Interface IC
Showing all 9 results
-
Interface IC
CH340G SOIC16 USB to Serial TTL-RS232 converter IC
SKU: 162175- ull speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and
capacitance external. - Emulate standard serial interface, used to upgrade the former peripheral device, or add excess serial
interface through USB. - Totally compatible with the serial application program in a computer endpoint Windows operation system.
- Hardware full duplex serial interface, set transceiver buffer, supports communication baud rate varies
from 50bps to 2Mbps. - Supports common MODEM liaison signal RTS, DTR, DCD, RI, DSR and CTS.
- Through adding level converter equipment to supply RS232, RS485, RS422 and another interface.
- Supports IrDA criterion SIR infrared communication, supports baud rate varies from 2400bps to
115200bps.
SKU: 162175 - ull speed USB device interface, conforms to USB Specification Version 2.0, only needs crystal and
-
Interface IC
FT232RL SSOP-28 USB Interface IC
SKU: 162012- Single chip USB to asynchronous serial data transfer interface
- Entire USB protocol handled on the chip – No USB-specific firmware programming required
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits & odd/even/mark/space/no parity
- Fully assisted hardware or X-On / X-Off software handshaking
- In-built support for event characters and line break condition
- New USB FTDIChip-ID feature
- New configurable CBUS I/O pins
- Auto transmit buffer control for RS485 applications
- Transmit and receive LED drive signals
SKU: 162012 -
Interface IC
MAX232CPE PDIP-16 RS-232 Interface IC (Pack of 2 ICs)
SKU: 162015- Operates With Single 5V Power Supply
- LinBiCMOS Process Technology
- Two Drivers and Two Receivers
- ±30-V Input Levels
- Low Supply Current . . . 8 mA Typical
- Meets or Exceeds TIA/EIA-232-F and ITURecommendation V.28
- Designed to be Interchangeable WithMaxim MAX232
SKU: 162015 -
Interface IC
MAX232CSE SOIC-Narrow-16 RS-232 Interface IC (Pack of 2 ICs)
SKU: 162018- Operates With Single 5-V Power Supply
- LinBiCMOS Process Technology
- Two Drivers and Two Receivers
- ±30-V Input Levels
- Low Supply Current . . . 8 mA Typical
- Meets or Exceeds TIA/EIA-232-F and ITURecommendation V.28
- Designed to be Interchangeable WithMaxim MAX232
SKU: 162018 -
-
Interface IC
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC
SKU: 162173- Fully Compliant with USB Specification v2.0 (Full-Speed)
- Extensive Flow Control Mechanism
- Configurable 512-byte bi-directional data buffer
- Supports remote wake-up from MODEM input signals
- Two general purpose I/O (GPIO) pins
- Optional external EEPROM for startup device configurations
SKU: 162173 -
IC's on Sale, Interface IC
PL2303HX SSOP28 USB-to-Serial Bridge Controller IC (Revision A)
SKU: 557997- Fully Compliant with USB Specification v2.0 (Full-Speed).
- On-Chip USB 1.1 transceiver, 5V ~ 3.3V regulator, and 12 MHz crystal oscillator.
- Supports RS232-like Serial Interface.
- Configurable 512-byte bi-directional data buffer.
- Supports remote wake-up from MODEM input signals.
- Two general-purpose I/O (GPIO) pins.
- Small footprint 28-pin SSOP IC package.
- RoHS compliant.
SKU: 557997
