The Flight Controller (FC) serves as the brain of the aircraft, equipped with sensors to detect drone movements and user commands. It processes this data to precisely control the motor speed, enabling the drone to maneuver as directed.
Discover a diverse range of Quadcopter Flight Controllers at Robu. Our affordable and high-quality flight controllers are essential for drone enthusiasts. The extensive selection of FCs for FPV drones can be overwhelming, especially for beginners. Leave the task of choosing the right FC to us and enjoy your flight without worries. We are dedicated to providing FCs that continually evolve, becoming more compact, integrating advanced features, and utilizing superior processors and hardware. Trust us for your flight control needs.
Flight Controller & Accessories
Showing 1–48 of 166 results
-
Flight Controller & Accessories
Holybro Pixhawk 6X-RT (Developer Edition) Standard Set
SKU: R110845- High performance dual core i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
- Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
- Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
- MCU: i.MXRT1176
- Cortex-M7 @ 1GHz
- Cortex-M4 @ 400MHz
- 2MB SRAM
- 64MB Octal SPI Flash
SKU: R110845 -
Flight Controller & Accessories
Holybro Pixhawk 6X RPi CM4 Baseboard With PM03D Power module
SKU: R110846- integrated Components: Pixhawk Flight Controller module and Raspberry Pi CM4 companion computer
- Connection Standards: Pixhawk Connector and Autopilot Bus Standard
- Internal Connection: TELEM2
SKU: R110846 -
-
Flight Controller & Accessories
Holybro Digital Air Speed Pivot Tube Only
SKU: R110851- Type: Digital Air Speed Pitot Tube
- Measurement Range: Accurate over a wide range of airspeeds
- Interface: Digital
- Dimensions: Standard size for easy integration
- Weight: 20 g
- Material: High-quality materials for durability and longevity
SKU: R110851 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT40 Pivot Tube
SKU: R110848- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110848 -
Flight Controller & Accessories
Holybro Digital Air Speed Sensor(MS5525DSO) With PT60 Pivot Tube
SKU: R110849- Integrated Digital Pressure Sensor(24-bit ∆Σ ADC)
- Fast Conversion Down to 1 ms
- Low Power, 1 µA (standby < 0.15 µA)
- Supply Voltage: 1.8 to 3.6V
- Pressure Range: 1 to 30 PSI
- I2C and SPI Interface
SKU: R110849 -
-
-
-
Flight Controller & Accessories
SpeedyBee F405 Mini BLS 35A 20×20 Stack
SKU: R100760- MCU STM32F405
- IMU(Gyro) ICM42688P
- USB Port type Type-C
- Barometer Built-in OSD Chip AT7456E chip
- Power Input 3-6S LiPo.
- The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller.
SKU: R100760 -
Flight Controller & Accessories
SpeedyBee BLS 35A Mini V2 20×20 4-in-1 ESC
SKU: R100762- Firmware: BLHeli S J-H-40
- Continuous Current: 35A * 4
- Burst Current: 45A(5seconds)
- ESC Protocol: DSHOT300/600
- Power Input: 3-65 LiPo
- Power Output: VBAT(Battery voltage, used to power the flight controller)
SKU: R100762 -
-
Flight Controller & Accessories
 Pixhawk 6C (plastic case)
SKU: R100011- Advanced flight controller with PX4 Autopilot.
- STM32H743 processor up to 480 MHz for efficient processing.
- Redundant IMUs for reliability from Bosch & InvenSense.
- An integrated vibration isolation system ensures accurate readings.
- Suitable for academic, commercial, and research applications.
- Cost-effective design with high performance.
SKU: R100011 -
-
-
Flight Controller & Accessories
T Motor MINI F45A 6S 4IN1
SKU: 1800267- Mini body strong performance.
- Reliable & High-Quality MOSFET.
- Safeguard electronic components from vibration impact.
- Input Voltage: 3- 65
- ESC Firmware: BLHeli32
- Telemetry: Support
- galvanometer: Support
- Mounting pitch: 20 x 20mm
- Weight: 9.2g
- beta flight galvanometer ratio: 200
SKU: 1800267 -
Flight Controller & Accessories
Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
SKU: 1777637- Model: Holybro Tekko32 F4 Metal 4in1 65A ESC (65A)
- Metal-cased MOSFET
- Smooth control and quick response
- Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
SKU: 1777637 -
-
-
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
SKU: 1777620- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
- Fast F4 MCU: operating at 150MHz.
- PWM Frequency Range: Supports PWM frequencies ranging from 16k to 96k.
- Metal-Cased MOSFET: metal-cased MOSFET for efficient heat dissipation.
- On-Board Capacitance: on-board capacitance at 2068uF for effective noise filtering, enhancing signal quality.
- 3 oz Copper PCB Design
- Separate Drive & Control Circuit
SKU: 1777620 -
-
Flight Controller & Accessories
Holybro Tekko32 F4 4in1 Mini 50A ESC
SKU: 1777636- Model: Holybro Tekko32 F4 4in1 Mini 50A ESC
- Dimensions: 32 x 40 mm
- Supports DShot 150/300/600/1200/2400.
- Compatible with MultiShot, OneShot, Proshot, PWM, etc.
- ESC telemetry supported for enhanced monitoring.
SKU: 1777636 -
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
SKU: 1777617- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16k to 96k
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120 (V1.9 Version)
SKU: 1777617 -
Flight Controller & Accessories
Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
SKU: 1792279- Model: Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
- High-performance H7 Processor with clock speed up to 480 MHz
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
SKU: 1792279 -
Flight Controller & Accessories
Holybro PM08 Power Module (14S, 200A)
SKU: 1777629- Model: Holybro PM08 Power Module (14S, 200A)
- Support 2S – 14S Battery
- 200A Cont. Current Rating
- Easy to Setup
- Aluminum Case for Heat dissipation
- Dimensions: 101*45*26mm
- Mounting hole: 79mm*38.1mm
- Weight: 151g
SKU: 1777629 -
Flight Controller & Accessories
Holybro Pix32 V6 FC Module Only
SKU: 1812213- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: 1812213 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (GHR 10 Pin)
SKU: 1735923- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Pixhawk 4, Pixhawk 6C, Pixhawk 6X/5X with Mini Baseboard
- Cable Length (cm): 20
- Connector: JST GHR 10Pin to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735923 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (2.54 mm Dupont)
SKU: 1735921- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Durandal, Pixhawk 32 v6 & V5, Pixhawk 4 Mini, Pixhawk 6C Mini, Pixhawk 6X/5X Standard
Baseboard or RPI CM4 Baseboard - Cable Length (cm): 20
- Connector: 2.54mm Dupont to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735921 -
Flight Controller & Accessories
Holybro Kakute H743 Wing Flight Controller with Micro M10 GPS Module
SKU: 1720323- MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
- IMU: ICM-42688P (SPI3)
- Baro: BMP280 (I2C4)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card slot on SDMMC2
- 7x Uarts (1,2,3,5,6,7,8) with built-in inversion.
SKU: 1720323 -
-
-