Holybro Pixhawk 6X-RT (Developer Edition) Standard Set

Availability:

In stock


SKU: R110845
  1. High performance dual core  i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
  2. Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
  3. Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
  4. MCU: i.MXRT1176
    • Cortex-M7 @ 1GHz
    • Cortex-M4 @ 400MHz
    • 2MB SRAM
    • 64MB Octal SPI Flash

 33,345.00

(Including GST)

In stock

Purchase this product now and earn 334 Robu Points!

Very Low Stock. Order Now !


Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
6 Months Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: Holybro
Category: Flight Controller & Accessories

The Pixhawk 6X-RT is based on the Pixhawk® FMUv6X-RT Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk 6X-RT flight controller, you can find an NXP-based i.MXRT1176 MCU, paired with sensor technology from Bosch® and InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle.

The i.MXRT1176 microcontroller contains an Arm® Cortex-M7 at 1 GHz and a Cortex-M4 at 400 MHz. It has 2MB SRAM and 64MB Octal SPI Flash. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.

It includes high-performance, low-noise IMUs designed for better stabilization, and has triple redundant IMUs & double redundant barometers on separate buses. When the Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability. An independent LDO powers every sensor set with independent power control. A vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. An integrated Microchip Ethernet PHY, high-speed communication with mission computers via Ethernet is now possible.

The Pixhawk 6X-RT is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application. This Flight controller is compatible with any baseboard that uses the Pixhawk Autopilot bus, such as the Pixhawk Baseboard, Pixhawk Mini Baseboard, and Pixhawk RPi CM4 Baseboard.

Note: 

  1. This developer edition for early adopters while we continue to accumulate flight test hours
  2. This Flight Controller is currently support in PX4 Flight Stack only. (Firmware Target: FMUv6xrt). It is not supported in Ardupilot.
  3. This Flight controller uses digital power module (same as Pixhawk 6X, full list can be found here) Power module comparison chart

Features:

  1. High performance dual core  i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
  2. Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
  3. Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
  4. Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
  5. Vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
  6. Ethernet interface for high-speed mission computer integration
  7. IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
  8. Hardware secure element NXP EdgeLock SE051 an extension to the widely trusted EdgeLock SE050 Plug & Trust secure element family, supports applet updates in the field and delivers proven security certified to CC EAL 6+, with AVA_VAN.5 up to the OS level, for strong protection against the most recent attack scenarios.. E.g to securely store operator ID

Specifications:

  • MCU: i.MXRT1176
    • Cortex-M7 @ 1GHz
    • Cortex-M4 @ 400MHz
    • 2MB SRAM
    • 64MB Octal SPI Flash
  • IO Processor: STM32F103
    • 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
  • On-board sensors
    • Accel/Gyro: BMI088
    • Accel/Gyro: ICM-42670-P
    • Accel/Gyro: ICM-42686-P
    • Mag: BMM150
    • Barometer: 2x BMP388
  • Hardware secure element
    • NXP EdgeLock SE051C2
  • SDHC interface
  • 12-Channel PWM
  • 8x UART
  • 4x I2C
  • 6x SPI
  • 3x CAN-FD
  • RMII 100M Ethernet
  • USB
  • Open-Source Software enablement
    • PX4 Autopilot
    • NuttX RTOS
    • Zephyr RTOS

Package Includes:

1 x Holybro Pixhawk 6X-RT (Developer Edition) Standard Set

1 x Pixhawk Standard Base/Pixhawk Mini Base

1 x PM02D HV Power Module

1 x Cable Set

SKU: R110845 Category:
Shipping Weight 0.300 kg
Shipping Dimensions 16 × 13 × 5 cm
6 Months Warranty

This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Replacement will be done against manufacturing defects.


What voids the warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Holybro Pixhawk 6X-RT (Developer Edition) Standard Set”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China