Generic
Showing 2497–2544 of 7971 results
-
18 to 22 AWG
18AWG Multicore insulated cable(3 cores) Silicone-Red-Black-Green
SKU: R164426- Rated Voltage: 600V
- Rated Temperature: -60°C~+200°C
- Color: Red-Black-Green
- AWG:18
- Note : 1 Qty = 1 Meter. The standard roll length is 100 meters
- Cable length will be continuous as per your ordered Qty.
SKU: R164426 -
Lead Screw and Nut
300mm Trapezoidal Single Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut300mm Trapezoidal Single Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 1769102- Lead Screw Material: 304 Stainless Steel.
- Single Start
- Length: 300mm.
- Diameter: 8mm.
- 1 Start Lead Screw
- Brass Nut Size: 10 x 13 x 22 mm.
- Mainly used for Steering motor driving guide rail.
- T-shaped design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 1769102 -
-
1S Li-ion BMS
1S 3.7V 7.5A 5MOS BMS Li- ion 18650 Battery Protection Board
SKU: 1165398- Over charge detection voltage : 4.25 + 0.05V
- Over charge release voltage : 4.23 + 0.05V
- discharge detection voltage : 2.45 + 0.1V
- Ceiling continuous current : 12A
- Overcurrent detection current : 7.5A
- Input Charging voltage : 3.7V
SKU: 1165398 -
-
Vibratory Motors
3V 4*8MM Hollow Cup Miniature Micro DC 4X8 Vibration Motor with Transparent Tube (Red+Blue Wire about 10mm)
Vibratory Motors3V 4*8MM Hollow Cup Miniature Micro DC 4X8 Vibration Motor with Transparent Tube (Red+Blue Wire about 10mm)
SKU: 1770427- Rated Voltage: 3V DC
- Voltage Range: 1V – 3.5V DC
- Rotation Direction: Clockwise (CW)
- Rated Current: 100mA max
- Rated Speed: 14,000 ± 10% rpm
- Stall Current: 140mA max
- Start Voltage: 0.8V DC
SKU: 1770427 -
Gas and Dust Sensor
MQ-136-Hydrogen Sulfide Gas Sensor
SKU: 975811- Dual signal output (analog output and TTL level output)
- The TTL output effective signal is low.
- Analog output 0 ~ 5V voltage, the higher the concentration the higher the voltage.
- Good sensitivity to hydrogen sulfide, liquefied gas, natural gas, city gas, and smoke.
- with long service life and reliable stability
- fast response recovery characteristics
SKU: 975811 -
Audio Amplifier Module
TEA5767 Stereo FM Radio Module with Detachable Antenna
SKU: 410807- Directly plug antenna interface.
- I2C bus communication.
- Multi-capacitor combined filter.
- Blue LED power indicator.
- High sensitivity(low noise RF input amplifier).
- High power auto gains control AGC circuit.
SKU: 410807 -
Water pH, TDS Meter, Flow, Level Sensor
XH-M203 12V 10A Water Level Controller Module
SKU: 1794279- Current: Operating – 200mA Relay Switch – 10A (Please note this is not the actual current that can handle the relay. we recommended up to 3A. If you are looking for higher current switching please add another high current switch with module relay.)
- Type: LED indicator for water level.
- I/O Pins: Water Level High input & Water Level Low input.
- Operating Voltage: AC12V DC12V.
SKU: 1794279 -
Battery Holders and Spacers
2 x 21700 Battery Holder with 21.75MM Bore Diameter
SKU: 1187456- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.75MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187456 -
-
Shield for Arduino
ESP8266 Serial WiFi Expansion Board Module for Arduino
SKU: 815831- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Standard native WiFi 802.11b / g / n
- Operates in AP, Station or AP + Station mode
SKU: 815831 -
-
Boards Compatible with Arduino
Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
Boards Compatible with ArduinoNano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
SKU: 1150761- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
This is a clone version, we highly recommend the original Arduino: Know More
SKU: 1150761 -
Relay Modules
4 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
Relay Modules4 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU: 1121251- Supply Voltage: DC 5V
- Quiescent Current: 5mA
- Maximum Operating Current: 190mA
- Trigger Mode: high and low-level trigger
- Load Voltage: DC 30V / AC250
- Load Current: 30A
- Relay Life: more than 100,000 times
- Trigger Voltage Range: Low-level trigger: 0-2V relay ON; 3-5V relay OFF; High-level trigger: 3.3-5V relay ON; 0-2.5V relay OFF
SKU: 1121251 -
-
-
-
Digital Voltage, Current and Frequency Meter
Dual Led 0.28 ” Display for DC0-100V 100A Voltage and Current Test Digital Instrument, Digital Meter Panel Amplifier Red Blue 100A
Digital Voltage, Current and Frequency MeterDual Led 0.28 ” Display for DC0-100V 100A Voltage and Current Test Digital Instrument, Digital Meter Panel Amplifier Red Blue 100A
SKU: 1187599- Operating current: 20mA
- Operating voltage: DC 4.5 ~ 30V
- Minimum resolution(V): 0.1V
- Minimum resolution(A): 0.01A
- Display color: Red and Blue (two-color display)
- Measure accuracy: 1%
SKU: 1187599 -
-
-
-
-
