Motors | Drivers | Pumps | Actuators
Showing 145–192 of 1625 results
-
Stepper Motor Drivers
TMC2208 Stepper Motor Driver Module
SKU: 699623- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: 699623 -
Kamoer Peristaltic Pump
Kamoer 12V 540ml/min Silicon Tube brush motor 3 rollers liquid peristaltic pump
Kamoer Peristaltic PumpKamoer 12V 540ml/min Silicon Tube brush motor 3 rollers liquid peristaltic pump
SKU: 1005095- Model : KHM-SW3S40
- Thick-walled tubing
- Low noise level
- Suitable for viscous, non-viscous liquid transmission
- Capable of transferring liquid-containing particles
- Thicker tubing wall to withstand higher pressure
- Longer service life with resilient tubing
SKU: 1005095 -
-
Solenoids and Electromagnets
DC 12V KK-P50/30 60KG Lifting Solenoid Electromagnet
SKU: 130285- Operating Voltage: 12V DC
- Lifting Capacity: 60KG
- Size (D x L): 50 x 30 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 130285 -
Orange 12V Johnson Geared Motor
Orange 12V 5 RPM Johnson Geared DC Motor – Grade A Quality Encoder Compatible
Orange 12V Johnson Geared MotorOrange 12V 5 RPM Johnson Geared DC Motor – Grade A Quality Encoder Compatible
SKU: 611379- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 472.6 N-cm
- Stall Torque: 2250 N-cm
- Gearbox Dimensions: 29×37 (LxW) mm
- Back shaft for Encoder Available
SKU: 611379 -
-
-
JR Servo cable
SafeConnect Twisted 30CM 22AWG Servo Lead Extension (JR) Cable
SKU: 250526- High-Quality cable
- One male and one female connector.
- Twisted 30cm Servo Lead Extention (JR) with hook
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 250526 -
Straight Type DC BO Motors
110 RPM Half Metal Gear BO Motor – Straight
SKU: 766342- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 110 RPM
- Rated Torque: 1 Kgcm
SKU: 766342 -
-
N20 Metal Gear Motors
N20-6V-30 RPM Micro Metal Gear-box DC Motor
SKU: 470837- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 470837 -
JR Servo cable
SafeConnect Twisted 100cm 22AWG Servo Lead Extention (JR) with Hook-1Pcs.
SKU: 103633This SafeConnect Twisted 100 CM 22AWG Servo Lead (JR) Extension Cable with Hook is stronger & allow more current than standard servo wires. A tradeoff is they are slightly heavier. Great for larger planes with servos that experience high loads.
SKU: 103633 -
-
-
Stepper Motor Drivers
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
Stepper Motor DriversTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
SKU: 835839- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10~45℃
- H bridge bipolar constant current drive.
SKU: 835839 -
-
Orange 12V Johnson Geared Motor
Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
Orange 12V Johnson Geared MotorOrange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
SKU: 5721- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 328.3 N-cm
- Stall Torque: 1500 N-cm
- Gearbox Dimensions: 29×37 (LxW) mm
- Back shaft for Encoder Available
SKU: 5721 -
Stepper Motor Drivers
A4988 Stepper Motor Driver Controller Board- RED
SKU: 699614- Compact size, easy to install and use.
- All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
- E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
SKU: 699614 -
Plastic Gear Box Motor
DC Motor – 100RPM – 12Volts
SKU: 5673- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 2.9
- Stall Torque(kg-cm): 11.4
SKU: 5673 -
Linear Actuators
Linear Actuator Stroke Length 100MM,7mm/S,1500N,12V
SKU: 618167- Permanent magnet DC motor drive: Voltage 12VDC
- Self Locking Force: 1500N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 618167 -
Solenoids and Electromagnets
DC 12V KK-P30/25 15KG Lifting Solenoid Electromagnet
SKU: 130281- Operating Voltage: 12V DC
- Lifting Capacity: 15KG
- Size (D x L): 30 x 25 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 130281 -
-
Brushed / Brushless DC motor Driver
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
SKU: 28546- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 34 mΩ
- Maximum PWM frequency: 10 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: 28546 -
JR Servo cable
SafeConnect Twisted 15CM 22AWG Servo Lead Extension (JR) Cable with Self Locking Hook
SKU: 1073236- High-Quality cable
- One male and one female connector.
- Twisted 15 cm Servo Lead Extention (JR)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 1073236 -
Solenoids and Electromagnets
DC 24V P50/30 60KG Lifting Solenoid Electromagnet
SKU: 890212- Operating Voltage: 24V DC
- Lifting Capacity: 60KG
- Size (D x L): 50 x 30 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 890212 -
Other Servo Accessories
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
SKU: 14950- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
SKU: 14950 -
-
Cooling Fans
Sunon 4020 12VDC 1.06W Cooling Fan
SKU: 870203- Operating Voltage: 12VDC
- Power Consumption: 1.06W
- Body and Blade Constructed from Thermoplastic PBT of UL 94V-0
- Single Phase 4 Pole Brushless DC Motor
- Precise Vapo Bearing
- Counterclockwise Rotation Direction if Viewed from front of Fan Blade
SKU: 870203 -
Solenoids and Electromagnets
DC 24V KK-P25/20 8KG Lifting Solenoid Electromagnet
SKU: 890209- Operating Voltage: 24V DC
- Lifting Capacity: 8KG
- Size (D x L): 25 x 20 mm
- Electric lifting magnet.
- Powerful and compact.
- Smooth and flat surface.
- Low consumption and reliable.
- Ambient temperature within 130 degrees.
SKU: 890209 -
-
-
Solenoids and Electromagnets
DC 24V Solenoid Cabinet Door Lock
SKU: 544590- Holding force: 0.25kg
- Energized forms: intermittent
- Unlocking time: 1S
- Dimensions: 54 x 42 x 28 mm (LxWxH)
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
SKU: 544590 -
Futaba servo cable
SafeConnect Twisted 60CM 22AWG Servo Lead Extension (Futaba) Cable
SKU: 248711- High-Quality cable
- One male and one female connector.
- Twisted 60 cm Servo Lead Extention (Futaba)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
SKU: 248711