(ESC) Drone Speed Controller
Showing 97–131 of 131 results
-
-
(ESC) Drone Speed Controller
Hobbywing Skywalker-60A- UBEC
SKU: 11192051 Output: Continuous 60A, Burst 80A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
6 Size: 77mm*35mm*14mm.
7 Weight: 63gSKU: 1119205 -
(ESC) Drone Speed Controller
Hobbywing quickrun 1060 60A brushed ESC1073166
SKU: 1119199- Model: Wp-1060-BRUSHED
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Power Rating Upto 60 Amps
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 3A/5V (Linear Mode)
- PWM Frequency: 1KHz
- Battery Compatibility LiPo/NiMh
- Battery Connector Type Tamiya Connector
- Motor Connector Type 4mm Bullet Classic Crimp Terminal
SKU: 1119199 -
(ESC) Drone Speed Controller
Hobbywing Quicrun 1:10 1/8 Wp Crawler Borstel Geborsteld 80A ESC
SKU: 1119200- Input Voltage: 2-3S Lipo/5-9 Cell NiMH
- Cont./Peak Current: 80A/400A
- Power Rating Upto 80 Amps
- Battery Connector Type XT-60
- BEC Output: Switch Mode: 6V/7.4V@3A
- Battery Compatibility LiPo/NiMh
SKU: 1119200 -
-
-
-
(ESC) Drone Speed Controller
Hobbywing Skywalker- 80A UBEC
SKU: 11192061 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)SKU: 1119206 -
-
(ESC) Drone Speed Controller
T Motor Flame 60A Hv Esc
SKU: 1092909- Output:Â Â Continuous 60A, Burst 80A up to 10 Secs.
- Input Voltage:Â 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC:Â Â Pentium-60A: 3A / 5V (Switch mode).
- Max Speed:Â 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor)
SKU: 1092909 -
-
-
(ESC) Drone Speed Controller
DYS 30A Brushless ESC for FPV Drone
SKU: 988116- Model: XSD30A
- Processor:Â Silabs EFM8BB21
- Battery: 2-5S Lipo
- Current Rating: 30Amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: 988116 -
(ESC) Drone Speed Controller
DYS 60A Brushless Speed Controller ARIA 4-in-1 ESC (Original)
SKU: 867295- Strong anti-interference ability
- PCB adopts 6-layer, low inner resistance
- Built-in Current detection module, which can cooperate with the flight control to detect the current value
- Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
- The Dshot series calls the 150/300/600/1200
- Support 2S-6S, 4PWM input without BEC
SKU: 867295 -
(ESC) Drone Speed Controller
DYS 45A Brushless Speed Controller ARIA 4-in-1 ESC (Original)
SKU: 867294- Strong anti-interference ability
- PCB adopts 6-layer, low inner resistance
- Built-in Current detection module, which can cooperate with the flight control to detect the current value
- Support for Oneshot125/Oneshot42 / Multshot /Dshot BL32.7 firmware
- The Dshot series calls the 150/300/600/1200
- Support 2S-6S, 4PWM input without BEC
SKU: 867294 -
(ESC) Drone Speed Controller
DYS XSD12A ESC Solder Version (Original)
SKU: 867288- Model: XSD12AÂ Solder version
- Processor:Â Silabs EFM8BB21
- Battery: (2-3S Lipo)
- Current Rating: 12amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: 1-2ms signal, Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: 867288 -
(ESC) Drone Speed Controller
Quanum 30A Multi-Copter Brushless Speed Controller Programmable with 5V/3A BEC (Original)
(ESC) Drone Speed ControllerQuanum 30A Multi-Copter Brushless Speed Controller Programmable with 5V/3A BEC (Original)
SKU: 867292- Product: Quanum 30A Multi-Copter Brushless Speed Controller
-
Running current: 30A(Output: Continuous 30A, Burst 40A up to 10 Secs.)
-
 Input Voltage: DC 6-16.8V(2-4S Lixx)
-
BEC: 5V/2A.
-
 With SimonK updated firmware for Multi-Copter
SKU: 867292 -
(ESC) Drone Speed Controller
DYS XSD20A ESC Solder Version (Original)
SKU: 867289- Model: XSD20AÂ Solder version
- Processor:Â Silabs EFM8BB21
- Battery: 12.6-16.8V (3-4S Lipo)
- Current Rating: 20Amp
- BEC: No (OPTO)
- Signal frequency: 20-500Hz
- Firmware: BLHeli_S (bootloader and firmware)
- Supports: 1-2ms signal, Dshot600/Dshot300
- BLHeli_S does Damped Light only
SKU: 867289 -
(ESC) Drone Speed Controller
Quanum 40A Multi-Copter Brushless Speed Controller Programmable ESC with 5V/3A BEC (Original)
(ESC) Drone Speed ControllerQuanum 40A Multi-Copter Brushless Speed Controller Programmable ESC with 5V/3A BEC (Original)
SKU: 867293-
Running current: 40A(Output: Continuous 40A, Burst 60A up to 10 Secs.)
-
 Input Voltage: DC 6-22.2V(2-4S Lixx)
-
BEC: 5V/3A
-
 With SimonK updated firmware for Multi-Copter
SKU: 867293 -
-
-
(ESC) Drone Speed Controller
XRotor Micro 30A BLHeli_S OneShot125 ESC with Wires for FPV Racing
SKU: 127287- Stick Programming: Stick Programming/BLHeliSuite
- Developed specifically for FPV drone racing multi-rotors
- Supports BLHeli-S, Oneshot125
- Compatible with various flight controllers and supports a signal frequency up to 621Hz
- Twisted pair cable to throttle which reduces crosstalk.
SKU: 127287 -
(ESC) Drone Speed Controller
EMAX 4x30A 2-4S 4in1 ESC for Multirotor (Original)
SKU: 29165- Run on SimonK firmware, optimized to achieve best flight performance
- Integrated with four ESCs, yet require only one power supply
- Space saving design, easy repair, and replacement
- BEC board, control board, and power board are separated
- Motor wire sockets are not soldered
- Built with low-voltage and overheating protections as well as self-check function
- Throttle range can be set for each ESC, compatible with a variety of receivers
- High-efficiency UBEC with only one set of BEC voltage output wire
SKU: 29165 -
(ESC) Drone Speed Controller
DYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)
(ESC) Drone Speed ControllerDYS 30Amp Mini Opto BLHeli Multi-Rotor Electronic Speed Controller (BLHeli Firmware) SN30A (Original)
SKU: 18270- Designed specifically for multi-rotors
- Twisted servo cable to reduce interference
- Fast throttle response
- Low resistance MOSFETs
- Small and lightweight
- Thicker PCB for better heat dissipation
SKU: 18270