Flight Controller & Accessories
Showing 145–171 of 171 results
-
Flight Controller & Accessories
Jumper T20 V2 2.4GHz Radio Controller ELRS Version
SKU: R101964- MCU: STM32F407ZGT6
- External Module Interface: Reserved (1.25mm-SP)
- Screen: 1.3″ OLED (128*64)
- External Module Power Supply: XT80 (22A output)
- SD Card: Chip-based internal (officially recommended by EdgeTX)
- Gimbal Size: Standard full-size gimbal
- Voltage: 6-8.4V
- Gimbal Sensors: ROC90 / Hall optional
- Battery: 2pcs 21700
- Power Output: Maximum 1W
- Weight: 448g (battery not included)
SKU: R101964 -
Flight Controller & Accessories
Jumper T14 Radio Controller with CNC Gimbals – ELRS
SKU: R101963- Screen Size: 2.42″ (resolution 128×64)
- Display Method: OLED
- Rocker Stick Size: Standard
- Working Voltage: 6-8.4V
- Battery: Requires 2x 21700 Li-ion batteries (not included)
- Size: 185x175x79mm
- Weight: 4719 grams
SKU: R101963 -
Flight Controller & Accessories
Jumper T20 Gemini Radio Controller
SKU: R111229- Compact, full-featured ELRS GEMINI radio
- Omnidirectional Double Folding Antenna
- 90° placement for superior signal coverage
- Excellent airflow for heat dissipation
- Extensive customization options
- Advanced technology and sleek design
SKU: R111229 -
Flight Controller & Accessories
Holybro Pixhawk 6X-RT (Developer Edition) Standard Set
SKU: R110845- High performance dual core i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
- Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
- Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
- MCU: i.MXRT1176
- Cortex-M7 @ 1GHz
- Cortex-M4 @ 400MHz
- 2MB SRAM
- 64MB Octal SPI Flash
SKU: R110845 -
Flight Controller & Accessories
Holybro Pixhawk 6X RPi CM4 Baseboard With PM03D Power module
SKU: R110846- integrated Components: Pixhawk Flight Controller module and Raspberry Pi CM4 companion computer
- Connection Standards: Pixhawk Connector and Autopilot Bus Standard
- Internal Connection: TELEM2
SKU: R110846 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT40 Pivot Tube
SKU: R110848- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110848 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT60 Pivot Tube
SKU: R110849- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110849 -
-
-
Flight Controller & Accessories
Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
SKU: 1777637- Model: Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
- Metal-cased MOSFET
- Smooth control and quick response
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
SKU: 1777637 -
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
SKU: 1777620- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
- Fast F4 MCU: operating at 150MHz.
- PWM Frequency Range: Supports PWM frequencies ranging from 16k to 96k.
- Metal-Cased MOSFET: metal-cased MOSFET for efficient heat dissipation.
- On-Board Capacitance: on-board capacitance at 2068uF for effective noise filtering, enhancing signal quality.
- 3 oz Copper PCB Design
- Separate Drive & Control Circuit
SKU: 1777620 -
-
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
SKU: 1777617- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16k to 96k
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120 (V1.9 Version)
SKU: 1777617 -
Flight Controller & Accessories
Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
SKU: 1792279- Model: Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
- High-performance H7 Processor with clock speed up to 480 MHz
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
SKU: 1792279 -
Flight Controller & Accessories
CUAV X7+ Pro Flight Controller | Autopilot For PX4 APM Drone Quadcopter Pixhawk Drop Shipping
Flight Controller & AccessoriesCUAV X7+ Pro Flight Controller | Autopilot For PX4 APM Drone Quadcopter Pixhawk Drop Shipping
SKU: 1505165- Main FMU Processor: STM32H743
- Power: 4.5~5.4V
- Weight: 105 g
- 14 PWM outputs (12 support Dshot)
- Support multiple RC inputs (SBUs/CPPM/DSM)
- 2 GPS ports(GPS and UART4 ports)
- 6 i2c buses(Four i2c dedicated ports)
SKU: 1505165 -
-
Flight Controller & Accessories
CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
Flight Controller & AccessoriesCUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
SKU: 1504851- Centimeter-level positioning for industrial UAV
- 10s switch RTK mode
- 20Hz high-frequency RTK navigation refresh rate
- <10s shorter convergence time
- 2 x 9Ps modules serve as a GPS
- PX4 and Ardupilot dual-platform compatible
- Universal Type-C interface adopted on both mobile/ground end, switch freely
SKU: 1504851