Relays / Contactors
-
1 channel 5V 10A Relay Control Board Module with Optocoupler
SKU: 25289₹ 89.00(inc GST)
₹ 75.42 (+18% GST extra)
- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
-
1 Channel 5V 10A Relay Module For Arduino PIC AVR DSP ARM
SKU: 9716₹ 79.00(inc GST)
₹ 66.95 (+18% GST extra)
- Max Current : 20mA
- Relay Contact Current Capacity at AC250V: 10A
- Relay Contact Current Capacity at DC30: 10A
- One normally closed contact and one normally open contact
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator lamp
-
1 Road/Channel Relay Module (with light coupling) 12V
SKU: 31186₹ 139.00(inc GST)
₹ 117.8 (+18% GST extra)
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
-
1 Road/Channel Relay Module (with light coupling) 24V
SKU: 31206₹ 149.00(inc GST)
₹ 126.27 (+18% GST extra)
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
-
12V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
SKU: 28443₹ 749.00(inc GST)
₹ 634.75 (+18% GST extra)
- 12V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
-
12V Dual Channel Relay Module (with Light Coupling)
SKU: 31210₹ 189.00(inc GST)
₹ 160.17 (+18% GST extra)
- Operating Voltage: 12V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
-
24V 4-Channel Relay Module (with Light Coupling)
SKU: 31227₹ 249.00(inc GST)
₹ 211.02 (+18% GST extra)
- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
-
24V 6 channel with light coupling relay
SKU: 618389₹ 499.00(inc GST)
- 2V relay with AC contact capacity of 10A 250V and optocoupler protection.
- The onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full-on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
-
24V Dual Channel Relay Module (with Light Coupling)
SKU: 31217₹ 209.00(inc GST)
₹ 177.12 (+18% GST extra)
- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
-
4 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
SKU: 9729₹ 199.00(inc GST)
₹ 168.64 (+18% GST extra)
- Channel: 4 channel
- Relay Operating Voltage: 5V
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
-
4 Road/Channel Relay Module (with light coupling) 12V
SKU: 31219₹ 239.00(inc GST)
₹ 202.54 (+18% GST extra)
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
-
5V 1 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: 28487₹ 236.00(inc GST)
₹ 200 (+18% GST extra)
- Has been assembled, and electrical test passed.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 3-5V status high level, relay ON
-
5V 16 Channel Relay Module with Light Coupling LM2576 Power Supply
SKU: 400914₹ 699.00(inc GST)
₹ 592.37 (+18% GST extra)
- 5V relay with AC contact capacity of 10A 250V and optocoupler protection.
- Onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top -quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
-
5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: 28500₹ 290.00(inc GST)
₹ 245.76 (+18% GST extra)
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Input control signal voltage:
- 0-0.5V the state of low-level relay OFF
- 0.5-3.3V Unknown State
- 3.3-5V high-level relay ON
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
-
5V 2 channel USB PC Intelligent Control Relay Module
SKU: 31305₹ 435.00(inc GST)
₹ 368.64 (+18% GST extra)
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
-
5V 2A 8-Channel SSR G3MB-202P Solid State Relay Module
SKU: 28508₹ 990.00(inc GST)
₹ 838.98 (+18% GST extra)
- 8 channel 2 AMP Solid State Relay board
- Control 8 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Has been assembled, and the electrical test passed.
- Input control signal voltage:
- 0-2.5V status low level, relay OFF
- 2.5-20V status high level, relay ON
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
-
5V 4 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse – Good Quality
SKU: 28504₹ 690.00(inc GST)
₹ 584.75 (+18% GST extra)
- Has been assembled, and electrical test passed.
- Led indicator for each relay.
- Operating Voltage: 5V
- Operating Current: 12.5mA
- Maximum Load: 2A @ 240VAC
-
5V Dual Channel Relay Module
SKU: 31557₹ 135.00(inc GST)
₹ 114.41 (+18% GST extra)
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
-
6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle
SKU: 400057₹ 299.00(inc GST)
₹ 253.39 (+18% GST extra)
- Operating voltage: 6-30V
- Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
- Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
- Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
- Optocoupler Isolation.
-
8 Channel 12V Relay Module USB (PC Intelligent) Control Switch
SKU: 28545₹ 1,190.00(inc GST)
₹ 1008.47 (+18% GST extra)
- Square onboard USB interface for connection stability
- The use of imported high-performance USB controller chip
- Use the special relay driver chip ULN2803, relay work more stable
- Military grade PCB board production
- Input voltage: DC 12 V
- Input Current: more than 300mA
- Connection : NC / COM / NO
-
8 Channel 5V Solid State Relay Module Board OMRON for Arduino
SKU: 43107₹ 990.00(inc GST)
₹ 838.98 (+18% GST extra)
- 8-channel 2 AMP Solid State Relay board.
- Control 8 loads of up to 2 amps each at 120 V or 240 VAC.
- Good for lighting, Holiday displays etc.
- With 8 Solid State Relays: 2A at 100 to 240 VAC.(50/60 Hz).
- Power supply: 5 V DC(160 mA)
- Trigger Current: 2mA
- Trigger Voltage: 3.3V-5V
-
8 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
SKU: 9728₹ 449.00(inc GST)
₹ 380.51 (+18% GST extra)
- Channel: 8 channel
- Relay Operating Voltage: 5V
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
-
8 Road/Channel Relay Module (with light coupling) 12V
SKU: 31228₹ 499.00(inc GST)
₹ 422.88 (+18% GST extra)
- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
-
8 Road/Channel Relay Module (with light coupling) 24V
SKU: 31236₹ 549.00(inc GST)
₹ 465.25 (+18% GST extra)
- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
Add to cartThe product is already in the wishlist! Browse Wishlist -
DC 12V Switch Delay-Relay Module with Adjustable Delay Time 0~25 Second Signal Triggering Switch Module
SKU: 118315₹ 149.00(inc GST)
₹ 126.27 (+18% GST extra)
- Module based on: NE555 chip.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Standby no power consumption
- Countless Application and Information Sources.
- Time can be adjusted by a potentiometer, the default is 0-25 seconds.
- Module supplies a diode with an anti-power reverse connection.
-
ESP8266 10A DC 7-30V Network Relay WIFI Module
SKU: 314748₹ 499.00(inc GST)
₹ 422.88 (+18% GST extra)
- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
-
ESP8266 WiFi 5V 1 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 400m
SKU: 43225₹ 690.00(inc GST)
₹ 584.75 (+18% GST extra)
- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
-
L701 Microcomputer AC 240 V LCD Digital Display Programmable Electronic Timer Switch
SKU: 110569₹ 449.00(inc GST)
₹ 380.51 (+18% GST extra)
- 100% brand new and high quality.
- Widely used in street lights, neon lights, bells, radio and television equipment, production equipment, electrical equipment and household appliances automatic control.
- Built-in high-performance batteries as backup power in case of no electricity can still maintain time display and storage of.
- Auto timer error correction. (with an electron)
- Repeat programs with 16 on/off setting.
- Digital electronics general purpose time switch daily and programs.
-
Microcomputer DC 24 V LCD Digital Display Programmable Electronic Timer Switch
SKU: 110409₹ 449.00(inc GST)
₹ 380.51 (+18% GST extra)
- Widely used in street lights, neon lights, bells, radio and television equipment, production equipment, electrical equipment, and household appliances automatic control.
- Built-in high-performance batteries as backup power in case of no electricity can still maintain time display and storage.
- Auto timer error correction. (with an electron).
- Repeat programs with 16 on/off setting.
- Digital electronics general purpose time switch daily and programs.
-
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V
SKU: 43972₹ 120.00(inc GST)
₹ 101.69 (+18% GST extra)
- Module based on the NE555 chip.
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
-
NE555 Delay Monostable Switch Module Time Delay Switch Delay On Vehicle Electrical Delay 12V With optocoupletr
SKU: 43889₹ 199.00(inc GST)
₹ 168.64 (+18% GST extra)
- Timing from microseconds to long hours.
- Simple circuit design.
- Precision Pulse Generation / Timing.
- Adjustable Duty Cycle.
- Monostable Operation.
- Supply Voltage (V): 12
- Adjustable Time(s): 0 to 10
- AC Control Voltage(V): 0-250 @max. 10A
- DC Control Voltage(V): 0-30 @max. 10A
-
SmartElex Battle Relay
SKU: 55640₹ 590.00(inc GST)
₹ 500 (+18% GST extra)
- Max current and voltage:
- 10A @ 125VAC
- 7A @ 240VAC
- Relay resistance: 100 mΩ max
- 4.8V to 5.2V operating voltage
- 30mA typical draw from receiver
- Powerful auxiliary weapons control in RC combat.
- Glow plugs control in RC nitro vehicles.
- Max current and voltage:
-
SmartElex Dual Channel Battle Relay
SKU: 74971₹ 990.00(inc GST)
₹ 838.98 (+18% GST extra)
- Max current and voltage:
- 10A @ 120VAC
- 7A @ 250VAC
- 10A @ 24VDC
- Relay resistance: 100 mΩ max
- Module operating voltage: 4.8V to 5.2V
- 30mA typical draw from receiver
- Powerful auxiliary weapons control in RC combat.
- Glow plugs control in RC nitro vehicles.
- Max current and voltage:
-
Songle Single-channel 5V 30A Relay Module Power Failure Relay
SKU: 62465₹ 220.00(inc GST)
₹ 186.44 (+18% GST extra)
- Voltage version: 5V
- The static current: 5mA
- Working current: 190mA
- Trigger current: 2-4mA
- Optical coupling isolation, driving ability is strong, stable performance; Trigger current is 5mA
- The module can be set high level or low-level trigger by the jumper
- Rated current of the interface is 16A
-
USB Control 1 Channel Module 5V Relay Module
SKU: 31300₹ 390.00(inc GST)
₹ 330.51 (+18% GST extra)
- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
-
BattleSwitch radio controlled 10A relay (Dimension Engineering)
SKU: 6314₹ 1,984.00(inc GST)
₹ 1681.36 (+18% GST extra)
- 30mA typical draw from receiver
- 12-inch servo pigtail
- Max relay voltage: 240VAC
- Max relay current: 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC.
- Relay resistance: 100 mΩ max
- operating voltage: 3.5V to 5.5V (on servo pigtail)
