FS1000A 433mHz Tx & Rx RF Radio Module

(8 customer reviews)
Availability:

In stock


SKU: 16910
  1. Wide input supply (2.5 V to 12V)
  2. Easy to integrate (V+, GND, and Data)
  3. The device in deep sleep mode when Data pin is grounded
  4. Very small dimension.

 103.00

(inc GST)

₹ 87.29 (+18% GST extra)

In stock

Select below products to add together


New Price: ₹ 103


Prices shown above are Inclusive of GST

Purchase this product now and earn 2 Robu Points!
Category: IR and RF Transmitter and Receivers
Tags: Transmitter, Receiver, 433MHz, Transreceiver

This is FS1000A 433mHz Tx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4.

The transmission occurs at the rate of 1Kbps – 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter.

This low-cost RF transmitter can be used to transmit signals up to 100 meters (the antenna design, working environment, and supply voltage will seriously impact the effective distance). It’s good for a short distance, battery power device development. 433 MHz is the operating frequency for transmitter and receiver pair.


Features :

  1. Wide input supply (2.5 V to 12V)
  2. Easy to integrate (V+, GND, and Data)
  3. The device in deep sleep mode when Data pin is grounded
  4. Very small dimension.

Receiver Module specification

FS1000A 433mHz Receiver -ROBU.IN

Operation voltage: DC5V
Static Current: 4MA
Receiver frequency: 433.92MHZ; 315 Mhz
Sensitivity:-105DB
Dimension:30*14*9mm
External Antenna:32CM signal wire,spiral

 

Transmitter Module Specification

FS1000A 433mHz Transmitter - ROBU.IN

Operating voltage: 3-12V
Operating frequency: 433.92MHz; 315Mhz
Standby current: 0mA
Operating current :20-28mA
Transmission distance:> 500m (open to receiving plate sensitivity at-103dBm distance of more than)
Output Power: 16dBm (40mW)
Transfer rate: <10Kbps
Modulation mode: OOK (Amplitude Modulation)
Operating Temperature: -10 ℃ ~ +70 ℃
Size: 19 × 19 × 8mm


Package Includes :

1 x FS1000A 433mHz Transmitter.

1 x FS1000A 433mHz Receiver.

Transmitter specification

As per below

Operating voltage

3-12V

Operating frequency

433.92MHz; 315Mhz

Operating current

20 – 28 mA

Transmission distance

> 500 m

Output Power

16dBm (40mW)

Transfer rate

<10Kbps

Dimensions (mm)

19 x 19 x 8 (L x W x H)

******************************************

************************************************************************

Operation voltage

DC 5V

Receiver frequency

433.92MHZ; 315 Mhz

Sensitivity

-105DB

External Antenna

32CM signal wire,spiral

Dimensions(mm)

30 x 14 x 9 (L x W x H)

Shipment Weight

0.06 kg

Shipment Dimensions

5 × 5 × 3 cm

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 8 reviews

4.1 overall
2
5
1
0
0

Add a review

  1. saurabh kakade

    how to set a specific reqired range…/

    saurabh kakade

  2. Arpan Pal (verified owner)

    I should give 4 stars because initially when I started using it, the coil antenna inbuilt was enough to transmit and receive data through two 15 inch walls for a total distance of around 12 metres. It was working well. But after an week the receiver got damaged. I don’t think i did any fault in keeping it. I don’t know. Maybe it’s just luck. This product deserves 4 stars.

    Arpan Pal

  3. Arpan Pal (verified owner)

    I should give 4 stars because initially when I started using it, the coil antenna inbuilt was enough to transmit and receive data through two 15 inch walls for a total distance of around 12 metres. It was working just fine. But after an week the receiver got damaged. I don’t think i did any fault in keeping it. I don’t know. Maybe it’s just luck. This product deserves 4 stars.

    Arpan Pal

  4. ykprakash (verified owner)

    Tested n found working. I used examples in VirtualWire library for Arduino. I have not tested the range. There is no need to solder the antenna for testing. It’s enough if one can bring the transmitter closer to the receiver.

    ykprakash

  5. kumbidi

    Working fine…..Good product, delivered at right time…

    kumbidi

  6. Raj

    How to configure it and make it Usable accordingly ?
    I want to Use it as a Switch, please suggest

    Raj

  7. Sameer

    Sir mughe ek RF and ek tx chahi ye

    Sameer

  8. Sameer

    Rx and tx

    Sameer

Questions and answers of the customers

Only registered users are eligible to enter questions

You may also like…