Search results: “e-bike pinion” – Page 149
Showing 7105–7152 of 7865 results
-
-
Linear Actuators
Linear Actuator Stroke Length 100MM, 7mm/S, 1500N, 24V
SKU: 905295- Permanent magnet DC motor drive: Voltage 24V DC
- Self Locking Force: 1500N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 905295 -
Digital Voltage, Current and Frequency Meter
Red AC50-500V 0-100A 0- 100Hz 22mm AD16-22AVHz Square LED Voltage Current Hertz 3 In 1 Indicator with transformer
Digital Voltage, Current and Frequency MeterRed AC50-500V 0-100A 0- 100Hz 22mm AD16-22AVHz Square LED Voltage Current Hertz 3 In 1 Indicator with transformer
SKU: 1364610- Easy for installation
- Compact & small in size
- This is a Triple display voltmeter,ammeter & hertz meter
- Good environmental Protections
- Very low Power consumption
SKU: 1364610 -
Digital Voltage, Current and Frequency Meter
White AC20-500V 0-100A 0- 100Hz AD16-22FVAH Square Cover LED Voltage Current Hertz 3 in 1 Indicator
Digital Voltage, Current and Frequency MeterWhite AC20-500V 0-100A 0- 100Hz AD16-22FVAH Square Cover LED Voltage Current Hertz 3 in 1 Indicator
SKU: 1364684- Easy for installation
- Compact & small in size
- This is a 3 in 1 display voltmeter,ammeter, hertz meter
- Good environmental Protections
- Very low Power consumption
SKU: 1364684 -
Other 3D Printer Accessories
EasyMech 16 Pcs Set of 1 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L12 to L30mm
Other 3D Printer AccessoriesEasyMech 16 Pcs Set of 1 mm SS Heat Bed Spacer Compression Spring for 3D Printer OD 7.4mm X ID 5.4mm X L12 to L30mm
SKU: 990628- Material: Stainless Steel
- Outer Diameter (OD): 7.4
- Inner Diameter (ID): 5.4
- Length (MM): 12 to 30 (see Package Includes)
- Quantity: 16
SKU: 990628 -
3D Printer Display and Controller
BIGTREETECH BTT SKR 3 EZ Control Board Mainboard for 3D Printer
SKU: 1604097- Support all versions of our company’s serial screen, SPI screen and LCD screen.
- Upgrade the configuration firmware through an SD card, the operation is simple, convenient and efficient.
- On-board DIAG function pins can be used by simply plugging and unplugging the jumper cap.
- High-performance MOSFETs are used to reduce heat generation.
- Adopt a replaceable fuse for easy replacement.
SKU: 1604097 -
-
3D Printer Extruder Parts and Fans
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
SKU: 11993- Temperature range of use: −40°C to 270°C.
- Dissipation power factor: ≥5 mW/℃ (static in the air).
- 100k Ohm NTC Thermistor.
- NTC Thin Film Thermistor Cable.
- Max power rating: 45 mW
- The hot time constant: ≤7 s(in the air)
SKU: 11993 -
Raspberry Pi Hats
Waveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
Raspberry Pi HatsWaveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
SKU: R101196- LTE Cat-1 HAT for Raspberry Pi enabling 4G and 2G communication.
- Supports TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL protocols.
- Features dial-up, telephone call, SMS capabilities for versatile communication.
- LTE-FDD: B1/B3/B5/B8
- LTE-TDD: B34/B38/B39/B40/B41
- 2G:GSM/GPRS/EDGE: 900/1800 MHz
- SMS:Supported types: MT, MO, CB, Text, PDU
SKU: R101196 -
Signal Generator Module & Oscilloscopes
OWON SDS1052 Digital Storage Oscilloscope : Bandwidth: 50 MHz; 2-Channel; Sample rate: 500MS/s
Signal Generator Module & OscilloscopesOWON SDS1052 Digital Storage Oscilloscope : Bandwidth: 50 MHz; 2-Channel; Sample rate: 500MS/s
SKU: 1861783- Model: SDS1052
- Power Supply(V): 100 – 240 VACRMS
- Impedance (Ω): (At Input) 1 MΩ±2%
- Bandwidth(MHz): 50
- No. of Channels: 2
- Sample Rate: 500MS/s
SKU: 1861783 -
-
-
-
SMD Capacitor
12063D226KAT2A. – KYOCERA AVX – MLCC SMD Capacitor – 22UF, 25V, 1206( Pack of 1)
SKU: 1545198- General Purpose Dielectric for Ceramic Capacitors: EIA Class II Dielectric
- Temperature variation of capacitance is within ±15%from: -55°C to +85°C
- Well-suited for decoupling and filtering applications
- Available in High Capacitance values (up to 100μF)
SKU: 1545198 -
-
-
-
-
-
-
-
-
SMD Capacitor
100uF 16V 2917 SMD Tantalum Capacitor (Pack of 5)
SKU: 871992- Dielectric Material: Tantalum
- Case/Package: 2917 (7343 Metric)
- Number of Pins: 2
- Capacitance: 100 uF
- ESR (Equivalent Series Resistance): 600 mOhm
- Leakage Current: 16 uA
- RoHS: Compliant
- Voltage Rating (DC): 16 V
- Manufacturer Size Code: C
SKU: 871992