Search results: “e-bike pinion” – Page 146
Showing 6961–7008 of 9325 results
-
-
Official Raspberry Pi Accessories
Official Raspberry Pi 3 Case of Raspberry Pi 3 Model B and B+ (Red-White)
Official Raspberry Pi AccessoriesOfficial Raspberry Pi 3 Case of Raspberry Pi 3 Model B and B+ (Red-White)
SKU: 128303- High-quality ABS construction
- Available in both red/white and black/grey
- Removable side panels and lid for easy access to GPIO, camera and display connectors
- Light pipes for power and activity LEDs
- Extraordinarily handsome
SKU: 128303 -
Temperature Meter
HTC-1 High Precision Large Screen Electronic Indoor Temperature, Humidity Thermometer with Clock Alarm
Temperature MeterHTC-1 High Precision Large Screen Electronic Indoor Temperature, Humidity Thermometer with Clock Alarm
SKU: 305978- Large LCD display shows big Digital Numbers
- Temperature, Humidity and Time can be seen simultaneously.
- It has Stand to use as table-top or Hook for placing on the wall.
- Integral-hour alarm function
- Time, Date & Month display
- Low Power Consumption
SKU: 305978 -
-
-
Tactile Switches, Microswitch Switches
Tact Switch-TK-024-2*4
SKU: 1883722- MPN: TK-024
- Contact Rating:50mA, 12V DC
- Contact Resistance:100mΩ max.
- InsulationResistance:100MΩ min. 100V DC
- Dielectric Strength:100V AC/1 minute
- Operating Force :160,260±50gf
- Travel :0.20 ± 0.1mm
- Operating Life:100,000 Cycles Min.
SKU: 1883722 -
Solenoids and Electromagnets
DC12V 1/4” 3 Way 2 Position Pneumatic Solenoid Valve for Water Air Gas
SKU: 975722- Model: 3V210-08
- Biggest Withstanding Pressure: 12kgf/c㎡
- Working Medium: Air(40 micron cleaned)
- Power Consumption: DC12V, 2.5W
- Motion Pattern: Internal Pilot
- Protection Class: IP65(DIN40050)
SKU: 975722 -
Battery Pack Accessories & Holders
3 x 21700 Battery Holder with 21.75MM Bore Diameter
SKU: 1187463- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.75MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187463 -
Lead Screw and Nut
400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
Lead Screw and Nut400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut
SKU: 12043- Lead Screw Material: 304 Stainless Steel.
- Length: 400mm.
- Diameter: 8mm.
- 4 Start Lead Screw
- Brass Nut Size: 10 x 13 x 22 mm.
- Mainly use for Stepping motor driving guide rail.
- T shape design, made of high-quality stainless steel material.
- Easy to install and convenient to use.
SKU: 12043 -
Relay Modules
433MHz 12V 1 Channel Relay Module Wireless Remote Control Switch without Battery
SKU: 1150682- Operating voltage: DC 5V
- Operating temperature: -40~80 degrees
- Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
- Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
SKU: 1150682 -
Relay Modules
433MHz 5V 1 Channel Relay Module Wireless Remote Control Switch without Battery
SKU: 1150684- Operating voltage: DC 5V
- Operating temperature: -40~80 degrees
- Operating frequency: 433MHZ Receive sensitivity: ≥-95dB
- Working Mode: jump switch, point action, self-locking, and interlocking(adjustable)
SKU: 1150684 -
DIY Hobby Project Parts
DIY 14 in 1 Educational Solar Transformers Robot Kit Toy
SKU: 781361- Powered by the sun – no batteries required.
- Two levels of building skill levels so the beginner and experienced robot builder will be equally engaged.
- All parts snap together – no tools needed!
- Excellent addition to a home-school curriculum
- Build land bots and water bots.
SKU: 781361 -
-
-
Relay Modules
433MHz 12V 4 Channel, Relay Module Wireless, Remote Control Switch, without Battery
SKU: 1121246- Working Mode: Output selectable between Latching and Non Latching types
- Relay Board Operating voltage: DC24V
- Working current: 50 ~ 200mA
- the operating frequency: 433MHz
- Application: 4 x AC 230V up to 10A
SKU: 1121246 -
L-Type DC BO Motors
300 RPM L-Shape BO Motor
SKU: 103957- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
SKU: 103957 -
-
Digital Voltage, Current and Frequency Meter
White AC50-500V 0-100A 22mm AD16-22FVA Square Cover LED Voltage and Current Dual Display Indicator Light with Transformer
Digital Voltage, Current and Frequency MeterWhite AC50-500V 0-100A 22mm AD16-22FVA Square Cover LED Voltage and Current Dual Display Indicator Light with Transformer
SKU: 1364686- Easy for installation
- Compact & small in size
- This is Dual display voltmeter and ammeter
- Good environmental Protections
- Very low Power consumption
SKU: 1364686 -
Flight Controller & Accessories
Jumper T Pro V2 Radio Controller ELRS
SKU: R111226- Multi-Protocol Remote Control, Model Jumper T-Pro
- Internal JP4IN1 Multi-Protocol Module
- 1.3″ OLED screen, 128*64 resolution
- Hall sensor gimbals for high precision and durability
- External NANO interface supports ELRS/CRSF/Tracer
- USB-C internal battery charging, supports 2x 18650 batteries
SKU: R111226 -
Relay Modules
5V 1 Channel Without Light Coupling Relay
SKU: 618455- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
SKU: 618455 -
Raspberry Pi Displays
7 Inch LCD Touch Display With HDMI Driver Board Kit For Raspberry Pi
SKU: 76643- The function of plug and play support
- 5V supports DC voltage input, and can also be powered by USB or mobile power supply.
- Truly Interactive – the latest software drivers will support a virtual touchscreen ‘on-screen’ keyboard, so there is no need to plug in a keyboard and mouse.
- Make your own Internet of Things devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
- A range of educational software and programs available on the Raspberry Pi will be touch-enabled, making learning and programming easier on the Raspberry Pi.
SKU: 76643 -
-
-
-
USB Interface Module
Waveshare 2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module
USB Interface ModuleWaveshare 2-CH UART To Ethernet Converter, Serial Port Transparent Transmission Module
SKU: 1113350- M0 series 32-bit ARM processor
- Operating Mode:TCP/UDP
- UART TTL LEVEL 3.3V / 5V compatible
- Supported protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
- Support DHCP, DNS, AUTO MDI/MDIX, User-defined MAC address
- Provide(socket), VB, C++, Delphi, Android, IO
SKU: 1113350 -
HMI LCD Display
Elecrow RC070 7 inch 1024*600 LCD Display with Touch Screen Without Acrylic Case
SKU: R101641- Appearance Size: 16412414.4mm
- Screen Size: 155*88.5mm
- Resolution: 1024×600
- Touch Screen: Capacitive touch screen
- Compatibility: Raspberry Pi (Raspbian, Ubuntu), Windows 10/8.1/8/7, BB Black, BeagleBone
SKU: R101641