The Flight Controller (FC) serves as the brain of the aircraft, equipped with sensors to detect drone movements and user commands. It processes this data to precisely control the motor speed, enabling the drone to maneuver as directed.
Discover a diverse range of Quadcopter Flight Controllers at Robu. Our affordable and high-quality flight controllers are essential for drone enthusiasts. The extensive selection of FCs for FPV drones can be overwhelming, especially for beginners. Leave the task of choosing the right FC to us and enjoy your flight without worries. We are dedicated to providing FCs that continually evolve, becoming more compact, integrating advanced features, and utilizing superior processors and hardware. Trust us for your flight control needs.
Flight Controller & Accessories
Showing 1–48 of 180 results
-
Flight Controller & Accessories
Holybro Pixhawk 6X Pro (FC Model Only)
SKU: R133340- FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM - IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM - On-board sensors:
Accel/Gyro: ADIS16470
±40g, Vibration Isolated, Industrial IMU
Accel/Gyro: IIM-42652
±16g, Vibration Isolated, Industrial IMU
Accel/Gyro: ICM-45686 with BalancedGyroâ„¢ Technology
±32g, Hard Mounted
SKU: R133340 - FMU Processor: STM32H753
-
Flight Controller & Accessories
Holybro Power Distribution Board (PDB) (With XT30 Pre-soldered)
SKU: R133339- Rated Current: 60A
- Max Current: 120A (<60 sec)
- Mounting Holes: 45x45mm
- Connector Options:
- Pre-soldered XT60 for Power Module & Battery
- Optional pre-soldered XT30 for ESC & Motor on X500 V2
SKU: R133339 -
-
-
Flight Controller & Accessories
Jumper T Pro V2 Radio Controller ELRS
SKU: R111226- Multi-Protocol Remote Control, Model Jumper T-Pro
- Internal JP4IN1 Multi-Protocol Module
- 1.3″ OLED screen, 128*64 resolution
- Hall sensor gimbals for high precision and durability
- External NANO interface supports ELRS/CRSF/Tracer
- USB-C internal battery charging, supports 2x 18650 batteries
SKU: R111226 -
Flight Controller & Accessories
Jumper T20 V2 2.4GHz Radio Controller ELRS Version
SKU: R101964- MCU: STM32F407ZGT6
- External Module Interface: Reserved (1.25mm-SP)
- Screen: 1.3″ OLED (128*64)
- External Module Power Supply: XT80 (22A output)
- SD Card: Chip-based internal (officially recommended by EdgeTX)
- Gimbal Size: Standard full-size gimbal
- Voltage: 6-8.4V
- Gimbal Sensors: ROC90 / Hall optional
- Battery: 2pcs 21700
- Power Output: Maximum 1W
- Weight: 448g (battery not included)
SKU: R101964 -
Flight Controller & Accessories
Jumper T14 Radio Controller with CNC Gimbals – ELRS
SKU: R101963- Screen Size: 2.42″ (resolution 128×64)
- Display Method: OLED
- Rocker Stick Size: Standard
- Working Voltage: 6-8.4V
- Battery: Requires 2x 21700 Li-ion batteries (not included)
- Size: 185x175x79mm
- Weight: 4719 grams
SKU: R101963 -
Flight Controller & Accessories
Jumper T20 Gemini Radio Controller
SKU: R111229- Compact, full-featured ELRS GEMINI radio
- Omnidirectional Double Folding Antenna
- 90° placement for superior signal coverage
- Excellent airflow for heat dissipation
- Extensive customization options
- Advanced technology and sleek design
SKU: R111229 -
Flight Controller & Accessories
Jumper T14 Radio Controller with Standard Gimbals – ELRS
SKU: R111228- Screen Size: 2.42″ (resolution 128×64)
- Display Method: OLED
- Rocker Stick Size: Standard
- Working Voltage: 6-8.4V
- Battery: Requires 2x 21700 Li-ion batteries (not included)
- Size: 185x175x79mm
- Weight: 4719 grams
SKU: R111228 -
Flight Controller & Accessories
Holybro Pixhawk 6X-RT (Developer Edition) Standard Set
SKU: R110845- High performance dual core i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
- Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
- Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
- MCU: i.MXRT1176
- Cortex-M7 @ 1GHz
- Cortex-M4 @ 400MHz
- 2MB SRAM
- 64MB Octal SPI Flash
SKU: R110845 -
Flight Controller & Accessories
Holybro Pixhawk 6X RPi CM4 Baseboard With PM03D Power module
SKU: R110846- integrated Components: Pixhawk Flight Controller module and Raspberry Pi CM4 companion computer
- Connection Standards: Pixhawk Connector and Autopilot Bus Standard
- Internal Connection: TELEM2
SKU: R110846 -
-
Flight Controller & Accessories
Holybro Digital Air Speed Pivot Tube Only
SKU: R110851- Type: Digital Air Speed Pitot Tube
- Measurement Range: Accurate over a wide range of airspeeds
- Interface: Digital
- Dimensions: Standard size for easy integration
- Weight: 20 g
- Material: High-quality materials for durability and longevity
SKU: R110851 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT40 Pitot Tube
SKU: R110848- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110848 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT60 Pivot Tube
SKU: R110849- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110849 -
-
-
-
Flight Controller & Accessories
SpeedyBee F405 Mini BLS 35A 20×20 Stack
SKU: R100760- MCU STM32F405
- IMU(Gyro) ICM42688P
- USB Port type Type-C
- Barometer Built-in OSD Chip AT7456E chip
- Power Input 3-6S LiPo.
- The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller.
SKU: R100760 -
Flight Controller & Accessories
SpeedyBee BLS 35A Mini V2 20×20 4-in-1 ESC
SKU: R100762- Firmware: BLHeli S J-H-40
- Continuous Current: 35A * 4
- Burst Current: 45A(5seconds)
- ESC Protocol: DSHOT300/600
- Power Input: 3-65 LiPo
- Power Output: VBAT(Battery voltage, used to power the flight controller)
SKU: R100762 -
-
Flight Controller & Accessories
 Pixhawk 6C (plastic case)
SKU: R100011- Advanced flight controller with PX4 Autopilot.
- STM32H743 processor up to 480 MHz for efficient processing.
- Redundant IMUs for reliability from Bosch & InvenSense.
- An integrated vibration isolation system ensures accurate readings.
- Suitable for academic, commercial, and research applications.
- Cost-effective design with high performance.
SKU: R100011 -
-
-
Flight Controller & Accessories
T Motor MINI F45A 6S 4IN1
SKU: 1800267- Mini body strong performance.
- Reliable & High-Quality MOSFET.
- Safeguard electronic components from vibration impact.
- Input Voltage: 3- 65
- ESC Firmware: BLHeli32
- Telemetry: Support
- galvanometer: Support
- Mounting pitch: 20 x 20mm
- Weight: 9.2g
- beta flight galvanometer ratio: 200
SKU: 1800267 -
Flight Controller & Accessories
Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
SKU: 1777637- Model: Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
- Metal-cased MOSFET
- Smooth control and quick response
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
SKU: 1777637 -
-
-
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
SKU: 1777620- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
- Fast F4 MCU: operating at 150MHz.
- PWM Frequency Range: Supports PWM frequencies ranging from 16k to 96k.
- Metal-Cased MOSFET: metal-cased MOSFET for efficient heat dissipation.
- On-Board Capacitance: on-board capacitance at 2068uF for effective noise filtering, enhancing signal quality.
- 3 oz Copper PCB Design
- Separate Drive & Control Circuit
SKU: 1777620 -
-
Flight Controller & Accessories
Holybro Tekko32 F4 4in1 Mini 50A ESC
SKU: 1777636- Model: Holybro Tekko32 F4 4in1 Mini 50A ESC
- Dimensions: 32 x 40 mm
- Supports DShot 150/300/600/1200/2400.
- Compatible with MultiShot, OneShot, Proshot, PWM, etc.
- ESC telemetry supported for enhanced monitoring.
SKU: 1777636 -
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
SKU: 1777617- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16k to 96k
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120 (V1.9 Version)
SKU: 1777617 -
Flight Controller & Accessories
Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
SKU: 1792279- Model: Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
- High-performance H7 Processor with clock speed up to 480 MHz
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
SKU: 1792279