mm
- Weight: 37g
SKU: 1119167 -
(ESC) Drone Speed Controller
DYS 30A Brushless ESC for FPV Drone
SKU: 988116- Model: XSD30A
- Processor:Â Silabs EFM8BB21
- Battery: 3-6S Lipo
- Current Rating: 30Amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: 988116 -
(ESC) Drone Speed Controller
Hobbywing quickrun 1060 60A brushed ESC1073166
SKU: 1119199- Model: Wp-1060-BRUSHED
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Power Rating Upto 60 Amps
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 3A/5V (Linear Mode)
- PWM Frequency: 1KHz
- Battery Compatibility LiPo/NiMh
- Battery Connector Type Tamiya Connector
- Motor Connector Type 4mm Bullet Classic Crimp Terminal
SKU: 1119199 -
(ESC) Drone Speed Controller
HobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed ​​Controller
(ESC) Drone Speed ControllerHobbyWing QuicRun 1625 25A waterproof Brushed Electronic Speed ​​Controller
SKU: 1251292- Waterproof and dustproof, suitable for races in all weather conditions.
- Small size with built-in capacitor module.
- Fwd/Rev/Br running mode fits various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
- Great current endurance capability.
- Great built-in BEC output capacity.
SKU: 1251292 -
(ESC) Drone Speed Controller
Hobbywing Quicrun 1:10 1/8 Wp Crawler Borstel Geborsteld 80A ESC
SKU: 1119200- Input Voltage: 2-3S Lipo/5-9 Cell NiMH
- Cont./Peak Current: 80A/400A
- Power Rating Upto 80 Amps
- Battery Connector Type XT-60
- BEC Output: Switch Mode: 6V/[email protected]
- Battery Compatibility LiPo/NiMh
SKU: 1119200 -
(ESC) Drone Speed Controller
Hobbywing Skywaller 80A UBEC
SKU: 11192061 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)SKU: 1119206 -
-
-
-
(ESC) Drone Speed Controller
Hobbywing Skywaller-60A- UBEC
SKU: 11192051 Output: Continuous 60A, Burst 80A up to 10 seconds.
2 Input Voltage: 2-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
6 Size: 77mm*35mm*14mm.
7 Weight: 63gSKU: 1119205 -
(ESC) Drone Speed Controller
T MOTOR AIR 40A ESC
SKU: 1092910- Output: Continuous 40A, Burst 60A up to 10 Secs.
- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
SKU: 1092910 -
(ESC) Drone Speed Controller
T Motor ALPHA 40A 6S ESC
SKU: 1241806- Model: ALPHA 40A
- Brand: T-motor
- Voltage: 4-6S ( 18-25.2V)
- Current: 40A
- Throttle range: 1100-1940μs
- Special core program for multi-rotor controller greatly improve throttle response
- Power by independence stabilivolt IC supply microprocessor is with better antijamming performance for stability
SKU: 1241806 -
(ESC) Drone Speed Controller
T MOTOR FLAME 60A HV ESC
SKU: 1092909- Output:Â Â Continuous 60A, Burst 80A up to 10 Secs.
- Input Voltage:Â 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC:Â Â Pentium-60A: 3A / 5V (Switch mode).
- Max Speed:Â 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
SKU: 1092909 -
-
-
-
-
-
(ESC) Drone Speed Controller
DYS 30A Multi-Copter Brushless Speed Controller Programmable with 5V/3A BEC (Original)
(ESC) Drone Speed ControllerDYS 30A Multi-Copter Brushless Speed Controller Programmable with 5V/3A BEC (Original)
SKU: 867292-
Running current: 30A(Output: Continuous 30A, Burst 40A up to 10 Secs.)
-
 Input Voltage: DC 6-16.8V(2-4S Lixx)
-
BEC: 5V/2A.
-
 With SimonK updated firmware for Multi-Copter
SKU: 867292 -
-
(ESC) Drone Speed Controller
DYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)
(ESC) Drone Speed ControllerDYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)
SKU: 18270- Designed specifically for multi-rotors
- Twisted servo cable to reduce interference
- Fast throttle response
- Low resistance MOSFETs
- Small and lightweight
- Thicker PCB for better heat dissipation
SKU: 18270 -
(ESC) Drone Speed Controller
DYS 40A Multi-Copter Brushless Speed Controller Programmable ESC with 5V/3A BEC (Original)
(ESC) Drone Speed ControllerDYS 40A Multi-Copter Brushless Speed Controller Programmable ESC with 5V/3A BEC (Original)
SKU: 867293-
Running current: 40A(Output: Continuous 40A, Burst 60A up to 10 Secs.)
-
 Input Voltage: DC 6-22.2V(2-4S Lixx)
-
BEC: 5V/3A
-
 With SimonK updated firmware for Multi-Copter
SKU: 867293 -
-
(ESC) Drone Speed Controller
DYS 45A Brushless Speed Controller ARIA 4-in-1 ESC (Original)
SKU: 867294- Strong anti-interference ability
- PCB adopts 6-layer, low inner resistance
- Built-in Current detection module, which can cooperate with the flight control to detect the current value
- Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
- The Dshot series calls the 150/300/600/1200
- Support 2S-6S, 4PWM input without BEC
SKU: 867294 -
(ESC) Drone Speed Controller
DYS 60A Brushless Speed Controller ARIA 4-in-1 ESC (Original)
SKU: 867295- Strong anti-interference ability
- PCB adopts 6-layer, low inner resistance
- Built-in Current detection module, which can cooperate with the flight control to detect the current value
- Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
- The Dshot series calls the 150/300/600/1200
- Support 2S-6S, 4PWM input without BEC
SKU: 867295 -
(ESC) Drone Speed Controller, Drone Parts on Sale
DYS XSD12A ESC Solder Version (Original)
SKU: 867288- Model: XSD12AÂ Solder version
- Processor:Â Silabs EFM8BB21
- Battery: (2-3S Lipo)
- Current Rating: 12amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: 1-2ms signal, Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: 867288 -
(ESC) Drone Speed Controller, Drone Parts on Sale
DYS XSD20A ESC Solder Version (Original)
SKU: 867289- Model: XSD20AÂ Solder version
- Processor:Â Silabs EFM8BB21
- Battery: 12.6-16.8V (3-4S Lipo)
- Current Rating: 20Amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: 1-2ms signal, Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: 867289 -
(ESC) Drone Speed Controller
EMAX 4x30A 2-4S 4in1 ESC for Multirotor (Original)
SKU: 29165- Run on SimonK firmware, optimized to achieve best flight performance
- Integrated with four ESCs, yet require only one power supply
- Space saving design, easy repair, and replacement
- BEC board, control board, and power board are separated
- Motor wire sockets are not soldered
- Built with low-voltage and overheating protections as well as self-check function
- Throttle range can be set for each ESC, compatible with a variety of receivers
- High-efficiency UBEC with only one set of BEC voltage output wire
SKU: 29165 -
-
-
-
-
-
-