Generic
Showing 2593–2640 of 7964 results
-
-
Multi-Brand Raspberry Pi Cases
Semi – Transparent Case for Raspberry PI 4B
SKU: 699625- Compatible for All variant of the Raspberry pi 4 Model B
- Easy to assemble without any Screws or Nut-Bolts
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Mounting holes and anti-slip rubber feet at the back.
SKU: 699625 -
-
-
Generic Heat Shrink Sleeve & Spices
6mm Electrical Waterproof Seal Heat Shrink Splice Wire Sleeve White-Yellow 4pcs
Generic Heat Shrink Sleeve & Spices6mm Electrical Waterproof Seal Heat Shrink Splice Wire Sleeve White-Yellow 4pcs
SKU: 471237- Shrinkage ratio: 2:1.
- Tubing: Polyolefin.
- Operating temperature : -55℃ ~ 125℃.
- Minimum shrink temperature: 80℃.
- Starting temperature of solder melt: 138℃.
- Minimum full recovery temperature: 160℃.
SKU: 471237 -
-
Toroidal Inductors
33uH 5A High Current Toroidal DIP Inductor-16mm (OD)
SKU: 1578993- Type: Toroidal
- Material: Core Ferrite
- Inductance: 33µH
- Tolerance: ±20%
- Current Rating (Amps): 5A
- Shielding: Unshielded
- Operating Temperature: -40°C ~ 105°C
- Mounting Type: Through-Hole
- Package/Case: Radial, Vertical (Open)
- Dimensions (D x W): (16.2mm x 7.7mm)
SKU: 1578993 -
Panel Indicator Lights
Red AC/DC220V 22mm AD16-22SM LED Signal Indicator Built-in Buzzer
SKU: 1364623- Model: AD16-22SM
- Easy for installation
- LED Signal Indicator Built-in Buzzer
- Good environmental Protections
- Very low Power consumption
- Available in various sizes, colors, and voltage rating
SKU: 1364623 -
-
Environmental Sensors
4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali（Without Battery）
Environmental Sensors4 in 1 Soil PH Meter Soil Tester PH Moisture Meter Temperature Sunlight Measurement Analysis Acidity Alkali（Without Battery）
SKU: 975696- 4 Different Reading on one Screen
- On-Screen Battery Level Indicator
- Unit change Switch
- 200 mm probe to measure the root level
- Yellow Backlight Screen
- Power sleep mode for long battery life
- Portable and Plug and Play device
SKU: 975696 -
Signal Generator Module & Oscilloscopes
AD9850 DDS Signal Generator Module
SKU: 399936- 2 sine wave and 2 square wave output.
- AD9850: 0-40MHz.
- After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean.
- Low-pass filter with 70MHz, so the waveform better than SN.
- Parallel and serial data input can be selected via a jumper.
SKU: 399936 -
Thermoelectric Peltier Elements
Pro-Range TEC1-12703 40x40mm Industrial Grade Semiconductor Refrigeration Sheet 15.8V3.5A Cooling Capacity 31W
Thermoelectric Peltier ElementsPro-Range TEC1-12703 40x40mm Industrial Grade Semiconductor Refrigeration Sheet 15.8V3.5A Cooling Capacity 31W
SKU: R185732- Model: Pro-Range TEC1-12703
- Cooling Power: 31W (maximum)
- Temperature Differential: 65°C (max)
- Dimensions: 40mm x 40mm x 4.3mm
- Rated Voltage: 15.8V
- Operating Current: 3.5A
SKU: R185732 -
Best Prices
ESP32-C3 Development Board with Soldering
SKU: R183884- Microcontroller: ESP32-C3 with a RISC-V 32-bit single-core processor.
- Connectivity: Supports Wi-Fi (802.11 b/g/n) and Bluetooth 5.0 Low Energy (LE).
- Memory: 4 MB flash memory and 384 KB SRAM.
- Form Factor: Compact and space-efficient design.
- USB Port: USB C-Type for programming and power.
- Operating Voltage: 3.3V.
SKU: R183884 -
-
Shield for Arduino
MINI USB Host Shield 2.0 ADK
SKU: 618157- Only supports 3.3V / 8M / 328 Promini and 3.3V FTDI.
- Mini USB host allows (Pro mini version only) to achieve USB HOST function, also USB HUB function.
- Provided compiled APK installation package and ADK source files compatible with hardware Mega 1280.
- Support For Google Android ADK function
- Support For Android phone type
SKU: 618157 -
Other DC Geared Motors
D Shaft 775 12V 12000 RPM/MIN High Speed High Torque DC Motor Dual Shaft
SKU: 1770442Voltage: 12V DC.
Speed: 12000 RPM for high-speed performance.
Applications: Ideal for robotics, automation, DIY projects, power tools, hobbyist projects, and educational demonstrations.
Reliable Performance.
Versatility: Perfect for projects demanding both speed and torque.
SKU: 1770442 -
Temperature Meter & Controllers
STC-3028 AC110-220 Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
Temperature Meter & ControllersSTC-3028 AC110-220 Dual Display Dual Temperature Adjustable Temperature Controller with 1M Cable
SKU: 1187646- Model: STC-3028
- Optional Voltage: AC110-220
- Temperature Control Range: 0 ~ 100 ° C
- Screen Display: Dual Screen Dual Display
- Sensor: 1 x NTC Sensor (line length is about 1 meter)
SKU: 1187646 -
-
-
Digital Voltage, Current and Frequency Meter
0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-BLUE
Digital Voltage, Current and Frequency Meter0.56inch 0-100V Three Wire LED Display Digital DC Voltmeter-BLUE
SKU: 309478- Operating Voltage: 0-100 VDC
- It is a 3-wire display.
- LED Color: Blue
- Current Consumption : <40 mA.
- Accuracy: 0.1 V.
- Refresh Speed : Approx 200mS/time.
- The display on Voltage: 3 V.(but not measure accurately up to 3.6V).
SKU: 309478 -
IoT and Wireless on Sale, Other ESP WIFI Modules
ESP32-WROVER-B 4M 8Mbit Flash WiFi Bluetooth Module
SKU: 975759- Wifi: 802.11 b/g/n (802.11n up to 150 Mbps)
- Frequency range 2.4 GHz ~ 2.5 GHz
- Bluetooth: v4.2 BR/EDR and BLE
- Radio: NZIF receiver with –97 dBm sensitivity, Class-1, class-2, and class-3 transmitter, AFH
- Audio: CVSD and SBC
- On-chip sensor: Hall sensor
- Integrated SPI flash: 4 MB
- Integrated PSRAM: 8 MB
SKU: 975759 -
-
DC Jacks
Green JS-910B 4mm Banana Socket Jack
SKU: 1794366-
Central threaded metal rod
-
Cap with plastic insulation and color-coded for easy identification
-
Made of high-quality brass with a surface coated with nickel
-
Insulated for safety during use
-
Current rating of 36A
-
Voltage rating of 30VAC-60VAC
SKU: 1794366 -
-
