Generic
Showing 1009–1056 of 6083 results
-
-
Solenoids and Electromagnets
DC24V P30/25 Electric Sucker Electromagnet 15KG
SKU: 879230- Operating Voltage: 24V DC
- Lifting Capacity: 15KG
- Size (D x L): 30 x 25 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 879230 -
Electronic Switches/Keypads Modules
TTP224 4-way Capacitive Touch Switch Module
SKU: 617811- Onboard TTP224 capacitive touch sensor IC 4 keys
- 4 board-level status indicator
- Working voltage: 2.4V-5.5V
- Advanced Pins breakout, so that the output mode and working mode selectable.
- Low power selection
SKU: 617811 -
-
-
-
Solenoids and Electromagnets
DC 12V Solenoid Valve 1/4″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
Solenoids and ElectromagnetsDC 12V Solenoid Valve 1/4″ 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot
SKU: 975725- Valve Type: 2 Way Normally Open
- Port Size: 1/4″ BSP Female Port
- Coil Voltage: DC12V
- Flow Model: Uni-Directional
- Flow Rate: 0.23Cv (Fluid Flow)
- Response Time: Less than 50 ms
- Operating Pressure: 1.2Mpa
SKU: 975725 -
-
Switch Mode Power Supply
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
Switch Mode Power Supply1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Boost converter Module
SKU: 975677- Input voltage: 8 to 60V
- Input Current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
- Quiescent current: 15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current)
- Output voltage: 12 – 97V continuously adjustable
- Output Current: 35A MAX,
SKU: 975677 -
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.8mm (for 3D printer)
SKU: 294116Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 294116 -
FPV Cameras
1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
SKU: 45625- Item Name: 1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera
- Power Consumption: 55mA@ 5v
- Format: NTSC/PAL(Free switch)
- Lens: 2.8mm IR coated FOV: 110°
- With lens cover, well protecting the lens
- With WRD function in the default
SKU: 45625 -
-
-
-
-
Relay Modules
5V 16 Channel Relay Module with Light Coupling LM2596S Power Supply
SKU: 400914- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
SKU: 400914 -
USB Interface Module
CH375B USB Disk Read-write Module USB Flash Disk For Arduino
SKU: 43435- 2×8 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- On board 3.3 V LDO 1117, provides 800 mA current.
- 5 V power supply is powered by the target board.
- 12 MHZ crystal.
SKU: 43435 -
RC Car Wheel
65mm Robot Smart Car Wheel for BO Motors (Red)
SKU: 31485- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Red
SKU: 31485 -
Battery Pack Accessories & Holders
2 x 32650 Battery Holder with 32.35MM Bore Diameter
SKU: 1187458- Model: 32650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 32.35MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187458 -
Raspberry Pi Case
Acrylic Case Suitable for Raspberry Pi4 and 3.5 inch LCD
SKU: 835779- This simple case provides tough protection for your raspberry pi along with 3.5 inch LCD screen
- High-Quality acrylic case
- Click together design, no screws, standoffs, or elastic bands required
- It is easy to use. You just need to click them together
SKU: 835779 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-273 QMC5883L 3 Axis Module Magnetic Field Sensor
SKU: 157027- QMC5883L module (three-axis magnetic field module)
- Model: GY-273
- IC: QMC5883L
- I2C interface
- 1-2 degree heading accuracy
- Integrated 12-bit ADC
- 160Hz max data rate
- A range of -8 to +8 Gauss
SKU: 157027 -
-
Brushed / Brushless DC motor Driver
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
SKU: 699566- Motor Power Range: 4.5V ~ 36V
- Control supply range: 4.5V ~ 9V
- Logical operating current Iss: ≤60mA
- Driving part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W (T = 90 ℃)
- Operating temperature : -25 ℃ ~ + 125 ℃
- Drive Type: Dual high-power H-bridge driver
SKU: 699566 -
-
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.6mm (for 3D printer)
SKU: 294111Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 294111 -
-
Digital Voltage, Current and Frequency Meter
Green Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
Digital Voltage, Current and Frequency MeterGreen Two-Wire 0.56 Inch DC5V-120V DC Digital Display Voltmeter For Car Bicycle Motorcycle
SKU: 1187615- Voltage Measuring Range: 0 to 200 VDC
- It is a 2-wire display.
- LED Color: Green
- Current Consumption: Less than 20mA, generally 5-15mA
- Accuracy: 0.1 V.
- Refresh Speed : Approx 300mS/time.
SKU: 1187615 -
-
-
-