(ESC) Drone Speed Controller
Showing 49–96 of 131 results
-
-
-
(ESC) Drone Speed Controller
Hobbywing XRotor FPV G2 ESC 4in1 65A
SKU: 1615380- Model: XRotor FPV G2
- LiPo Power input: 3S-6S
- Cont.Current: 65Ax4
- Burst Current: 80Ax4
- BEC Output:Â 5V@Â 0.6A
- Input wires: 12AWG-130mm (Red/Black)
- Output Wire: No wires but solder tabs
- Connectors: (In/Out) XT60 (w/ Wires Soldered on) /no
- Throttle Calibration: Supported
- ESC Programming: BLHeliSuite32
SKU: 1615380 -
(ESC) Drone Speed Controller
Hobbywing QuicRun WP 1080 G2 Brushed Electronic Speed Controller (ESC)
SKU: 1615373- Model: QuicRun WP 1080 G2 Brushed
- Cont. / Peak Current: 80A / 400A
- Motor Type: Brushed Motor (540 / 550 size motors)
- LiPo / NiMH Cells: 2-3S LiPo / 5-9S NiMH
- BEC Output: 6V / 7.4V / 8.4V @ 4A (Switch-mode)
- Programming Port: Separate Port
SKU: 1615373 -
(ESC) Drone Speed Controller
Hobbywing XRotor Pro 40A Drone ESC
SKU: 1615382- Model: XRotor Pro 40A
- Cont./Peak Current: 40A/60A
- Multicopter Applicable: 550/650 Class Quadcopter
- Bullet connector size: 3.5mm
- Programming item:ON/OFF of the DEO function
- Red Black cable length : 475mm
- Signal cable length : 560mm
SKU: 1615382 -
-
-
-
-
-
(ESC) Drone Speed Controller
USB Linker Programmer Brushless ESC BLHeli Parameter Setter BLHeliSuite Open Source Speed Control Programming for RC FPV Drone
(ESC) Drone Speed ControllerUSB Linker Programmer Brushless ESC BLHeli Parameter Setter BLHeliSuite Open Source Speed Control Programming for RC FPV Drone
SKU: 1504094- BL-S/BL-32 can use BLHeli-16 and BLHeli-32 software. (Connect the ESC signal line end to the computer USB interface and connect with the assistant software.)
- BLHeli-16 software Supports ESC of SIL and ATMEL chips ;BLHeli-32 software Supports ESC of STM chips.
- Convenient to set up various functions of open source ESC on the computer.
- The ESC can be set to one-way or two-way, and the motor starts current size. One-way ESC commutation.
- BLHeli open source ESC special.
SKU: 1504094 -
-
-
-
-
-
-
-
(ESC) Drone Speed Controller
T Motor Alpha 40A 6S Esc
SKU: 1241806- Model: ALPHA 40A
- Brand: T-motor
- Voltage: 4-6S ( 18-25.2V)
- Current: 40A
- Throttle range: 1100-1940μs
- Special core program for multi-rotor controller greatly improve throttle response
- Power by independence stabilivolt IC supply microprocessor is with better antijamming performance for stability
SKU: 1241806 -
(ESC) Drone Speed Controller
One Shot BLHeli_32 35A 32 bit 2-5S ESC
SKU: 1214280- Input: 2-5S input Maximum input 6S (close brake)
- 32bit architecture
- Telemetry capability (voltage, current, temperature, speed)
- All inputs and outputs are protected against overvoltage (~30V) and under voltage (~-30V). 3,3 and 5V capable
- Supports all common Dshot commands like Turtle Mode, 3D mode and change of rotation
- Overcurrent protection (measures the current and reduces it to max. 40A)
SKU: 1214280