Generic
Showing 2017–2064 of 6083 results
-
-
-
-
-
Other Proximity Sensor & Modules
PS-3150 High Speed ​​AT10-30 220V 500mA Stable Switch Normally Open Proximity Magnetic Sensor Reed Switch
Other Proximity Sensor & ModulesPS-3150 High Speed ​​AT10-30 220V 500mA Stable Switch Normally Open Proximity Magnetic Sensor Reed Switch
SKU: 975773- Switching power (maximum): 10 W
- DC switching voltage (maximum): 220V
- AC switching voltage, RMS (maximum): 220V
- DC switching current (maximum): 500mA
- AC switching current, RMS (maximum): 500mA
- Breakdown Voltage (Minimum): 250V
- Contact Resistance (initial max): 200mW
SKU: 975773 -
-
-
-
-
-
-
-
-
-
-
Lipo Voltage Checker
18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester
SKU: 699635- Operating Current: less than 70mA.
- Discharge voltage: 1.00V-15.00V 0.01V resolution.
- Termination voltage range: 0.5-11.0V.
- Supported by current: 3.000A 0.001A resolution.
- Maximum voltage measurement error: 1% + 0.02V.
- Maximum current measurement error: 1.5% + – 0.008A.
SKU: 699635 -
Linear Actuators
Linear Actuator Stroke Length 500MM 7mm/S 1000N 12V
SKU: 618171- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1000N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: The drive motor adopts a new carbon brush structure, with a service life of more than 50000 times.
SKU: 618171 -
-
-
Wearable Electronic
WS2812 LilyPad RGB LED Module for Arduino
SKU: 52530LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: 52530 -
3D Printer Nozzle
0.4mm Stainless Steel Nozzle Cleaning Needle for 3D Printer- (Pack of 10 Pcs)
SKU: 1307990- 3D Printer nozzle cleaning needle with a diameter of 0.4mm.
- 1 set includes 5 pieces of 0.4mm size needles.
- For all 0.4mm nozzle (RepRap, Ultimaker, Makerbot, Flashforge, and more).
SKU: 1307990 -
Shield for Arduino
XBee Adapter Shield Breakout Board for XBee Module
SKU: 1150793- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
SKU: 1150793 -
Battery Chargers, Ni-Mh | Li-po | Li-Ion Battery chargers
Supfire Portable Double Groove Battery Charger
Battery Chargers, Ni-Mh | Li-po | Li-Ion Battery chargersSupfire Portable Double Groove Battery Charger
SKU: 699577- Input Voltage: DC 5V
- Output: DC 4.2V 500mA (Max)
- Support multiple type battery charging
- Intelligent anti-reverse protection
- Automatically stop charging when fully charged
- Independent working on each slot with LED indicator
SKU: 699577 -
-
Solenoids and Electromagnets
1240 24V Solenoid Door Lock
SKU: 312543- Holding force: 0.25kg
- Energized forms: intermittent
- Unlocking time: 1S
- Dimensions: 54 x 40 x 28 mm (LxWxH)
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: 312543 -