Search results: “e-bike pinion” – Page 145
Showing 6913–6960 of 9324 results
-
-
Relay Modules
12V 1 Channel Bluetooth, Relay Module Things, Smart Home Remote, Control Switch
SKU: 1121211- Easy to set up and pair with Android Phone
- Onboard Bluetooth status indicator and relay indicator
- With 4 optocoupler isolation, strong anti-interference ability
- Onboard N76E003/STM8S003 and SPP-C Bluetooth 2.1 module
- Effective control distance(on open area): 10m
- Module Operating Voltage: 12VDC
SKU: 1121211 -
Solenoids and Electromagnets
DC 12V Solenoid Valve 1/8″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
Solenoids and ElectromagnetsDC 12V Solenoid Valve 1/8″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
SKU: 975726- Valve Type: 2 Way Normally Open
- Port Size: 1/8″ NPT Female Port
- Coil Voltage: DC12V
- Flow Model: Uni-Directional
- Flow Rate: 0.23Cv (Fluid Flow)
- Response Time: Less than 50 ms
- Operating Pressure: 1.2Mpa
SKU: 975726 -
ARM Microcontroller
MICROCHIP Expansion Kit, Xplained Pro, Bosch BNO055 Intelligent 9-Axis Absolute Orientation Sensor
ARM MicrocontrollerMICROCHIP Expansion Kit, Xplained Pro, Bosch BNO055 Intelligent 9-Axis Absolute Orientation Sensor
SKU: 1470049- Product: MICROCHIP Expansion Kit, Xplained Pro, Bosch BNO055 Intelligent 9-Axis Absolute Orientation Sensor
- Compatible with the Xplained Pro extension headers
- I2C interface to BNO055
- One RGB LED
SKU: 1470049 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
IMU, Accelerometer, Magnetometer & GyroscopeGY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
SKU: 419760- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage:Â 3 -5 V DC.
- Driver Chip: QMC5883L.
- Communication:Â I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
SKU: 419760 -
-
-
Relimate Connectors and Housings
JST-SH-1MM-3 pin Female Housing Connector with 300mm Wire(30 AWG)
SKU: R103380- MPN: WD100EW-03
- Brand: Wenda Connectors
- Connector Type: Female Housing Connector
- Pitch: 1mm
- No.of pins: 3 pin
- Insulation Impedance: 10 Mohm DC 300 V
- Wire Length: 300mm
- Wire Gauge: 30 AWG
SKU: R103380 -
-
ARM Microcontroller
STMICROELECTRONICS NUCLEO-L496ZG-P Development Board STM32L496ZGTP MCU SMPS Arduino ST Zio and Morpho Connectivity
ARM MicrocontrollerSTMICROELECTRONICS NUCLEO-L496ZG-P Development Board STM32L496ZGTP MCU SMPS Arduino ST Zio and Morpho Connectivity
SKU: 1382841- Product: NUCLEO-L496ZG-P Development Board
- Source options for power supply are USB charger, VIN (7 – 12V) from ST Zio connector
- ST-LINK/V2-1 standalone kit capability
- USB re-enumeration capability, virtual COM port, mass storage, debug port
- 1Mbyte STM32 flash memory size, MCU with SMPS function
SKU: 1382841 -
-
-
-
Advance Development Boards
Digilent Basys 3 Artix-7 FPGA Trainer Board Recommended for Introductory Users
Advance Development BoardsDigilent Basys 3 Artix-7 FPGA Trainer Board Recommended for Introductory Users
SKU: 1680717- Product: Basys 3 Artix-7 FPGA Trainer Board
- 33,280 logic cells in 5200 slices
- Maximum Clock Frequency (MHz): 450
- RAM: 1,800 Kbits
- Display: 4-digit 7-segment
- Output: 12-bit VGA
SKU: 1680717 -
-
-
-
Digital Multimeters and Clampmeter
HTC LCR-4070 Digital LCR Meter 3½ Digit Display
SKU: 1870040- Model: HTC LCR-4070 Digital LCR Meter 3½ Digit Display
- 3½ Digit Display, 2000 Counts
- Large LCD Display
- Full Protection function, capacitor with the function of Self-discharge
- Auto Power OFF
- Low Battery Indication Approx. <7.5V
- Sampling Rate 3 times per second
- Capacitance discharge protection
SKU: 1870040 -
-
Raspberry Pi Hats
40pin Prototype Pi board Prototyping Pi Plate for Raspberry Pi 3/4B
SKU: 815803- Raspberry Pi terminal to provide the IO, port connection.
- 3.81 posts quality, reliable, convenient, durable.
- Combined with the Proto Shield, the middle can be used as a prototype expansion board.
- Double-sided PCB Prototyping extended area vias connecting the front sides can be welded components.
- The middle section can be placed small bread plate, convenient test extend
SKU: 815803 -
-
-
-
Other 3D Printer Accessories
Sharp Edge Scraper 2 Inches for 3D Printers
SKU: 52264- Stainless steel blade is rustproof and strong.
- The rubber handle is comfortable and will offer a non-slip grip.
- The non-slip handle also features a ribbed thumb rest for ease of use during scraping.
- The rubber handle offers both comfort and a non-slip grip.
SKU: 52264 -
Electronic Switches/Keypads Modules
4×4 Matrix Keypad Membrane Switch for Arduino, ARM and other MCU
Electronic Switches/Keypads Modules4×4 Matrix Keypad Membrane Switch for Arduino, ARM and other MCU
SKU: 12276- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
- Sticker can peel off for adhesive mounting.
- Operating Voltage (V): 12 DC
SKU: 12276 -
-
Arducam Cameras and Accessories
Arducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
Arducam Cameras and AccessoriesArducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
SKU: 869382- Based on IMX477 Sensor
- Optical Format: 1/2.3″ (diagonal 7.857mm)
- Resolution: 4056(H) x 3040(V) 12MP
- Pixel Size: 1.55um x 1.55um
- Lens  Field of View (FOV): 65° (H)
SKU: 869382 -
Arducam Cameras and Accessories
Arducam 12MP IMX477 Pan Tilt Zoom(PTZ) IR-Cut Switchable Camera for Raspberry Pi 4/3B+/3 and Jetson Nano
Arducam Cameras and AccessoriesArducam 12MP IMX477 Pan Tilt Zoom(PTZ) IR-Cut Switchable Camera for Raspberry Pi 4/3B+/3 and Jetson Nano
SKU: 1153923- Resolution: 4056(H) x 3040(V) 12.3MP
- Pixel Size: 1.55 µm x 1.55 µm
- Field of View: 96° – 33° (Horizontal)
- Interface: MIPI
- Platform Support:Â Raspberry Pi/Jetson Nano/Xavier NX
SKU: 1153923 -