Search results: “121508”
Showing 1–48 of 74 results
-
3D Printer Extruder Parts and Fans, Cooling Fans
HE3D 12V DC 3D Printer 5015 Vortex Turbo Cooling Fan
3D Printer Extruder Parts and Fans, Cooling FansHE3D 12V DC 3D Printer 5015 Vortex Turbo Cooling Fan
SKU: 121508- 50mm Radial Cooling fan.
- 12V 2-point Pin DC 0.13A.
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 121508 -
-
-
Light/color Sensor
Waveshare TCS34725 Color Sensor, High Sensitivity, I2C
SKU: 1219082- Sensor: TCS34725FN
- Operating voltage: 3.3V/5V
- I2C communication uses a few pins
- Outputs light intensity, feel the light like human eyes
- Integrates IR blocking filter, minimizes the IR spectral component of the incoming light
SKU: 1219082 -
-
3D Printer Extruder Parts and Fans
PC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
3D Printer Extruder Parts and FansPC4-01 Pneumatic Push for V6 Bowden Extruders 4mm tube J-Head Fitting
SKU: 921908- Inside Diameter: 4mm
- Thread Size: M10
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials:Â Nickel Plated Brass
- Release Method:Â Elliptical John Guest Fitting
SKU: 921908 -
-
-
Light/color Sensor
Waveshare TSL25911 High Sensitivity Digital Ambient Light Sensor I2C Interface
SKU: 1219085- Supply voltage: 3.3 V to 5 V
- System: TSL25911FN
- Communication interface: I2C
- Interface address: fixed 0x29
- Measurement range: from 0 lx to 88000 lx
- Sensitivity: up to 188 ulx
- Dynamics: 600M:1
- The device is compatible with: Arduino, Raspberry Pi, STM32
SKU: 1219085 -
-
-
-
-
-
-
-
Water TDS, pH, Flow, Level and Pressure Sensor
Waveshare BMP388 High Precision Barometric Pressure Sensor Accurate Altitude Tracing
Water TDS, pH, Flow, Level and Pressure SensorWaveshare BMP388 High Precision Barometric Pressure Sensor Accurate Altitude Tracing
SKU: 1219058- Operating voltage: 3.3V/5V
- Communication interface: I2C/SPI
- Barometric pressure operation range: 300~1250hPa
- Possible sampling rate: 200Hz
- Operating temperature: -40~85℃
- Dimension: 32mm × 20mm
SKU: 1219058 -
-
LDR, Light/color Sensor
12mm GL12528 Light Sensitive Photoresistor LDR (2Pcs)
SKU: 611822- Diameter: 12 mm
- No. of pins: 2
- Type of mounting: PCB Through Hole
- Maximum Operating Temperature: +70ËšC (Approx.)
- Dark resistance: 1-20MΩ
- Spectral peak: 560nm
- Maximum voltage: 250 VDC
- Maximum wattage: 200 mW
- Light resistance (10 Lux): 10-20 KΩ
- Dark resistance: 2 MΩ
- Resistance illumination: 3
- Response time: 20ms (Rise), 30ms (Down)
SKU: 611822 -
-
-
Interface Module
Waveshare Industrial Grade SIM7600G-H 4G DTU, USB UART/RS232/RS485 Multi Interfaces Communication, LTE Global Band Support
Interface ModuleWaveshare Industrial Grade SIM7600G-H 4G DTU, USB UART/RS232/RS485 Multi Interfaces Communication, LTE Global Band Support
SKU: 1219068- Based on Qualcomm platform 4G communication module
- Features RS232, RS485, and TTL port (3.3V/5V)
- USB Port, support USB dial-up, configuration, AT command, and so on.
- Hardware watchdog to avoid a crash
- The fault restart time is configurable.
- The trigger time and triangle length of UART are configurable.
- Industrial design, with EMC
- Working temperature: -40°C ~ 80°C
- Easy to use
SKU: 1219068 -
-
Temperature & Humidity Sensor
DS18B20 Water Proof Temperature Probe – Black (1m)
SKU: 11500- A probe by new original installation import DS18B20 temperature sensor chip.
- Chip each pin use heat shrinkable tube to prevent short circuit, internal sealing glue, waterproof, moistureproof.
- Stainless steel tube encapsulation waterproof moistureproof prevent rust.
- Stainless steel shell (6 * 45 mm), lead length 100 cm (shielding wire) use stability.
- Without the external components, the unique single bus;
SKU: 11500 -
-
Display for Arduino
1602 LCD Board Keypad Shield Blue Backlight
SKU: 12198- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: 12198 -
Vibration/Tilt Sensor and Modules
Vibration sensor module alarm Motion sensor module vibration switch SW-420
Vibration/Tilt Sensor and ModulesVibration sensor module alarm Motion sensor module vibration switch SW-420
SKU: 11507- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
SKU: 11507 -
Temperature & Humidity Sensor
AM2108 RH&T Sensor Module
SKU: 1290198- Relative humidity and temperature output
- Superior sensor performance, typical accuracy RH: ±2%, T: ±0.3℃
- Fully calibrated and processed digital output, I²C protocol
- Wide voltage support 2.2 to 5.5V DC
- Excellent long-term stability
- Fast-response and anti-interference capab
SKU: 1290198
