Our category for Sensor ICs offers a wide selection of options to meet your sensing needs. Explore temperature sensors, gyro sensors, pressure sensors, gas sensors, and more. These sensor ICs provide accurate and reliable measurements for various applications.
Whether you require temperature monitoring, motion detection, pressure measurement, or gas analysis, our collection of sensor ICs has you covered. With different sensing technologies and interfaces available, you can find the ideal sensor IC to suit your specific requirements.
Browse through our selection and discover the sensor ICs that will enhance your electronic systems and enable precise sensing capabilities.
Sensor ICs
Showing all 9 results
-
Sensor ICs
LM35 TO-92-3 Board Mount Temperature Sensors
SKU: 162126- Calibrated directly in Degree Celsius (Centigrade)
- Linear at 10.0 mV/°C scale factor
- 0.5°C accuracy guarantee-able (at a25°C)
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 mA current drain
- Low self-heating, 0.08°C in still air
- Non-linearity only 0.25°C typical
SKU: 162126 -
Sensor ICs
MPU 6050 QFN-24 3-Axis Gyro/Accelerometer IC
SKU: 162123- User-programmable digital filters for gyroscope, accelerometer, and temp sensor
- Digital-output temperature sensor
- 9-Axis MotionFusion by the on-chip digital motion processor (DMP)
- Auxiliary master I2C bus for reading data from external sensors
- Minimal cross-axis sensitivity between the accelerometer and gyroscope axes
- MEMS structure hermetically sealed and bonded at the wafer level
- 10,000 g shock tolerant
- 400kHz fast mode I2C for communicating with all registers
SKU: 162123 -
Sensor ICs
ADXL345 LGA-14 3-axis Accelerometer
SKU: 162122- Power consumption scales automatically with bandwidth
- User-selectable resolution
- Patent pending, embedded memory management system with FIFO technology minimises host processor load
- Single tap/double tap detection
- Activity/inactivity monitoring
- Free-fall detection
- SPI (3- and 4-wire) and I2C digital interfaces
- Flexible interrupt modes map able to either interrupt pin
- Measurement ranges selectable via serial command
SKU: 162122 -
Sensor ICs
MPU-9250 QFN-24 9-axis Inertial Measurement Units IC
SKU: 162124MPU-9250 QFN-24 9-axis Inertial Measurement Units IC consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis Accelerometer. Hence, the MPU-9250 is a 9-axis motion tracking a device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor (DMP) all in a small 3x3x1mm package available as a pin-compatible upgrade from the MPU6515.
SKU: 162124 -
Sensor ICs
BMP180 LGA-7 Digital Pressure Sensor IC
SKU: 162125The BMP180 comes as a fully calibrated, ready-to-use sensor module without the need for additional external
circuitry. Pressure and temperature data are provided as 16-bit values, which, together with the stored calibration data, are used for temperature compensation on the external microcontroller. Data transfer can be performed via I2C or SPI interfaces.SKU: 162125 -
Sensor ICs
INEMO Inertial Module – LSM6DSL/LSM6DSLTR/SF 70S
SKU: 511764- Power consumption: 0.4 mA in combo normal mode and 0.65 mA in combo high-performance mode
- “Always-on” experience with low power consumption for both accelerometer and gyroscope
- Smart FIFO up to 4 kbyte based on features set
- Android M compliant
- ±2/±4/±8/±16 g full scale
- ±125/±250/±500/±1000/±2000 dps full scale
- Analog supply voltage: 1.71 V to 3.6 V
SKU: 511764
