Motors | Drivers | Pumps | Actuators
Showing 1297–1344 of 1626 results
-
Nema 16 Stepper Motors
NEMA16 39HY38-0504 2.9Kg-cm Stepper Motor Round-Type Shaft
SKU: 1551704- Number of Phase: 2
- Step Angle: 1.8°
- Rated Voltage (V): 1.2
- Rated Current(A): 0.5A/phase
- Resistance (Ω): 24 Ω ± 10%/Phase
- Inductance (mH/Phase): 45 mH± 20%
- Shaft Diameter (mm): 5
- Holding Torque: 2.9 kg.cm
SKU: 1551704 -
3D Printer Stepper Motors, Nema 23 Stepper Motors
57HM76-2804 NEMA 23 18Kg-cm Stepper Motor Round-Type
3D Printer Stepper Motors, Nema 23 Stepper Motors57HM76-2804 NEMA 23 18Kg-cm Stepper Motor Round-Type
SKU: 1551725- Model: 57HM76-2804
- Shaft Type: Round-Type
- Motor Body Length: 76mm
- Step Angle: 0.9°
- Current/Phase: 2.8A
- Resistance (Ω) /Phase: 1.15
- Inductance (mH/Phase): 5.6
- Holding Torque (kg-cm): 18
- No. of Leads: 4
SKU: 1551725 -
Pololu Motor Drivers
Pololu MAX14870 Single Brushed DC Motor Driver Carrier
SKU: 1607674- No separate logic supply needed; inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Carrier board adds reverse-voltage protection
- Compact size (0.6″×0.5″)
SKU: 1607674 -
-
-
Pneumatic Connectors and Valves
BSL – 04 (1/2″ BSP (M) Brass Air Silencer)
SKU: 1513048- Male Thread Size: PT, R, BSPT 1/2
- Fluid Admitted: Compressed Air
- Working Pressure: 0~1.0MPa | 0~150psi
- Proof Pressure: 3.0Mpa | 435psi
- Working Temperature: -10~80°C | 14~176°F
- Body(noise absorbing material): Sintered Bronze
SKU: 1513048 -
-
-
-
Kamoer LAB Pumps
KCP200-B16 Kamoer Lab Pump KCP200 – B16 -100~200ml/min | BPT tube 3.2*6.4mm
SKU: 1169102- Model: KCP200-B16-DC motor
- Power Requirements: Input AC 100-240V 50-60Hz 0.36Max output DC 12V1A
- Working Condition: Temperature: 0-50ºC humidity: 10%-90%(non -condensing)
- Power Rating: 12w
- Display: Break Code Screen
- Backlight mode: Standard Auto off
- Transferring ink in the printer
- Water transfer from the aquarium
SKU: 1169102 -
-
-
-
-
-
Stepper Motor Drivers
Nema17/23 Stepper Motor Driver MKS OSC PWM Pulse Signal Generator Module Motor Speed Frequency Direction Control Regulator
Stepper Motor DriversNema17/23 Stepper Motor Driver MKS OSC PWM Pulse Signal Generator Module Motor Speed Frequency Direction Control Regulator
SKU: 1645768- Signal type: PWM/ Pulse
- Frequency range: high 5.4k-160khz, medium 540-16.6khz and low 80-2.4khz
- Direction: clockwise / counterclockwise
- Voltage: 8v-24v
- Color: black
- Material: PC + metal
- Dimensions: 58×38.6mm
SKU: 1645768 -
-
Hitec Servo Motors
HiTec HS-5087MH HV Premium Digital Metal Gear Micro Servo
SKU: 1559761- Smallest 7.4v 2-Cell LiPo Capable Servo
- Rugged Metal Gears
- Ball Bearing-Supported Output Shaft
- Standard Programmable Digital Circuit for More Holding Power
- Standard Servo Performance in a Micro Package
SKU: 1559761 -
-
-
-
-
-
-
-
-
-
-
Stepper Motor Drivers
MKS-LV8729-OC 1.5A Ultra Quiet Stepper Motor Driver for 3D Printers and CNC
SKU: 815856- High-speed optocoupler, high-speed without losing a step
- LV8729 chip, with over-current protection circuit, the maximum support 128 segments
- Automatic half-flow function
- A variety of input methods to meet a variety of interface needs
- The use of increased heat sink, good heat dissipation
SKU: 815856 -
Orange 12V Square Gear Box Motor
Orange MG555 12V 240RPM Square Gearbox DC motor For DIY Project Encoder Compatible
Orange 12V Square Gear Box MotorOrange MG555 12V 240RPM Square Gearbox DC motor For DIY Project Encoder Compatible
SKU: 776682- Rated current (mA): ≤3000.
- Rated power (W): 13.340.
- Rated Torque (N-cm): 63.9
- Rated speed: 230 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 6000.
- Back shaft for Encoder Available
SKU: 776682 -