Generic
Showing 1969–2016 of 6083 results
-
Temperature & Humidity Sensor
AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module
SKU: 456119- Temperature detection of the two-dimensional area: 8 × 8 (64 pixels).
- Digital output (capability of temperature value output).
- Compact SMD package (adaptively to reflow mounting).
- RoHS compliant.
SKU: 456119 -
Battery Pack Accessories & Holders
4 X 5 18650 Battery Holder with 18.5MM Bore Diameter
SKU: 1187469- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187469 -
Workbench Tools
G1200 1200 x 12MP Multipurpose Digital Electronic Microscope with 7″ LCD Display
SKU: 1165430- 12-Megapixel HD Camera
- Super easy to assemble and de-assemble without any tool
- Micro-USB 5V@2A Power Supply Operated
- SD card slot (supported up to 128 GB Class 10) to Record Video under lense.
- Lense LED light brightness is adjustable with a dimmer button to adjust
- Adjustable stand see wide range of dimensions and angles.
- Supports 1080P video recording
- HDR high dynamic range on/off
- Many more inbuilt modes and useful functions
SKU: 1165430 -
-
Bluetooth and NRF Modules
HC-06 4pin Bluetooth Module (Slave) No Button
SKU: 617844- Bases at CSR BC04 Bluetooth technology.
- with build-in 2.4GHz PCB antenna
- It’s at the Bluetooth class 2 power level.
- Range test: 10 meters
- Operating voltage: 3.3V to 6V DC
- Operating current in pairing is in the range of 30~40mA.
SKU: 617844 -
-
Linear Actuators
Linear Actuator Stroke Length 300MM,7mm/S,1500N,12V
SKU: 618169- Operating Voltage: 12 V
- Self Locking Force: 1500N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 618169 -
-
-
Relay Modules
12V 8 Channel Relay Module
SKU: 618383- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
SKU: 618383 -
Drone Motor
Set of 4 A2212 1000 KV BLDC Brushless DC Motor with SimonK 30A ESC and Orange 1045 Propeller Set
Drone MotorSet of 4 A2212 1000 KV BLDC Brushless DC Motor with SimonK 30A ESC and Orange 1045 Propeller Set
SKU: 5924- Offers great performance and value for money.
- Suitable for airplane, aircraft, quadcopter.
- Motor KV: 1000
- LiPO Batteries: 2S-3S
- Shaft Diameter: 3.17 mm
- ESC used has an On-Board BEC.
- Propeller: Orange HD 1045
SKU: 5924 -
Interfacing Cables
USB Power DC 5V 0.6A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
Interfacing CablesUSB Power DC 5V 0.6A to DC 12V Step Up Module USB Booster Converter Adapter Cable with 2.1×5.5mm DC Plug
SKU: 1165404- Voltage : Input through (USB) DC 5V
- Output via (DC Round Pin) : DC 12V
- Color: BLACK
- Input / Output Current: Maximum Input 0.6
- Easier for installation save time and money
- Easy to use.
SKU: 1165404 -
-
-
-
-
5S Li-ion BMS
5S 40A 18650 Li-ion Lithium Battery Charger Protection Board
SKU: 618351- Charging current: 25A
- Discharging Current: 25A
- Charging voltage: 21V
- Single Cell overcharge protect voltage: 4.23 – 4.28V
- Overcharge Protect Delay: 0.5 – 1.5S
- Single Cell over-discharge protect voltage: 2.72 – 2.88V
- Single Cell over-discharge protect recover voltage: 2.9 – 3.1V
- Overcharge/Discharge Protect Current: 60A
SKU: 618351 -
-
Sensor ICs
INEMO Inertial Module – LSM6DSL/LSM6DSLTR/SF 70S
SKU: 511764- Power consumption: 0.4 mA in combo normal mode and 0.65 mA in combo high-performance mode
- “Always-on” experience with low power consumption for both accelerometer and gyroscope
- Smart FIFO up to 4 kbyte based on features set
- Android M compliant
- ±2/±4/±8/±16 g full scale
- ±125/±250/±500/±1000/±2000 dps full scale
- Analog supply voltage: 1.71 V to 3.6 V
SKU: 511764 -
Audio Amplifier Module
TEA5767 Stereo FM Radio Module with Detachable Antenna
SKU: 410807- Directly plug antenna interface.
- I2C bus communication.
- Multi-capacitor combined filter.
- Blue LED power indicator.
- High sensitivity(low noise RF input amplifier).
- High power auto gains control AGC circuit.
SKU: 410807 -
Signal Generator Module & Oscilloscopes
AD9850 DDS Signal Generator Module
SKU: 399936- 2 sine wave and 2 square wave output.
- AD9850: 0-40MHz.
- After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean.
- Low-pass filter with 70MHz, so the waveform better than SN.
- Parallel and serial data input can be selected via a jumper.
SKU: 399936 -
3D Printer Motor Drivers
DM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
3D Printer Motor DriversDM542 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
SKU: 1165428- Power supply: DC 24-60 (V)
- Current maximum: 4.5A
- Output phase current:1 .5A-4.5A
- Logic input current: 1 0-20mA
- Optical isolation signal input
- Output current DIP switch is adjustable
SKU: 1165428 -
Raspberry Pi Displays
7 Inch LCD Touch Display With Acrylic Case and HDMI Driver Board Kit For Raspberry Pi
Raspberry Pi Displays7 Inch LCD Touch Display With Acrylic Case and HDMI Driver Board Kit For Raspberry Pi
SKU: 976866- The function of plug and play support
- 5V supports DC voltage input, and can also be powered by USB or mobile power supply.
- Truly Interactive – the latest software drivers will support a virtual touchscreen ‘on-screen’ keyboard, so there is no need to plug in a keyboard and mouse.
- Make your own Internet of Things devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
- A range of educational software and programs available on the Raspberry Pi will be touch-enabled, making learning and programming easier on the Raspberry Pi.
SKU: 976866 -
-
Solenoids and Electromagnets
1240-12V DC 12V 1.7A 20.6W 1kg Holding Solenoid for Electric Door Lock
SKU: 313009- Iron Body Material
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Designed with the open frame type and mount board, high power.
- Easy to install for the electric door lock or other automatic door lock systems with the mounting board
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: 313009 -