SmartElex
Showing 49–96 of 100 results
-
Movement Sensors
SmartElex 6 Degrees of Freedom Breakout – LSM6DSO
SKU: R101054- Accelerometer measurement range: ±2/±4/±8/±16 g full scale
- Gyro measurement range: ±125/±250/±500/±1000/±2000 dps full scale
- Embedded temperature sensor: 16-bit resolution
- Operating voltage range: 1.71V to 3.6V / Typically 3.3V
SKU: R101054 -
-
Development Boards, Uncategorized
Milk-V Duo compact Embedded Development Board with 64M RAM with Header
Development Boards, UncategorizedMilk-V Duo compact Embedded Development Board with 64M RAM with Header
SKU: R108953- Model: Milk-V Duo
- MCU: 8051@8KB SRAM
- Memory: SIP DRAM 64MB
- TPU: 0.5TOPS@INT8
- OS Support: Linux, RTOS
- Power: 5V/1A
- GPIO: Up to 26x GPIO Pads
- Ethernet: 100Mbps ethernet with PHY
- Sensor Support: 4M@25fps
- CSI: 1x 16P FPC connector (MIPI CSI 2-lane)
SKU: R108953 -
IR Sensors
SmartElex Proximity Sensor Breakout – 20cm, VCNL4040
SKU: R101041- Model: VCNL4040
- Qualitative Detection Range: 20cm
- Integrated Modules: Infrared Emitter (IRED), Ambient Light Sensor (ALS), Proximity Sensor (PS)
- Operates ALS and PS in Parallel Structure
- Operating Voltage: 3.3V
- I2C Address: 0x60
SKU: R101041 -
-
IOT & Wireless Modules
Waveshare ESP32-GEEK Development Board, Based On ESP32-S3R2 Controller Chip, With 1.14inch 65K Color LCD, Supports WiFi & Bluetooth LE
IOT & Wireless ModulesWaveshare ESP32-GEEK Development Board, Based On ESP32-S3R2 Controller Chip, With 1.14inch 65K Color LCD, Supports WiFi & Bluetooth LE
SKU: 1878526- Microcontroller: ESP32-S3R2
- ROM: 384KB
- SRAM: 512KB
- PSRAM: 2MB
- Flash Memory (KB/MB): 16MB
- Display: 1.14-inch IPS LCD
- Display Resolution: 240×135 Pixels
- WIFI: 2.4GHz
SKU: 1878526 -
Development Boards
Milk-V Duo S compact Embedded Development Board with 8GB eMMC+ SD Slot
SKU: R108957- SoC: SG2000
- RISC-V CPU: C906@1Ghz + C906@700MHz
- Arm CPU: 1xCortex-A53 @ 1GHz
- MCU: 8051@8KB SRAM
- Memory: SIP DRAM 8GB
- OS Support: Linux, RTOS
- Power: 5V/1A
- DSI: Via GPIO Header (MIPI DSI 4-lane)
- Sensor Support: 5M@30fps
- Audio: Via GPIO Pin
SKU: R108957 -
Development Boards
Milk-V Duo compact Embedded Development Board with 256M RAM with Header
SKU: R108955- Arm CPU: 1xCortex-A53 @ 1GHz
- SoC: SG2002
- MCU: 8051@6KB SRAM
- Memory: SIP DRAM 256MB
- TPU: 1TOPS@INT8
- Storage: 1x microSD connector
- USB: 1 x Type-C for power and data, USB Pads available
- CSI: 1x 16P FPC connector (MIPI CSI 2-lane)
- Sensor Support: 5M@30fps
- OS Support: Linux, RTOS
SKU: R108955 -
Development Boards
DFRobot Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE, Battery Charging)
Development BoardsDFRobot Beetle ESP32 C6 Mini Development Board for Wireless Smart Wearable Device (Supports BLE, Battery Charging)
SKU: R110738- Processor: RISC-V single-core processor
- Main Frequency: 160 MHz
- Operating Voltage: 3.3V
- Type-C Input Voltage: 5V DC
- Operating Temperature: -10~60℃
- ROM: 320KB
- Flash: 4MB
SKU: R110738 -
-
Development Boards
Waveshare ESP32-S3 Development Board, Onboard 8×8 RGB LED Matrix and QMI8658C Attitude Sensor, Supports Wi-Fi and Bluetooth LE, ESP32 Development Board
Development BoardsWaveshare ESP32-S3 Development Board, Onboard 8×8 RGB LED Matrix and QMI8658C Attitude Sensor, Supports Wi-Fi and Bluetooth LE, ESP32 Development Board
SKU: R122634- Product: ESP32-S3 Development Board
- Processor: Xtensa 32-bit LX7 dual-core
- Connector: Type-C
- Flash memory: 4MB
- SRAM: 512KB
SKU: R122634 -
-
Current Sensors
SmartElex Current Sensor Breakout – ACS723 (Low Current)
SKU: R101038- DC and AC currents : 10mA up to 5A
- Full electrical isolation of measured and sensed circuits
- The version without the op-amp has a base sensitivity of 400mV/A
- Adjustable sensitivity with on-board amplifier, gain from 2.2 to 22 V/V
SKU: R101038 -
-
-
Movement Sensors
SmartElex Triple Axis Accelerometer Breakout – BMA400
SKU: R101057- Supply voltage range: 1.72 – 3.6V
- Ultra-Low current consumption: < 14.5µA at highest
- performance settings: I2C interface, SPI interface (disabled by default)
- I2C addresses: 0x14 (Default), 0x15
- Selectable acceleration ranges: o ±2/±4/±8/±16g
SKU: R101057 -
Environmental Sensors, Fuses with Leads, Sovol 3D Printers
Sovol SV07Plus (New Larger Klipper 3D Printer)
Environmental Sensors, Fuses with Leads, Sovol 3D PrintersSovol SV07Plus (New Larger Klipper 3D Printer)
SKU: R111194- Printing Technology: Fused Deposition Modeling (FDM)
- Print Head: Single extruder
- Nozzle Diameter: Standard 0.4 mm (Interchangeable)
- Layer Resolution: Up to 50 microns
- Print Speed: Up to 150 mm/s
SKU: R111194 -