Motors | Drivers | Pumps | Actuators
Showing 337–384 of 1625 results
-
Other Metal Geared Motors
45RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137803- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 45 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 4.2
- Stall Torque(kg-cm): 16
SKU: 1137803 -
Cooling Fans
Sunon 5010 12VDC 0.84W Cooling Fan
SKU: 870204- Operating Voltage: 12VDC
- Power consumtion: 0.84W
- Body and Blade Constructed from Thermoplastic PBT of UL 94V-0
- Single Phase 4 Pole Brushless DC Motor
- Precise Vapo Bearing
- Counterclockwise Rotation Direction if Viewed from front of Fan Blade
SKU: 870204 -
-
Linear Actuators
Linear Actuator Stroke Length 100MM, 7mm/S, 1500N, 24V
SKU: 905295- Permanent magnet DC motor drive: Voltage 24V DC
- Self Locking Force: 1500N
- Working temperature: -20ºC to +63ºC
- Aluminium frame and extension tube
- Compact Design
- Built in Limit Switch
- Low Noise
- Moisture-proof Surface
- Long life: A service life of more than 50000 times.
SKU: 905295 -
-
-
-
-
-
Cooling Fans
DC24V 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50 x 50 x 15 mm
Cooling FansDC24V 5015 Oil Containing Centrifugal Fan with XH2.54-2P 30CM Cable Size:50 x 50 x 15 mm
SKU: 1187540- Model: R20XC
- USB Plug and Play.
- RFID reader 0-8cm Reading Distance.
- Win8/7/XP/Android Supported.
- S50/S70 Card Supported.
- OTG Phone Connection.
- Built-in buzzer and LED for identification.
SKU: 1187540 -
Cooling Fans
DC5V 0.25A 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187555- 45mm Radial Cooling fan.
- 5V 2-point Pin DC 0.25A.
- Type: Hydraulic
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187555 -
-
3D Printer Stepper Motors, Nema 23 Stepper Motors
JK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
3D Printer Stepper Motors, Nema 23 Stepper MotorsJK57HS112-3004-03 NEMA23 30.61 kg-cm Hybrid Bipolar Stepper Motor – D-Type Shaft
SKU: 770762- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
SKU: 770762 -
-
-
-
-
Orange 12V Rectangular Gearbox Motor
Orange TT555 12V 15RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
Orange 12V Rectangular Gearbox MotorOrange TT555 12V 15RPM Rectangular gearbox DC motor for DIY Project Encoder Compatible
SKU: 542687- Rated current (mA): ≤1400.
- Rated power (W): 3.960.
- Rated Torque (N-m): 315.6
- Rated speed: 15 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 3000.
- Back shaft for Encoder Available
SKU: 542687 -
-
-
Servo motor Accessories
GT POWER 3-Channel Multi Servo Tester
SKU: 57812- Operating Voltage: DC 4.8-6V
- Offer 3 modes to check servos or ESC
- The Manual Mode allows you to turn the knob to different speeds and check the reaction time
- The Neutral mode makes the servo go back to the neutral point
- The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible
- Connect to up to 3 servos simultaneously
- Full aluminum alloy housing
SKU: 57812 -
-
TowerPro and Other Servo Motors
SG 90 9G Mini Micro Servo plastic gear
SKU: 1119239- Item Name: SG90 Mini Analog Servo
- Operating Speed (4.8V no load): 0.12sec/60 degrees
- Stall torque: 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V)
- operating voltage: 3.0-7.2V
- Temperature range: -30℃~60℃
- Dead band width: 7us
- Item size: 3.2 x 3 x 1.2cm
- Item weight: about 9g
- Connector wire length: 24.5cm
SKU: 1119239 -
Emax Servo Motor
EMAX ES9251 II 4.5V-6V Plastic Micro Digital Servo 2.5gm for RC Models
SKU: 596521- Operating Voltage: 4.5~6.0V
- STD Direction: Counter Clockwise / Pulse Traveling 1500 to 1900usec
- Stall Torque: 4.8V 0.3 Kgf.cm
- Operating Speed: 4.8V 0.08 Sec/60° at no load
- Type: Digital
- Material: Plastic
SKU: 596521 -
Cooling Fans
DC12V 5015 Hydraulic Centrifugal Fan with XH2.54-2P 30CM Cable Size:50*50*15MM
SKU: 1187514- 45mm Radial Cooling fan.
- 12V 2-point Pin DC
- Made of high-quality PBT 30% glass line VO
- Bearing is a high precision, long life, and low noise.
- Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
SKU: 1187514 -
N20 Metal Gear Motors
N20-3V-100 RPM Micro Metal Gear-box DC Motor
SKU: 475122- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475122 -
N20 Metal Gear Motors
N20-3V-200 RPM Micro Metal Gear-box DC Motor
SKU: 475212- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475212 -
N20 Metal Gear Motors
N20-3V-50 RPM Micro Metal Gear-box DC Motor
SKU: 475076- This is a DC Mini Metal Gear Motor, ideal for making robots.
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
SKU: 475076 -
-
