F4 Flight Controller is a new generation of Flight Controller which uses the series STM32F4, 210MIPS ARM Micro – Controller. It contains a hardware Floating Point Unit (FPU), Which is a huge advance for autopilots hobby class. OpenPilot was 32bit from day one, and the FPU represents another step on the scale of the performance. The FPU makes accurate and low-latency processing of measures real using advanced algorithms to calculation and evaluation
Flip32 F2 works perfectly with RACE LIGHT – preloaded with RACEFIGHT or BetaFlight 3.0! Use the same and characteristics of CC3D REVO OpenPilot but with more functionality. FLEXI-IO PORT JST-SH 10-pin. The receiver port can act as an input port or output depending on the configuration that is in hardware settings.MAINPORT – JST – SH 4-pin .
In addition to an integral FPU, the STM32F405RGT6 chip has the ARM Cortex-M4 core at 210MIPS and saturation arithmetic DSP functions. The CPU has a range of built-in hardware modules that can be programmed once and function independently, requiring little to no CPU overhead. These include 14 multi-channel timers, 3 synchronous-sampling ADCs serving up to 24 channels, 2 DAC, matrix memory controller with 16-stream DMA.
Communication modules include USB2.0, 3 x I2C, 3 x SPI, 4 x USART, 2 x CAN and SIDO. All these modules can be configured for accessing the chip pins using a flexible switch matrix or disabled to save power. USB connectivity ensures that software updates and settings are straightforward to make in the GCS (Ground Control Station.)
The flight controller features a built-in 433MHz OPLink Modem and uses the standard OpenPilot footprint so has the same dimensions and mounting holes as the OpenPilot CC, CC3D, GPS, OSD and PipX boards. The Revo has an incredible array of functions to manage all of your flight parameters, and while it doesn’t have the kitchen sink, it does a real-time hardware calendar if you ever feel the need for a wake-up flight!
- Dshot support
- Drag and Drop OSD configured via Beta flight Configurator
- MPU6000 6 axis SPI Gyro & Accelerometer
- SBUS/PPM AND Spektrum DSMX Ports
- MicroSD card black box
- Onboard Video Filter(only can supply 5V to VTX and Camera)
- SmartAudio V2 via tx6 on J10
- 4×3 pin ESC pin layout
- IR pins for lap timing transponder
1 x F4 Flight Controller board
1 x 3*20Pin Header (Straight)
1 x 3*20 Pin Header (Right angle)