Generic
Showing 1633–1680 of 6080 results
-
Through Hole Capacitor
0.22 F 5.5V DIP Super-Capacitor
SKU: 871984- Type: Super-Capacitor
- Capacitance: 0.22F
- Operating Voltage: 5.5v
- Mounting type: DIP through-hole
- Minimum Operating Temperature: -25°C
- Maximum Operating Temperature: +70°C
- Tolerance: -20% to +80%
- Capacitor Family: Electric Double Layer
- Package/Case Radial
- Pitch: 4.5mm
SKU: 871984 -
-
-
Seven Segment Display
TM1638 Button Digital LED Display Module
SKU: 349827- Use TM1638 digital tube drive chip to drive a common cathode LED digital tube.
- Can be extended to 3 * 8 buttons, led digital tube and can be controlled separately.
- Support 8 brightness control, led digital tube and use the same brightness.
- Support cascading up to 6 of the same module.
- 8 LED, 8-bit digital tube and 8 buttons, common cathode LED digital tube, such as STC microcontroller can be directly connected.
SKU: 349827 -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU: 1121226- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121226 -
-
Pull and Push Rod for Servo
D1.2x840mm Z type Push/Pull Steel Rod for RC Aircraft Aero-Modelling-2Pcs
Pull and Push Rod for ServoD1.2x840mm Z type Push/Pull Steel Rod for RC Aircraft Aero-Modelling-2Pcs
SKU: 453184Push/Pull Steel Rod Wire is steel wire with spring material used to connect RC plane’s Direction flaps to servomotor horn. Z Type Push-Pull Rod, a necessary part for model aeroplane control horn quick adjusting.
SKU: 453184 -
Digital Voltage, Current and Frequency Meter
PZEM-022 100A AC Digital Power Monitor Voltmeter Ammeter Frequency Factor Meter
Digital Voltage, Current and Frequency MeterPZEM-022 100A AC Digital Power Monitor Voltmeter Ammeter Frequency Factor Meter
SKU: 890226- Model: PZEM-022
- Working voltage: 80 ~ 260VAC
- Test voltage: 80 ~ 260VAC
- Current:100A
- Rated power:100A/22000W
- Operating frequency: 45-65Hz
- Measurement accuracy: 1.0 grade
- Size: 9*5*2.5cm/3.5*2*1in
- Wire length:19cm/7.5in
- Weight: Approx.110g/3.9oz
SKU: 890226 -
-
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow) 18mm(OD) * 16mm(ID) * 1000mm(L)
Carbon Fiber Tubes and Rods3K Roll-wrapped Carbon Fibre Tube (Hollow) 18mm(OD) * 16mm(ID) * 1000mm(L)
SKU: 653497- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653497 -
-
-
Voltage Regulator ICs
NCP1117ST33T3G – 3.3V 1A Fixed/Adjustable Positive LDO Regulator 4-Pin SOT-223 (ON semiconductor)
Voltage Regulator ICsNCP1117ST33T3G – 3.3V 1A Fixed/Adjustable Positive LDO Regulator 4-Pin SOT-223 (ON semiconductor)
SKU: 1072504- Mounting Style: SMD/SMT
- Package/Case: SOT-223-3
- Output Voltage: 3.3 V
- Output Current: 1 A
- Number of Outputs: 1 Output
- Polarity: Positive
- Quiescent Current: 10 mA
SKU: 1072504 -
Plastic Push Button Switch
12x12x7.3 mm Round Cap for Square tactile Switch – Red (10 Pcs.)
SKU: 890234- Easy to install, good quality for long time use
- Great replacement for the old or broken buttons cap on the tactile switch
- Fits on a 12 x 12 x 7.3 mm tactile push button switch.
- Contact resistance: 50m Max (initial)
- Insulation resistance: 100 M min DC (250 V)
SKU: 890234 -
-
Carbon Fiber Tubes and Rods
3K Roll-wrapped Carbon Fibre Tube (Hollow)12mm(OD)*10mm(ID)*1000mm(L)
SKU: 653500- Made of Carbon Fiber material
- High Strength
- Stable dimension and UV resistant
- High Corrosion Resistance
- High Thermal Conductivity in some forms
- Low coefficient of thermal expansion
- Non-poisonous
SKU: 653500 -
3D Printer Nozzle
M6 Thread Brass Nozzle V5 V6 UM Compatible – 3mm x 0.5mm (for 3D printer)
SKU: 294109Modify your 3D printer to print fine details or large parts with V6 M6 Thread Brass Nozzle range at robu.in. These nozzles are fully integrated into the ecosystem of 3D printer parts and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers.
SKU: 294109
