Search results: “motor” – Page 4
Showing 145–192 of 1355 results
-
-
Straight Type DC BO Motors
110 RPM Half Metal Gear BO Motor – Straight
SKU: 766342- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 110 RPM
- Rated Torque: 1 Kgcm
SKU: 766342 -
-
-
-
-
Cytron Motor Drivers
Cytron Smart Drive Mdds30 Dual 30A (80A Peak)
SKU: 29672- Battery low voltage indicator.
- Battery over voltage indicator.
- Thermal protection.
- Current limit protection.
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Dimension: 103 x 97 x 40 (LxWxH) mm.
SKU: 29672 -
-
-
Cytron Motor Drivers
Cytron MDD10A Dual Channel Enhanced 10Amp DC Motor Driver 30A Peak
SKU: 3405- Bi-directional control of 2 brushed DC motor.
- Support motor voltage ranges from 5V to 25V.
- Maximum current up to 10A continuous and 30A peak (10 seconds) for each channel.
- Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
SKU: 3405 -
-
N20 Metal Gear Motors
N20-3V-500 RPM Micro Metal Gear-box DC Motor
SKU: 475607- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475607 -
-
3D Printer Stepper Motors, Nema 23 Stepper Motors
JK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
3D Printer Stepper Motors, Nema 23 Stepper MotorsJK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
SKU: 770762- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: 770762 -
Drone Motor
Dys D3536-5 1450KV Bldc Motor
SKU: 1115427- Battery: 2~4 Cell /7.4~14.8V
- RPM: 1450kv
- Max current: 45A
- No-load current: 3.5A
- Max power: 655W
- Internal resistance: 0.023 ohm
- Weight: 102g (including connectors)
- Diameter of shaft: 5mm
- Dimensions: 35x36m
- Prop size: 7.4V/9×6 14.8V/8×4
- Max thrust: 1380g
- Pole Count:Â 12
SKU: 1115427 -
Servo Motor Drivers
USB 32Ch Servo Motor Controller Board support PS2 WIFI with USB Cable
SKU: 494926- Baud rate (USB): 115200
- Baud rate (bluetooth, UART): 9600
- Storage Flash capacity: 16M
- Mode to choose: 4 types
- Simultaneous controlling servo number: 32 channel
- Max action groups: 256 groups
- Communication agreement: UART
- Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
SKU: 494926 -
Straight Type DC BO Motors
300 RPM Dual Shaft BO Motor-Straight
SKU: 104024- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 300 RPM
- Rated Torque: 0.35 Kgcm
SKU: 104024 -
-
N20 Metal Gear Motors
N20 Micro Gear 12V 100RPM DC Motor (High Torque)
SKU: 17635- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 17635 -
N20 Metal Gear Motors
N20-6V-30 RPM Micro Metal Gear-box DC Motor
SKU: 470837- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 470837 -
-
-
-
Drone Motor
DYS D3548-6 790 KV BLDC Motor
SKU: 1115431- Battery: 3~5 Cell /11.1~18.5V
- RPM: 790kv
- Max current: 40A
- No load current: 1.8A
- Max power: 715W
- Internal resistance: 0.040 ohm
- Weight: 159g (including connectors)
- Diameter of shaft: 5mm
- Dimensions: 35x48m
- Prop size: 11.1V/12×12 18.5V/11×7
- Max thrust: 1650g
SKU: 1115431 -
N20 Metal Gear Motors
N20-3V-15 RPM Micro Metal Gear-box DC Motor
SKU: 475044- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475044 -
-
-
Best Prices, Stepper Motor Drivers
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
-22%Best Prices, Stepper Motor DriversTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
SKU: 43211- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10~45℃
- H bridge bipolar constant current drive.
SKU: 43211 -
Straight Type DC BO Motors
60 RPM Dual Shaft BO Motor – Straight
SKU: R112945- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 0.35 Kgcm
SKU: R112945