Search results: “orange lipos”
Showing 1–48 of 993 results
-
3 cell Lipo (11.1V ~ 12.6V)
Orange 11.1V 2200mAh 40C 3S Lithium Polymer Battery Pack
SKU: 30983- Model No: ORANGE 2200 3S-40C
- Weight :Â 175.0g.
- Voltage :Â 11.1V.
- Dimensions : 105 x34 x 22 mm
- Max Continuous Discharge : 40C(88.0A)
- Balance Plug : JST-XH
- Max Burst Discharge : 80C(176.0A)
- Discharge Plug : XT-60
SKU: 30983 -
3 cell Lipo (11.1V ~ 12.6V)
Orange 11.1V 2200mAh 30C 3S Lithium Polymer Battery Pack
SKU: 23741- Model No: ORANGE 2200/3S-30C
- Weight: 175.0g
- Voltage: 11.1V
- Dimensions :Â 23x34x106(mm )
- Max Continuous Discharge: 30C(66.0A)
- Balance Plug: JST-XH
- Max Burst Discharge: 60C(132.0A)
- Discharge Plug: XT-60
- Charge Rate : 1-3C Recommended, 5C Max
SKU: 23741 -
-
3 cell Lipo (11.1V ~ 12.6V)
Orange 3000mAh 3S 30C/60C Lithium polymer battery Pack (LiPo)
SKU: 23750- Model No: ORANGE 3000/3S-30C
- Weight : 215.0 gm
- Voltage :Â 11.1V
- Dimensions : 17 x 43 x 136(mm)
- Max Continuous Discharge : 30C(90.0A)
- Balance Plug : JST-XH
- Max Burst Discharge : 60C(180.0A)
- Discharge Plug : XT-60
This model has been discontinued, please consider SKU: 946972
SKU: 23750 -
3 cell Lipo (11.1V ~ 12.6V)
Orange 3000mAh 3S 40C/80C Lithium Polymer Battery Pack (LiPo)
SKU: 30989- Model No: ORANGE 3000/3S-40C
- Weight:Â 215.0g
- Voltage:Â 11.1V
- Balance Plug: JST-XH
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
This model has been discontinued, please consider SKU: 946973
SKU: 30989 -
-
Drone Transmitter and Receiver, Drone Accessories
RTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX
Drone Transmitter and Receiver, Drone AccessoriesRTF LC / L-C Power Filter LC-FILTER 2A 2-4S Lipo for FPV works & Immersion RC orange RX
SKU: 29739- Maximum Input Voltage: 16V
- Maximum Current: 2A
- L-C Filter circuit reduces DC supply noise
- Built-in Reverse Polarity protection
- Compact design
- The filter is an LC type that uses large value inductor and capacitor components.
- This filter can clean up the dirty power supply.
SKU: 29739 -
-
-
-
Raspberry Pi Accessories
PIMORONI LiPo/LiIon SHIM for Raspberry Pi Pico
SKU: 1033044- MCP73831 charger with 215mA charging current
- XB6096I2S battery protector
- Power button
- 2-pole JST PH connector, with polarity marked on the board
- Power and charging LED indicators
- Compatible with Raspberry Pi Pico
- Soldering required
SKU: 1033044 -
Lipo Voltage Checker
1-8S Lipo Battery Voltage Tester
SKU: 815782- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 815782 -
-
-
-
Battery Chargers, Ni-Mh | Li-po | Li-Ion Battery chargers
SKYRC PC1260 Dual Channel 12S LiPo Battery Charger
Battery Chargers, Ni-Mh | Li-po | Li-Ion Battery chargersSKYRC PC1260 Dual Channel 12S LiPo Battery Charger
SKU: 886264- Supports charging 2 packs of 12s LiPo batteries simultaneously
- Supports high voltage LiPo(LiHV) battery
- 3 Working modes: balance charge, storage & charge.
- Adjustable charging current
- 2×16 LCD screen
- Real-time charging/discharging status display
- Battery status meter
SKU: 886264 -
-
-
Refurbished, Refurbished Batteries | Chargers and Accessories
Refurbished – SKYRC PC1080 Dual Channel LiPo Battery Charger
Refurbished, Refurbished Batteries | Chargers and AccessoriesRefurbished – SKYRC PC1080 Dual Channel LiPo Battery Charger
SKU: R100175- Supports charging 2 packs of 6s LiPo batteries simultaneously
- Supports high voltage LiPo(LiHV) battery
- 3 Working modes: balance charge, storage & charge.
- Adjustable charging current
- 2×16 LCD screen
- Real time charging/discharging status display
- Battery status meter
SKU: R100175 -
-
-
Lipo Voltage Checker
Lipo Voltage Checker 1S-8S with Buzzer Alarm
SKU: 2753- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- Cell Voltage Display Range: 0.5v-4.5v
- Total Voltage Display Range: 3.7-36v
- Alarm set values: Off or 2.7-3.8v
SKU: 2753 -
-
-
-
-
-
-
-
-
ISDT Charger/Discharger
ISDT P20 500W/20A Dual Channel 1-6s Lipo Charger
SKU: 1627436- Input voltage DC 10~34V
- Output voltage DC 1~34V
- Max. input current 35A
- Charging current 0.2~20.0A x2
- Input anti-reverse function support
- Output anti-reverse function support
- Input anti-spark function support
- Output anti-spark function support
SKU: 1627436 -
-
-
-
-
-
-