Search results: “hc-sr501” – Page 64
Showing 3025–3072 of 3195 results
-
-
-
-
LORA Module
Waveshare RP2040-LoRa Development Board, Integrates SX1262 RF Chip Low Frequency USB Type-C adapter board + FPC cable Included
LORA ModuleWaveshare RP2040-LoRa Development Board, Integrates SX1262 RF Chip Low Frequency USB Type-C adapter board + FPC cable Included
SKU: R101210- High-performance LoRa development board using SX1262 RF chip.
- Dual-core RP2040 microcontroller chip by Raspberry Pi.
- Supports LF/HF frequency bands with optional configuration.
- USB Type-C connectivity via adapter board for convenience.
- Offers up to 20 multi-function GPIO pins for versatile use.
- Features FSK, GFSK, and LoRa modulation for reliable long-range communication.
SKU: R101210 -
-
Official Raspberry Pi Kits
Waveshare Raspberry Pi Zero POD Kit C (HDMI USB HUB Module + Zero POD Case + 2.8inch LCD Module + Lan Module)
Official Raspberry Pi KitsWaveshare Raspberry Pi Zero POD Kit C (HDMI USB HUB Module + Zero POD Case + 2.8inch LCD Module + Lan Module)
SKU: 1552789- Zero POD case: Three-part structure design (aluminum alloy case + ABS top and bottom covers) and is also suitable for other Zero series boards.
- Zero POD HDMI USB HUB Module: Expands 2x USB2.0 port, converts Mini HDMI port to standard HDMI port
- 2.8-inch LCD module: Onboard 240×320 resolution LCD resistive touch screen with 4x user buttons
- POD USB LAN Module: Expands 1-ch network port and 4-ch USB2.0 Type-A port via 12PIN header
SKU: 1552789 -
Raspberry Pi Hats
Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
Raspberry Pi HatsWaveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
SKU: 1254993- LTE Cat-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
- 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
- 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
- GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication
SKU: 1254993 -
TFT LCD Displays
Waveshare 7inch Capacitive Touch Screen LCD (C) with Bicolor Case, 1024×600, HDMI, IPS, Low Power
TFT LCD DisplaysWaveshare 7inch Capacitive Touch Screen LCD (C) with Bicolor Case, 1024×600, HDMI, IPS, Low Power
SKU: 1113359- Resolution:1024 x 600
- Display Port: HDMI
- Touch Type: Capacitive
- Touch Points:5 points
- 7-inch IPS screen with a hardware resolution of 1024×600.
- 5-points capacitive touch control.
- Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
SKU: 1113359 -
Thermal Cameras
BOSCH GTC 400 C -Thermal Camera
SKU: 1532207- Measuring application: Thermal image
- Battery voltage: 12
- Measurement range: -10 °C to +400 °C
- Measuring the accuracy of IR: ± 3.0 °C* (*plus use-dependent deviation)
- Data transfer: MicroUSB, Wi-Fi
- Thermal sensitivity (NETD): <50 mK
- Resolution: 0.1 °C
SKU: 1532207 -
-
-
PIR / IR and Optical Sensor
Omron D6T-1A-02 IR Sensor, -40 To 80Deg C, 5.5Vdc
SKU: 1373971- Product: D6T-1A-02 IR SENSOR, -40 TO 80DEG C, 5.5VDC
- Power supply voltage: 4.5 to 5.5 VDC
- Storage temperature range: -40 to 80°C
- Operating temperature range: -40 to 80°C
- Storage humidity range: 95% max.
SKU: 1373971 -
-
Temperature & Humidity Sensor
TE CONNECTIVITY Infrared Temperature Sensor, Thermopile, Digital, 0°C to 100°C, I2C Interface, TO-5
Temperature & Humidity SensorTE CONNECTIVITY Infrared Temperature Sensor, Thermopile, Digital, 0°C to 100°C, I2C Interface, TO-5
SKU: 1373978- Product: Infrared Temperature Sensor, Thermopile, Digital, 0°C to 100°C
- Humidity: non-condensing
- Small size
- Up to ±1°C accuracy
- I2C Interface
- Low current consumption
SKU: 1373978 -
-
IoT Development Boards
WeAct Studio ESP32 Development Board TYPE-C CH340K WiFi+Bluetooth Dual Core ESP32-DOWD-V3
IoT Development BoardsWeAct Studio ESP32 Development Board TYPE-C CH340K WiFi+Bluetooth Dual Core ESP32-DOWD-V3
SKU: R110795- Chip: ESP32
- Wireless Connectivity: 2.4GHz Wi-Fi, Bluetooth dual-mode
- Manufacturing Process: TSMC 40nm low-power process
- Application Compatibility: Versatile, suitable for various application scenarios.
SKU: R110795 -
Boards Compatible with Arduino
Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
Boards Compatible with ArduinoUnsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C with WhiteType-C Cable 30cm
SKU: 1150789- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
SKU: 1150789 -
IoT Development Boards
Waveshare RP2040-BLE Development Board, Raspberry Pi Microcontroller Development Board, Based On RP2040, Supports Bluetooth 5.1 Dual Mode USB Type-C adapter board + FPC cable Included
IoT Development BoardsWaveshare RP2040-BLE Development Board, Raspberry Pi Microcontroller Development Board, Based On RP2040, Supports Bluetooth 5.1 Dual Mode USB Type-C adapter board + FPC cable Included
SKU: R101188- Microcontroller: RP2040 designed by Raspberry Pi
- Processor: Dual-core Arm Cortex M0+ running up to 133 MHz
- Memory: 264KB of SRAM, 2MB of onboard Flash memory
- Bluetooth: Supports Bluetooth 5.1 dual mode function
SKU: R101188 -
PIR / IR and Optical Sensor
Seeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
PIR / IR and Optical SensorSeeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
SKU: 1770546- Infrared camera sensor: PAG7646J1
- Onboard LED fill light: AU3838A-ZRR-1000mA
- Power supply: 3.3v/5v
- Detection range: 5 to 40cm
SKU: 1770546 -
Battery Charging Boards
Seeed Studio Lipo Rider Plus (Charger/Booster) – 5V/2.4A USB Type C
SKU: 1670436- Support for shutdown output (IO control/manual switch)
- Onboard charge status indicator LED + Onboard 4-segment power indicator LED
- Ultra-small 2.5cm*4.1cm
- Single-layer layout easy mount.
SKU: 1670436 -
Smart Vision Cameras
1000X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
Smart Vision Cameras1000X 3 in 1 USB Digital Microscope Camera Endoscope 8LED Magnifier with Stand 3-in-1 Type-c Electronic Magnifier Endoscope
SKU: 1150645- Specification: Magnification: 1000X
- Light source: 8 LED lights
- Resolution: 1920×1080, 640*480
- Pixel: 30W
- Focal length: 3-40mm manual adjustment
- Support Android 4.2 or above/widows/Mac system
SKU: 1150645 -
Nitecore Charger
Nitecore Ci2 Intelligent USB-C Dual-Slot Superb Battery Charger
SKU: 1568845- Fast Charge Mode: 3,000mA*1 (MAX), 1,500mA*2 (MAX)
- Standard Mode: 2.000mA*1 (MAX), 1,000mA*2 (MAX)
- Intelligent USB-C Dual-slot superb charger
- QC and PD input available
- Capable of charging 2 batteries simultaneously and controlling each slot independently
- Up to 3,000mA charging speed in a single slot
- Compatible with Li-ion and Ni-MH / Ni-Cd batteries with automatic detection
SKU: 1568845 -
-
-
-
Dimension Engineering Motor Drivers
Sabertooth Dual 5A Motor Driver for R/C
SKU: 4689- Operating Voltage(VDC): 6-18
- Peak Current (A): 10
- Continuous Current (A): 5
- No. of Channels: 2
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
SKU: 4689 -
Official Raspberry Pi Accessories
Micro USB-B (Female) to USB Type C (Male) Converter Adapter for Raspberry Pi 4-White
Official Raspberry Pi AccessoriesMicro USB-B (Female) to USB Type C (Male) Converter Adapter for Raspberry Pi 4-White
SKU: 1240981- Can be used for All development Board with C type port for 5V@3A supply
- Supports Reversible plug orientation
- Simple Plug and Play device, no driver software required.
- Supports High-speed data transfers
- Can be Use for Mobile and Tablets with Fast Charging support
- Compact and Light Weight
SKU: 1240981 -
-
USB Interface Module
Waveshare CP2102 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
USB Interface ModuleWaveshare CP2102 USB UART Board (Type C), USB To UART (TTL) Communication Module, USB-C Connector
SKU: 1094950- Supports Mac OS, Linux, Android, WinCE, Windows 7/8/10/11…
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3x LED indicators: TXD LED, RDX LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
SKU: 1094950 -
IoT Development Boards
TTGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
IoT Development BoardsTTGO SIM7600E-H Module ESP32- WROVER-E Chip WiFi Bluetooth 18560 Battery Holder Solar Charge Development Board Unsoldered
SKU: 1031136- Main chip:ESP32 WROVER-E
- Interface: USB, SD Card, Solar Input interface
- Car Clock:40MHz
- Button: Reset, Power switch
- Antenna: SIM Antenna，GPS Antenna
- Operating Temperature Range:-40-85 degrees
SKU: 1031136 -
TFT LCD Displays
Waveshare 3.2inch HDMI IPS LCD Display (H), 480×800, Adjustable Brightness, No Touch
TFT LCD DisplaysWaveshare 3.2inch HDMI IPS LCD Display (H), 480×800, Adjustable Brightness, No Touch
SKU: 1113351- 480×800 hardware resolution
- Provide driver. (support RaspbianUbuntuKali and Retropie system).
- When only used for display, does not occupy any I/O resources.
- Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
- Supports HDMI audio output.
SKU: 1113351 -
Solar Panels and Controllers
Waveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
Solar Panels and ControllersWaveshare Solar Power Manager (C) Supports 3x 18650 Batteries Multi Protection Circuits
SKU: 1144684- Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Flexible battery recharging: from the solar panel as well as USB TYPE-C power adapter
- Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
- Heavy Aluminium body with a stylish finish and Multi status LEDs
- Batteries can be easily replaced by removing the cover.
SKU: 1144684
