Generic
Showing 673–720 of 6083 results
-
-
Stepper Motor Drivers
TMC2208 Stepper Motor Driver Module
SKU: 699623- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: 699623 -
-
-
-
Signal Generator Module & Oscilloscopes
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module
Signal Generator Module & OscilloscopesXY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module
SKU: 456188- LCD display frequency and duty cycle, very clear, PWM output can be set separately frequency and duty cycle.
- It can be used as a square wave signal generator, generate a square wave signal.
- It is very simple, will save parameters automatically, power off is not lost.
SKU: 456188 -
Breadboard and Zero PCBs
XD-42 5V/3.3V Dual Channel Solderless Breadboard Power Supply Module
SKU: 368546- Locking On/Off Switch
- Green LED Power Indicator
- Voltage Swapping Switch on both rail Channel
- Its concave design will not waste your proto zone.
- Easy to install on a breadboard with Compact portable size
SKU: 368546 -
-
-
-
-
-
-
Battery Harness
I Type 9V Battery, Clips Connector, Buckle with DC15CM, Black and Red Cable
SKU: 1121316- Supply voltage (V):9
- DC jack Size (mm):2.1
- Length of Cable (cm):10
- Length (mm):160
- Width (mm):26
- Height (mm):9
- Weight (gm):7
- Cable Length (cm):10
- Shipment Weight:0.01 kg
- Shipment Dimensions:5 × 5 × 3 cm
SKU: 1121316 -
-
IR and RF Transmitters and Receivers
HX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For Arduino
IR and RF Transmitters and ReceiversHX1838 VS1838 NEC Infrared IR Remote Control Sensor Module For Arduino
SKU: 31886- Crystal: the oscillation frequency of 455.
- Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
- Photo-detector and preamplifier in one package.
- Internal filter for PCM frequency.
- Improved shielding against EMI.
- Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
SKU: 31886 -
Boost Converter
120W 12-32V to 35-60V 6A DC-DC Boost Converter Module
SKU: 835760- Input voltage :12-32V
- Output voltage:35-60V (adjustable)
- Output Current: 10A (MAX)
- Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
SKU: 835760 -
-
Sleeves and Drag Chain
Nylon 12mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457716- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457716 -
-
-
-
Sleeves and Drag Chain
Nylon 16mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457743- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457743 -
Rotary Encoder
Correlation Photoelectric Infrared Count Slot Sensor Module 10 mm
SKU: 835790- The width of the optical coupling slot: 10mm
- Single signal output.
- The circuit board output switch!
- The output valid signal is low.
- Can be used for workpiece counts.
- It can also be used for industry counting, motor speed testing.
SKU: 835790 -
-
Battery Chargers, Battery Charging Boards
DC 5V Qi Standard Micro USB Input PCBA Circuit Board With Coil for Wireless Phone Charging (Transmitter)
Battery Chargers, Battery Charging BoardsDC 5V Qi Standard Micro USB Input PCBA Circuit Board With Coil for Wireless Phone Charging (Transmitter)
SKU: 766343- Plug and Play Module
- Micro-USB B type input
- LED Status Indicator
- Â Input voltage: DC5V
- Input current: 2A-1.5A
- Charging voltage: 5V
- Charging current: 1A-1.5A
- Charging power: 10W
SKU: 766343 -
-
-
